All of lore.kernel.org
 help / color / mirror / Atom feed
From: <gregkh@linuxfoundation.org>
To: tommi.t.rantala@nokia.com, davem@davemloft.net,
	gregkh@linuxfoundation.org, jon.maloy@ericsson.com
Cc: <stable@vger.kernel.org>, <stable-commits@vger.kernel.org>
Subject: Patch "tipc: call tipc_rcv() only if bearer is up in tipc_udp_recv()" has been added to the 4.9-stable tree
Date: Thu, 14 Dec 2017 18:43:15 +0100	[thread overview]
Message-ID: <151327339510264@kroah.com> (raw)


This is a note to let you know that I've just added the patch titled

    tipc: call tipc_rcv() only if bearer is up in tipc_udp_recv()

to the 4.9-stable tree which can be found at:
    http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=summary

The filename of the patch is:
     tipc-call-tipc_rcv-only-if-bearer-is-up-in-tipc_udp_recv.patch
and it can be found in the queue-4.9 subdirectory.

If you, or anyone else, feels it should not be added to the stable tree,
please let <stable@vger.kernel.org> know about it.


>From foo@baz Thu Dec 14 11:45:58 CET 2017
From: Tommi Rantala <tommi.t.rantala@nokia.com>
Date: Wed, 29 Nov 2017 12:48:42 +0200
Subject: tipc: call tipc_rcv() only if bearer is up in tipc_udp_recv()

From: Tommi Rantala <tommi.t.rantala@nokia.com>


[ Upstream commit c7799c067c2ae33e348508c8afec354f3257ff25 ]

Remove the second tipc_rcv() call in tipc_udp_recv(). We have just
checked that the bearer is not up, and calling tipc_rcv() with a bearer
that is not up leads to a TIPC div-by-zero crash in
tipc_node_calculate_timer(). The crash is rare in practice, but can
happen like this:

  We're enabling a bearer, but it's not yet up and fully initialized.
  At the same time we receive a discovery packet, and in tipc_udp_recv()
  we end up calling tipc_rcv() with the not-yet-initialized bearer,
  causing later the div-by-zero crash in tipc_node_calculate_timer().

Jon Maloy explains the impact of removing the second tipc_rcv() call:
  "link setup in the worst case will be delayed until the next arriving
   discovery messages, 1 sec later, and this is an acceptable delay."

As the tipc_rcv() call is removed, just leave the function via the
rcu_out label, so that we will kfree_skb().

[   12.590450] Own node address <1.1.1>, network identity 1
[   12.668088] divide error: 0000 [#1] SMP
[   12.676952] CPU: 2 PID: 0 Comm: swapper/2 Not tainted 4.14.2-dirty #1
[   12.679225] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-2.fc27 04/01/2014
[   12.682095] task: ffff8c2a761edb80 task.stack: ffffa41cc0cac000
[   12.684087] RIP: 0010:tipc_node_calculate_timer.isra.12+0x45/0x60 [tipc]
[   12.686486] RSP: 0018:ffff8c2a7fc838a0 EFLAGS: 00010246
[   12.688451] RAX: 0000000000000000 RBX: ffff8c2a5b382600 RCX: 0000000000000000
[   12.691197] RDX: 0000000000000000 RSI: ffff8c2a5b382600 RDI: ffff8c2a5b382600
[   12.693945] RBP: ffff8c2a7fc838b0 R08: 0000000000000001 R09: 0000000000000001
[   12.696632] R10: 0000000000000000 R11: 0000000000000000 R12: ffff8c2a5d8949d8
[   12.699491] R13: ffffffff95ede400 R14: 0000000000000000 R15: ffff8c2a5d894800
[   12.702338] FS:  0000000000000000(0000) GS:ffff8c2a7fc80000(0000) knlGS:0000000000000000
[   12.705099] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[   12.706776] CR2: 0000000001bb9440 CR3: 00000000bd009001 CR4: 00000000003606e0
[   12.708847] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[   12.711016] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[   12.712627] Call Trace:
[   12.713390]  <IRQ>
[   12.714011]  tipc_node_check_dest+0x2e8/0x350 [tipc]
[   12.715286]  tipc_disc_rcv+0x14d/0x1d0 [tipc]
[   12.716370]  tipc_rcv+0x8b0/0xd40 [tipc]
[   12.717396]  ? minmax_running_min+0x2f/0x60
[   12.718248]  ? dst_alloc+0x4c/0xa0
[   12.718964]  ? tcp_ack+0xaf1/0x10b0
[   12.719658]  ? tipc_udp_is_known_peer+0xa0/0xa0 [tipc]
[   12.720634]  tipc_udp_recv+0x71/0x1d0 [tipc]
[   12.721459]  ? dst_alloc+0x4c/0xa0
[   12.722130]  udp_queue_rcv_skb+0x264/0x490
[   12.722924]  __udp4_lib_rcv+0x21e/0x990
[   12.723670]  ? ip_route_input_rcu+0x2dd/0xbf0
[   12.724442]  ? tcp_v4_rcv+0x958/0xa40
[   12.725039]  udp_rcv+0x1a/0x20
[   12.725587]  ip_local_deliver_finish+0x97/0x1d0
[   12.726323]  ip_local_deliver+0xaf/0xc0
[   12.726959]  ? ip_route_input_noref+0x19/0x20
[   12.727689]  ip_rcv_finish+0xdd/0x3b0
[   12.728307]  ip_rcv+0x2ac/0x360
[   12.728839]  __netif_receive_skb_core+0x6fb/0xa90
[   12.729580]  ? udp4_gro_receive+0x1a7/0x2c0
[   12.730274]  __netif_receive_skb+0x1d/0x60
[   12.730953]  ? __netif_receive_skb+0x1d/0x60
[   12.731637]  netif_receive_skb_internal+0x37/0xd0
[   12.732371]  napi_gro_receive+0xc7/0xf0
[   12.732920]  receive_buf+0x3c3/0xd40
[   12.733441]  virtnet_poll+0xb1/0x250
[   12.733944]  net_rx_action+0x23e/0x370
[   12.734476]  __do_softirq+0xc5/0x2f8
[   12.734922]  irq_exit+0xfa/0x100
[   12.735315]  do_IRQ+0x4f/0xd0
[   12.735680]  common_interrupt+0xa2/0xa2
[   12.736126]  </IRQ>
[   12.736416] RIP: 0010:native_safe_halt+0x6/0x10
[   12.736925] RSP: 0018:ffffa41cc0cafe90 EFLAGS: 00000246 ORIG_RAX: ffffffffffffff4d
[   12.737756] RAX: 0000000000000000 RBX: ffff8c2a761edb80 RCX: 0000000000000000
[   12.738504] RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000000
[   12.739258] RBP: ffffa41cc0cafe90 R08: 0000014b5b9795e5 R09: ffffa41cc12c7e88
[   12.740118] R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000002
[   12.740964] R13: ffff8c2a761edb80 R14: 0000000000000000 R15: 0000000000000000
[   12.741831]  default_idle+0x2a/0x100
[   12.742323]  arch_cpu_idle+0xf/0x20
[   12.742796]  default_idle_call+0x28/0x40
[   12.743312]  do_idle+0x179/0x1f0
[   12.743761]  cpu_startup_entry+0x1d/0x20
[   12.744291]  start_secondary+0x112/0x120
[   12.744816]  secondary_startup_64+0xa5/0xa5
[   12.745367] Code: b9 f4 01 00 00 48 89 c2 48 c1 ea 02 48 3d d3 07 00
00 48 0f 47 d1 49 8b 0c 24 48 39 d1 76 07 49 89 14 24 48 89 d1 31 d2 48
89 df <48> f7 f1 89 c6 e8 81 6e ff ff 5b 41 5c 5d c3 66 90 66 2e 0f 1f
[   12.747527] RIP: tipc_node_calculate_timer.isra.12+0x45/0x60 [tipc] RSP: ffff8c2a7fc838a0
[   12.748555] ---[ end trace 1399ab83390650fd ]---
[   12.749296] Kernel panic - not syncing: Fatal exception in interrupt
[   12.750123] Kernel Offset: 0x13200000 from 0xffffffff82000000
(relocation range: 0xffffffff80000000-0xffffffffbfffffff)
[   12.751215] Rebooting in 60 seconds..

Fixes: c9b64d492b1f ("tipc: add replicast peer discovery")
Signed-off-by: Tommi Rantala <tommi.t.rantala@nokia.com>
Cc: Jon Maloy <jon.maloy@ericsson.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 net/tipc/udp_media.c |    4 ----
 1 file changed, 4 deletions(-)

--- a/net/tipc/udp_media.c
+++ b/net/tipc/udp_media.c
@@ -371,10 +371,6 @@ static int tipc_udp_recv(struct sock *sk
 			goto rcu_out;
 	}
 
-	tipc_rcv(sock_net(sk), skb, b);
-	rcu_read_unlock();
-	return 0;
-
 rcu_out:
 	rcu_read_unlock();
 out:


Patches currently in stable-queue which might be from tommi.t.rantala@nokia.com are

queue-4.9/tipc-call-tipc_rcv-only-if-bearer-is-up-in-tipc_udp_recv.patch

                 reply	other threads:[~2017-12-14 17:43 UTC|newest]

Thread overview: [no followups] expand[flat|nested]  mbox.gz  Atom feed

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=151327339510264@kroah.com \
    --to=gregkh@linuxfoundation.org \
    --cc=davem@davemloft.net \
    --cc=jon.maloy@ericsson.com \
    --cc=stable-commits@vger.kernel.org \
    --cc=stable@vger.kernel.org \
    --cc=tommi.t.rantala@nokia.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.