All of lore.kernel.org
 help / color / mirror / Atom feed
From: <gregkh@linuxfoundation.org>
To: david.spinadel@intel.com, gregkh@linuxfoundation.org,
	luciano.coelho@intel.com
Cc: <stable@vger.kernel.org>, <stable-commits@vger.kernel.org>
Subject: Patch "iwlwifi: mvm: enable RX offloading with TKIP and WEP" has been added to the 4.14-stable tree
Date: Mon, 11 Dec 2017 22:53:16 +0100	[thread overview]
Message-ID: <1513029196136218@kroah.com> (raw)


This is a note to let you know that I've just added the patch titled

    iwlwifi: mvm: enable RX offloading with TKIP and WEP

to the 4.14-stable tree which can be found at:
    http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=summary

The filename of the patch is:
     iwlwifi-mvm-enable-rx-offloading-with-tkip-and-wep.patch
and it can be found in the queue-4.14 subdirectory.

If you, or anyone else, feels it should not be added to the stable tree,
please let <stable@vger.kernel.org> know about it.


>From 9d0fc5a50a0548f8e5d61243e5e5f26d5c405aef Mon Sep 17 00:00:00 2001
From: David Spinadel <david.spinadel@intel.com>
Date: Mon, 21 Nov 2016 17:01:25 +0200
Subject: iwlwifi: mvm: enable RX offloading with TKIP and WEP

From: David Spinadel <david.spinadel@intel.com>

commit 9d0fc5a50a0548f8e5d61243e5e5f26d5c405aef upstream.

Set the flag that indicates that ICV was stripped on if
this option was enabled in the HW.

[this is needed for the 9000-series HW to work properly]
Signed-off-by: David Spinadel <david.spinadel@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/net/wireless/intel/iwlwifi/iwl-trans.h |    4 +++-
 drivers/net/wireless/intel/iwlwifi/mvm/rxmq.c  |   12 +++++++++---
 2 files changed, 12 insertions(+), 4 deletions(-)

--- a/drivers/net/wireless/intel/iwlwifi/iwl-trans.h
+++ b/drivers/net/wireless/intel/iwlwifi/iwl-trans.h
@@ -117,6 +117,7 @@
 #define FH_RSCSR_FRAME_INVALID		0x55550000
 #define FH_RSCSR_FRAME_ALIGN		0x40
 #define FH_RSCSR_RPA_EN			BIT(25)
+#define FH_RSCSR_RADA_EN		BIT(26)
 #define FH_RSCSR_RXQ_POS		16
 #define FH_RSCSR_RXQ_MASK		0x3F0000
 
@@ -128,7 +129,8 @@ struct iwl_rx_packet {
 	 * 31:    flag flush RB request
 	 * 30:    flag ignore TC (terminal counter) request
 	 * 29:    flag fast IRQ request
-	 * 28-26: Reserved
+	 * 28-27: Reserved
+	 * 26:    RADA enabled
 	 * 25:    Offload enabled
 	 * 24:    RPF enabled
 	 * 23:    RSS enabled
--- a/drivers/net/wireless/intel/iwlwifi/mvm/rxmq.c
+++ b/drivers/net/wireless/intel/iwlwifi/mvm/rxmq.c
@@ -232,8 +232,8 @@ static void iwl_mvm_get_signal_strength(
 
 static int iwl_mvm_rx_crypto(struct iwl_mvm *mvm, struct ieee80211_hdr *hdr,
 			     struct ieee80211_rx_status *stats,
-			     struct iwl_rx_mpdu_desc *desc, int queue,
-			     u8 *crypt_len)
+			     struct iwl_rx_mpdu_desc *desc, u32 pkt_flags,
+			     int queue, u8 *crypt_len)
 {
 	u16 status = le16_to_cpu(desc->status);
 
@@ -272,6 +272,10 @@ static int iwl_mvm_rx_crypto(struct iwl_
 		if ((status & IWL_RX_MPDU_STATUS_SEC_MASK) ==
 				IWL_RX_MPDU_STATUS_SEC_WEP)
 			*crypt_len = IEEE80211_WEP_IV_LEN;
+
+		if (pkt_flags & FH_RSCSR_RADA_EN)
+			stats->flag |= RX_FLAG_ICV_STRIPPED;
+
 		return 0;
 	case IWL_RX_MPDU_STATUS_SEC_EXT_ENC:
 		if (!(status & IWL_RX_MPDU_STATUS_MIC_OK))
@@ -812,7 +816,9 @@ void iwl_mvm_rx_mpdu_mq(struct iwl_mvm *
 
 	rx_status = IEEE80211_SKB_RXCB(skb);
 
-	if (iwl_mvm_rx_crypto(mvm, hdr, rx_status, desc, queue, &crypt_len)) {
+	if (iwl_mvm_rx_crypto(mvm, hdr, rx_status, desc,
+			      le32_to_cpu(pkt->len_n_flags), queue,
+			      &crypt_len)) {
 		kfree_skb(skb);
 		return;
 	}


Patches currently in stable-queue which might be from david.spinadel@intel.com are

queue-4.14/iwlwifi-mvm-enable-rx-offloading-with-tkip-and-wep.patch

                 reply	other threads:[~2017-12-11 21:54 UTC|newest]

Thread overview: [no followups] expand[flat|nested]  mbox.gz  Atom feed

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1513029196136218@kroah.com \
    --to=gregkh@linuxfoundation.org \
    --cc=david.spinadel@intel.com \
    --cc=luciano.coelho@intel.com \
    --cc=stable-commits@vger.kernel.org \
    --cc=stable@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.