All of lore.kernel.org
 help / color / mirror / Atom feed
From: <gregkh@linuxfoundation.org>
To: sara.sharon@intel.com, alexander.levin@verizon.com,
	axboe@kernel.dk, gregkh@linuxfoundation.org,
	kvalo@codeaurora.org, luciano.coelho@intel.com,
	torvalds@linux-foundation.org
Cc: <stable@vger.kernel.org>, <stable-commits@vger.kernel.org>
Subject: Patch "iwlwifi: mvm: cleanup pending frames in DQA mode" has been added to the 4.9-stable tree
Date: Mon, 18 Dec 2017 14:21:24 +0100	[thread overview]
Message-ID: <15136032843913@kroah.com> (raw)


This is a note to let you know that I've just added the patch titled

    iwlwifi: mvm: cleanup pending frames in DQA mode

to the 4.9-stable tree which can be found at:
    http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=summary

The filename of the patch is:
     iwlwifi-mvm-cleanup-pending-frames-in-dqa-mode.patch
and it can be found in the queue-4.9 subdirectory.

If you, or anyone else, feels it should not be added to the stable tree,
please let <stable@vger.kernel.org> know about it.


>From foo@baz Mon Dec 18 14:12:34 CET 2017
From: Sara Sharon <sara.sharon@intel.com>
Date: Tue, 14 Mar 2017 09:50:35 +0200
Subject: iwlwifi: mvm: cleanup pending frames in DQA mode

From: Sara Sharon <sara.sharon@intel.com>


[ Upstream commit 9a3fcf912ef7f5c6e18f9af6875dd13f7311f7aa ]

When a station is asleep, the fw will set it as "asleep".
All queues that are used only by one station will be stopped by
the fw.

In pre-DQA mode this was relevant for aggregation queues. However,
in DQA mode a queue is owned by one station only, so all queues
will be stopped.
As a result, we don't expect to get filtered frames back to
mac80211 and don't have to maintain the entire pending_frames
state logic, the same way as we do in aggregations.

The correct behavior is to align DQA behavior with the aggregation
queue behaviour pre-DQA:
- Don't count pending frames.
- Let mac80211 know we have frames in these queues so that it can
properly handle trigger frames.

When a trigger frame is received, mac80211 tells the driver to send
frames from the queues using release_buffered_frames.
The driver will tell the fw to let frames out even if the station
is asleep. This is done by iwl_mvm_sta_modify_sleep_tx_count.

Reported-and-tested-by: Jens Axboe <axboe@kernel.dk>
Reported-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sara Sharon <sara.sharon@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/net/wireless/intel/iwlwifi/mvm/mac80211.c |    5 +-
 drivers/net/wireless/intel/iwlwifi/mvm/sta.c      |   11 +++--
 drivers/net/wireless/intel/iwlwifi/mvm/sta.h      |    2 -
 drivers/net/wireless/intel/iwlwifi/mvm/tx.c       |   41 +++++++++-------------
 4 files changed, 28 insertions(+), 31 deletions(-)

--- a/drivers/net/wireless/intel/iwlwifi/mvm/mac80211.c
+++ b/drivers/net/wireless/intel/iwlwifi/mvm/mac80211.c
@@ -2320,7 +2320,7 @@ iwl_mvm_mac_release_buffered_frames(stru
 {
 	struct iwl_mvm *mvm = IWL_MAC80211_GET_MVM(hw);
 
-	/* Called when we need to transmit (a) frame(s) from agg queue */
+	/* Called when we need to transmit (a) frame(s) from agg or dqa queue */
 
 	iwl_mvm_sta_modify_sleep_tx_count(mvm, sta, reason, num_frames,
 					  tids, more_data, true);
@@ -2340,7 +2340,8 @@ static void iwl_mvm_mac_sta_notify(struc
 	for (tid = 0; tid < IWL_MAX_TID_COUNT; tid++) {
 		struct iwl_mvm_tid_data *tid_data = &mvmsta->tid_data[tid];
 
-		if (tid_data->state != IWL_AGG_ON &&
+		if (!iwl_mvm_is_dqa_supported(mvm) &&
+		    tid_data->state != IWL_AGG_ON &&
 		    tid_data->state != IWL_EMPTYING_HW_QUEUE_DELBA)
 			continue;
 
--- a/drivers/net/wireless/intel/iwlwifi/mvm/sta.c
+++ b/drivers/net/wireless/intel/iwlwifi/mvm/sta.c
@@ -3032,7 +3032,7 @@ void iwl_mvm_sta_modify_sleep_tx_count(s
 				       struct ieee80211_sta *sta,
 				       enum ieee80211_frame_release_type reason,
 				       u16 cnt, u16 tids, bool more_data,
-				       bool agg)
+				       bool single_sta_queue)
 {
 	struct iwl_mvm_sta *mvmsta = iwl_mvm_sta_from_mac80211(sta);
 	struct iwl_mvm_add_sta_cmd cmd = {
@@ -3052,14 +3052,14 @@ void iwl_mvm_sta_modify_sleep_tx_count(s
 	for_each_set_bit(tid, &_tids, IWL_MAX_TID_COUNT)
 		cmd.awake_acs |= BIT(tid_to_ucode_ac[tid]);
 
-	/* If we're releasing frames from aggregation queues then check if the
-	 * all queues combined that we're releasing frames from have
+	/* If we're releasing frames from aggregation or dqa queues then check
+	 * if all the queues that we're releasing frames from, combined, have:
 	 *  - more frames than the service period, in which case more_data
 	 *    needs to be set
 	 *  - fewer than 'cnt' frames, in which case we need to adjust the
 	 *    firmware command (but do that unconditionally)
 	 */
-	if (agg) {
+	if (single_sta_queue) {
 		int remaining = cnt;
 		int sleep_tx_count;
 
@@ -3069,7 +3069,8 @@ void iwl_mvm_sta_modify_sleep_tx_count(s
 			u16 n_queued;
 
 			tid_data = &mvmsta->tid_data[tid];
-			if (WARN(tid_data->state != IWL_AGG_ON &&
+			if (WARN(!iwl_mvm_is_dqa_supported(mvm) &&
+				 tid_data->state != IWL_AGG_ON &&
 				 tid_data->state != IWL_EMPTYING_HW_QUEUE_DELBA,
 				 "TID %d state is %d\n",
 				 tid, tid_data->state)) {
--- a/drivers/net/wireless/intel/iwlwifi/mvm/sta.h
+++ b/drivers/net/wireless/intel/iwlwifi/mvm/sta.h
@@ -545,7 +545,7 @@ void iwl_mvm_sta_modify_sleep_tx_count(s
 				       struct ieee80211_sta *sta,
 				       enum ieee80211_frame_release_type reason,
 				       u16 cnt, u16 tids, bool more_data,
-				       bool agg);
+				       bool single_sta_queue);
 int iwl_mvm_drain_sta(struct iwl_mvm *mvm, struct iwl_mvm_sta *mvmsta,
 		      bool drain);
 void iwl_mvm_sta_modify_disable_tx(struct iwl_mvm *mvm,
--- a/drivers/net/wireless/intel/iwlwifi/mvm/tx.c
+++ b/drivers/net/wireless/intel/iwlwifi/mvm/tx.c
@@ -7,7 +7,7 @@
  *
  * Copyright(c) 2012 - 2014 Intel Corporation. All rights reserved.
  * Copyright(c) 2013 - 2015 Intel Mobile Communications GmbH
- * Copyright(c) 2016        Intel Deutschland GmbH
+ * Copyright(c) 2016 - 2017 Intel Deutschland GmbH
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of version 2 of the GNU General Public License as
@@ -34,6 +34,7 @@
  *
  * Copyright(c) 2012 - 2014 Intel Corporation. All rights reserved.
  * Copyright(c) 2013 - 2015 Intel Mobile Communications GmbH
+ * Copyright(c) 2016 - 2017 Intel Deutschland GmbH
  * All rights reserved.
  *
  * Redistribution and use in source and binary forms, with or without
@@ -621,8 +622,10 @@ int iwl_mvm_tx_skb_non_sta(struct iwl_mv
 	 * values.
 	 * Note that we don't need to make sure it isn't agg'd, since we're
 	 * TXing non-sta
+	 * For DQA mode - we shouldn't increase it though
 	 */
-	atomic_inc(&mvm->pending_frames[sta_id]);
+	if (!iwl_mvm_is_dqa_supported(mvm))
+		atomic_inc(&mvm->pending_frames[sta_id]);
 
 	return 0;
 }
@@ -1009,11 +1012,8 @@ static int iwl_mvm_tx_mpdu(struct iwl_mv
 
 	spin_unlock(&mvmsta->lock);
 
-	/* Increase pending frames count if this isn't AMPDU */
-	if ((iwl_mvm_is_dqa_supported(mvm) &&
-	     mvmsta->tid_data[tx_cmd->tid_tspec].state != IWL_AGG_ON &&
-	     mvmsta->tid_data[tx_cmd->tid_tspec].state != IWL_AGG_STARTING) ||
-	    (!iwl_mvm_is_dqa_supported(mvm) && !is_ampdu))
+	/* Increase pending frames count if this isn't AMPDU or DQA queue */
+	if (!iwl_mvm_is_dqa_supported(mvm) && !is_ampdu)
 		atomic_inc(&mvm->pending_frames[mvmsta->sta_id]);
 
 	return 0;
@@ -1083,12 +1083,13 @@ static void iwl_mvm_check_ratid_empty(st
 	lockdep_assert_held(&mvmsta->lock);
 
 	if ((tid_data->state == IWL_AGG_ON ||
-	     tid_data->state == IWL_EMPTYING_HW_QUEUE_DELBA) &&
+	     tid_data->state == IWL_EMPTYING_HW_QUEUE_DELBA ||
+	     iwl_mvm_is_dqa_supported(mvm)) &&
 	    iwl_mvm_tid_queued(tid_data) == 0) {
 		/*
-		 * Now that this aggregation queue is empty tell mac80211 so it
-		 * knows we no longer have frames buffered for the station on
-		 * this TID (for the TIM bitmap calculation.)
+		 * Now that this aggregation or DQA queue is empty tell
+		 * mac80211 so it knows we no longer have frames buffered for
+		 * the station on this TID (for the TIM bitmap calculation.)
 		 */
 		ieee80211_sta_set_buffered(sta, tid, false);
 	}
@@ -1261,7 +1262,6 @@ static void iwl_mvm_rx_tx_cmd_single(str
 	u8 skb_freed = 0;
 	u16 next_reclaimed, seq_ctl;
 	bool is_ndp = false;
-	bool txq_agg = false; /* Is this TXQ aggregated */
 
 	__skb_queue_head_init(&skbs);
 
@@ -1287,6 +1287,10 @@ static void iwl_mvm_rx_tx_cmd_single(str
 			info->flags |= IEEE80211_TX_STAT_ACK;
 			break;
 		case TX_STATUS_FAIL_DEST_PS:
+			/* In DQA, the FW should have stopped the queue and not
+			 * return this status
+			 */
+			WARN_ON(iwl_mvm_is_dqa_supported(mvm));
 			info->flags |= IEEE80211_TX_STAT_TX_FILTERED;
 			break;
 		default:
@@ -1391,15 +1395,6 @@ static void iwl_mvm_rx_tx_cmd_single(str
 			bool send_eosp_ndp = false;
 
 			spin_lock_bh(&mvmsta->lock);
-			if (iwl_mvm_is_dqa_supported(mvm)) {
-				enum iwl_mvm_agg_state state;
-
-				state = mvmsta->tid_data[tid].state;
-				txq_agg = (state == IWL_AGG_ON ||
-					state == IWL_EMPTYING_HW_QUEUE_DELBA);
-			} else {
-				txq_agg = txq_id >= mvm->first_agg_queue;
-			}
 
 			if (!is_ndp) {
 				tid_data->next_reclaimed = next_reclaimed;
@@ -1456,11 +1451,11 @@ static void iwl_mvm_rx_tx_cmd_single(str
 	 * If the txq is not an AMPDU queue, there is no chance we freed
 	 * several skbs. Check that out...
 	 */
-	if (txq_agg)
+	if (iwl_mvm_is_dqa_supported(mvm) || txq_id >= mvm->first_agg_queue)
 		goto out;
 
 	/* We can't free more than one frame at once on a shared queue */
-	WARN_ON(!iwl_mvm_is_dqa_supported(mvm) && (skb_freed > 1));
+	WARN_ON(skb_freed > 1);
 
 	/* If we have still frames for this STA nothing to do here */
 	if (!atomic_sub_and_test(skb_freed, &mvm->pending_frames[sta_id]))


Patches currently in stable-queue which might be from sara.sharon@intel.com are

queue-4.9/iwlwifi-mvm-cleanup-pending-frames-in-dqa-mode.patch

                 reply	other threads:[~2017-12-18 13:22 UTC|newest]

Thread overview: [no followups] expand[flat|nested]  mbox.gz  Atom feed

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=15136032843913@kroah.com \
    --to=gregkh@linuxfoundation.org \
    --cc=alexander.levin@verizon.com \
    --cc=axboe@kernel.dk \
    --cc=kvalo@codeaurora.org \
    --cc=luciano.coelho@intel.com \
    --cc=sara.sharon@intel.com \
    --cc=stable-commits@vger.kernel.org \
    --cc=stable@vger.kernel.org \
    --cc=torvalds@linux-foundation.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.