Patch "mmc: core: apply NO_CMD23 quirk to some specific cards" has been added to the 4.14-stable tree

[<gregkh@linuxfoundation.org>]

This is a note to let you know that I've just added the patch titled

    mmc: core: apply NO_CMD23 quirk to some specific cards

to the 4.14-stable tree which can be found at:
    http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=summary

The filename of the patch is:
     mmc-core-apply-no_cmd23-quirk-to-some-specific-cards.patch
and it can be found in the queue-4.14 subdirectory.

If you, or anyone else, feels it should not be added to the stable tree,
please let <stable@vger.kernel.org> know about it.


>From 91516a2a4734614d62ee3ed921f8f88acc67c000 Mon Sep 17 00:00:00 2001
From: Christoph Fritz <chf.fritz@googlemail.com>
Date: Sat, 9 Dec 2017 23:47:55 +0100
Subject: mmc: core: apply NO_CMD23 quirk to some specific cards

From: Christoph Fritz <chf.fritz@googlemail.com>

commit 91516a2a4734614d62ee3ed921f8f88acc67c000 upstream.

To get an usdhc Apacer and some ATP SD cards work reliable, CMD23 needs
to be disabled.  This has been tested on i.MX6 (sdhci-esdhc) and rk3288
(dw_mmc-rockchip).

Without this patch on i.MX6 (sdhci-esdhc):

 $ dd if=/dev/urandom of=/mnt/test bs=1M count=10 conv=fsync

    | <mmc0: starting CMD23 arg 00000400 flags 00000015>
    | mmc0: starting CMD25 arg 00a71f00 flags 000000b5
    | mmc0:     blksz 512 blocks 1024 flags 00000100 tsac 3000 ms nsac 0
    | mmc0:     CMD12 arg 00000000 flags 0000049d
    | sdhci [sdhci_irq()]: *** mmc0 got interrupt: 0x00000001
    | mmc0: Timeout waiting for hardware interrupt.

Without this patch on rk3288 (dw_mmc-rockchip):

    | mmc1: Card stuck in programming state! mmcblk1 card_busy_detect
    | dwmmc_rockchip ff0c0000.dwmmc: Busy; trying anyway
    | mmc_host mmc1: Bus speed (slot 0) = 400000Hz (slot req 400000Hz,
    | actual 400000HZ div = 0)
    | mmc1: card never left busy state
    | mmc1: tried to reset card, got error -110
    | blk_update_request: I/O error, dev mmcblk1, sector 139778
    | Buffer I/O error on dev mmcblk1p1, logical block 131586, lost async
    | page write

Signed-off-by: Christoph Fritz <chf.fritz@googlemail.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/mmc/core/card.h   |    2 ++
 drivers/mmc/core/quirks.h |    8 ++++++++
 2 files changed, 10 insertions(+)

--- a/drivers/mmc/core/card.h
+++ b/drivers/mmc/core/card.h
@@ -75,9 +75,11 @@ struct mmc_fixup {
 #define EXT_CSD_REV_ANY (-1u)
 
 #define CID_MANFID_SANDISK      0x2
+#define CID_MANFID_ATP          0x9
 #define CID_MANFID_TOSHIBA      0x11
 #define CID_MANFID_MICRON       0x13
 #define CID_MANFID_SAMSUNG      0x15
+#define CID_MANFID_APACER       0x27
 #define CID_MANFID_KINGSTON     0x70
 #define CID_MANFID_HYNIX	0x90
 
--- a/drivers/mmc/core/quirks.h
+++ b/drivers/mmc/core/quirks.h
@@ -53,6 +53,14 @@ static const struct mmc_fixup mmc_blk_fi
 		  MMC_QUIRK_BLK_NO_CMD23),
 
 	/*
+	 * Some SD cards lockup while using CMD23 multiblock transfers.
+	 */
+	MMC_FIXUP("AF SD", CID_MANFID_ATP, CID_OEMID_ANY, add_quirk_sd,
+		  MMC_QUIRK_BLK_NO_CMD23),
+	MMC_FIXUP("APUSD", CID_MANFID_APACER, 0x5048, add_quirk_sd,
+		  MMC_QUIRK_BLK_NO_CMD23),
+
+	/*
 	 * Some MMC cards need longer data read timeout than indicated in CSD.
 	 */
 	MMC_FIXUP(CID_NAME_ANY, CID_MANFID_MICRON, 0x200, add_quirk_mmc,


Patches currently in stable-queue which might be from chf.fritz@googlemail.com are

queue-4.14/mmc-core-apply-no_cmd23-quirk-to-some-specific-cards.patch