From: <gregkh@linuxfoundation.org>
To: linux@roeck-us.net, alexander.levin@verizon.com,
gregkh@linuxfoundation.org, peda@axentia.se,
qi.hou@windriver.com, robh@kernel.org, tony@atomide.com
Cc: <stable@vger.kernel.org>, <stable-commits@vger.kernel.org>
Subject: Patch "ARM: OMAP2+: Fix device node reference counts" has been added to the 4.4-stable tree
Date: Tue, 12 Dec 2017 13:43:40 +0100 [thread overview]
Message-ID: <151308262020595@kroah.com> (raw)
This is a note to let you know that I've just added the patch titled
ARM: OMAP2+: Fix device node reference counts
to the 4.4-stable tree which can be found at:
http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=summary
The filename of the patch is:
arm-omap2-fix-device-node-reference-counts.patch
and it can be found in the queue-4.4 subdirectory.
If you, or anyone else, feels it should not be added to the stable tree,
please let <stable@vger.kernel.org> know about it.
>From foo@baz Tue Dec 12 13:38:50 CET 2017
From: Guenter Roeck <linux@roeck-us.net>
Date: Sat, 4 Mar 2017 07:02:10 -0800
Subject: ARM: OMAP2+: Fix device node reference counts
From: Guenter Roeck <linux@roeck-us.net>
[ Upstream commit 10e5778f54765c96fe0c8f104b7a030e5b35bc72 ]
After commit 0549bde0fcb1 ("of: fix of_node leak caused in
of_find_node_opts_by_path"), the following error may be
reported when running omap images.
OF: ERROR: Bad of_node_put() on /ocp@68000000
CPU: 0 PID: 0 Comm: swapper Not tainted 4.10.0-rc7-next-20170210 #1
Hardware name: Generic OMAP3-GP (Flattened Device Tree)
[<c0310604>] (unwind_backtrace) from [<c030bbf4>] (show_stack+0x10/0x14)
[<c030bbf4>] (show_stack) from [<c05add8c>] (dump_stack+0x98/0xac)
[<c05add8c>] (dump_stack) from [<c05af1b0>] (kobject_release+0x48/0x7c)
[<c05af1b0>] (kobject_release)
from [<c0ad1aa4>] (of_find_node_by_name+0x74/0x94)
[<c0ad1aa4>] (of_find_node_by_name)
from [<c1215bd4>] (omap3xxx_hwmod_is_hs_ip_block_usable+0x24/0x2c)
[<c1215bd4>] (omap3xxx_hwmod_is_hs_ip_block_usable) from
[<c1215d5c>] (omap3xxx_hwmod_init+0x180/0x274)
[<c1215d5c>] (omap3xxx_hwmod_init)
from [<c120faa8>] (omap3_init_early+0xa0/0x11c)
[<c120faa8>] (omap3_init_early)
from [<c120fb2c>] (omap3430_init_early+0x8/0x30)
[<c120fb2c>] (omap3430_init_early)
from [<c1204710>] (setup_arch+0xc04/0xc34)
[<c1204710>] (setup_arch) from [<c1200948>] (start_kernel+0x68/0x38c)
[<c1200948>] (start_kernel) from [<8020807c>] (0x8020807c)
of_find_node_by_name() drops the reference to the passed device node.
The commit referenced above exposes this problem.
To fix the problem, use of_get_child_by_name() instead of
of_find_node_by_name(); of_get_child_by_name() does not drop
the reference count of passed device nodes. While semantically
different, we only look for immediate children of the passed
device node, so of_get_child_by_name() is a more appropriate
function to use anyway.
Release the reference to the device node obtained with
of_get_child_by_name() after it is no longer needed to avoid
another device node leak.
While at it, clean up the code and change the return type of
omap3xxx_hwmod_is_hs_ip_block_usable() to bool to match its use
and the return type of of_device_is_available().
Cc: Qi Hou <qi.hou@windriver.com>
Cc: Peter Rosin <peda@axentia.se>
Cc: Rob Herring <robh@kernel.org>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
arch/arm/mach-omap2/omap_hwmod_3xxx_data.c | 16 ++++++++++------
1 file changed, 10 insertions(+), 6 deletions(-)
--- a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c
@@ -3885,16 +3885,20 @@ static struct omap_hwmod_ocp_if *omap3xx
* Return: 0 if device named @dev_name is not likely to be accessible,
* or 1 if it is likely to be accessible.
*/
-static int __init omap3xxx_hwmod_is_hs_ip_block_usable(struct device_node *bus,
- const char *dev_name)
+static bool __init omap3xxx_hwmod_is_hs_ip_block_usable(struct device_node *bus,
+ const char *dev_name)
{
+ struct device_node *node;
+ bool available;
+
if (!bus)
- return (omap_type() == OMAP2_DEVICE_TYPE_GP) ? 1 : 0;
+ return omap_type() == OMAP2_DEVICE_TYPE_GP;
- if (of_device_is_available(of_find_node_by_name(bus, dev_name)))
- return 1;
+ node = of_get_child_by_name(bus, dev_name);
+ available = of_device_is_available(node);
+ of_node_put(node);
- return 0;
+ return available;
}
int __init omap3xxx_hwmod_init(void)
Patches currently in stable-queue which might be from linux@roeck-us.net are
queue-4.4/arm-omap2-release-device-node-after-it-is-no-longer-needed.patch
queue-4.4/arm-omap2-fix-device-node-reference-counts.patch
reply other threads:[~2017-12-12 12:43 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=151308262020595@kroah.com \
--to=gregkh@linuxfoundation.org \
--cc=alexander.levin@verizon.com \
--cc=linux@roeck-us.net \
--cc=peda@axentia.se \
--cc=qi.hou@windriver.com \
--cc=robh@kernel.org \
--cc=stable-commits@vger.kernel.org \
--cc=stable@vger.kernel.org \
--cc=tony@atomide.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.