From: <gregkh@linuxfoundation.org>
To: luto@kernel.org, akpm@linux-foundation.org, bpetkov@suse.de,
dave.hansen@intel.com, edubezval@gmail.com, eduval@amazon.com,
gregkh@linuxfoundation.org, keescook@chromium.org,
mgorman@suse.de, mhocko@suse.com, mingo@kernel.org,
nadav.amit@gmail.com, namit@vmware.com, peterz@infradead.org,
riel@redhat.com, tglx@linutronix.de,
torvalds@linux-foundation.org
Cc: <stable@vger.kernel.org>, <stable-commits@vger.kernel.org>
Subject: Patch "x86/mm: Reimplement flush_tlb_page() using flush_tlb_mm_range()" has been added to the 4.9-stable tree
Date: Thu, 21 Dec 2017 09:41:07 +0100 [thread overview]
Message-ID: <1513845667054@kroah.com> (raw)
This is a note to let you know that I've just added the patch titled
x86/mm: Reimplement flush_tlb_page() using flush_tlb_mm_range()
to the 4.9-stable tree which can be found at:
http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=summary
The filename of the patch is:
x86-mm-reimplement-flush_tlb_page-using-flush_tlb_mm_range.patch
and it can be found in the queue-4.9 subdirectory.
If you, or anyone else, feels it should not be added to the stable tree,
please let <stable@vger.kernel.org> know about it.
>From ca6c99c0794875c6d1db6e22f246699691ab7e6b Mon Sep 17 00:00:00 2001
From: Andy Lutomirski <luto@kernel.org>
Date: Mon, 22 May 2017 15:30:01 -0700
Subject: x86/mm: Reimplement flush_tlb_page() using flush_tlb_mm_range()
From: Andy Lutomirski <luto@kernel.org>
commit ca6c99c0794875c6d1db6e22f246699691ab7e6b upstream.
flush_tlb_page() was very similar to flush_tlb_mm_range() except that
it had a couple of issues:
- It was missing an smp_mb() in the case where
current->active_mm != mm. (This is a longstanding bug reported by Nadav Amit)
- It was missing tracepoints and vm counter updates.
The only reason that I can see for keeping it at as a separate
function is that it could avoid a few branches that
flush_tlb_mm_range() needs to decide to flush just one page. This
hardly seems worthwhile. If we decide we want to get rid of those
branches again, a better way would be to introduce an
__flush_tlb_mm_range() helper and make both flush_tlb_page() and
flush_tlb_mm_range() use it.
Signed-off-by: Andy Lutomirski <luto@kernel.org>
Acked-by: Kees Cook <keescook@chromium.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Borislav Petkov <bpetkov@suse.de>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Nadav Amit <nadav.amit@gmail.com>
Cc: Nadav Amit <namit@vmware.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rik van Riel <riel@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-mm@kvack.org
Link: http://lkml.kernel.org/r/3cc3847cf888d8907577569b8bac3f01992ef8f9.1495492063.git.luto@kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Eduardo Valentin <eduval@amazon.com>
Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
arch/x86/include/asm/tlbflush.h | 5 ++++-
arch/x86/mm/tlb.c | 27 ---------------------------
2 files changed, 4 insertions(+), 28 deletions(-)
--- a/arch/x86/include/asm/tlbflush.h
+++ b/arch/x86/include/asm/tlbflush.h
@@ -304,12 +304,15 @@ static inline void flush_tlb_kernel_rang
extern void flush_tlb_all(void);
extern void flush_tlb_current_task(void);
-extern void flush_tlb_page(struct vm_area_struct *, unsigned long);
extern void flush_tlb_mm_range(struct mm_struct *mm, unsigned long start,
unsigned long end, unsigned long vmflag);
extern void flush_tlb_kernel_range(unsigned long start, unsigned long end);
#define flush_tlb() flush_tlb_current_task()
+static inline void flush_tlb_page(struct vm_area_struct *vma, unsigned long a)
+{
+ flush_tlb_mm_range(vma->vm_mm, a, a + PAGE_SIZE, VM_NONE);
+}
void native_flush_tlb_others(const struct cpumask *cpumask,
struct mm_struct *mm,
--- a/arch/x86/mm/tlb.c
+++ b/arch/x86/mm/tlb.c
@@ -369,33 +369,6 @@ out:
preempt_enable();
}
-void flush_tlb_page(struct vm_area_struct *vma, unsigned long start)
-{
- struct mm_struct *mm = vma->vm_mm;
-
- preempt_disable();
-
- if (current->active_mm == mm) {
- if (current->mm) {
- /*
- * Implicit full barrier (INVLPG) that synchronizes
- * with switch_mm.
- */
- __flush_tlb_one(start);
- } else {
- leave_mm(smp_processor_id());
-
- /* Synchronize with switch_mm. */
- smp_mb();
- }
- }
-
- if (cpumask_any_but(mm_cpumask(mm), smp_processor_id()) < nr_cpu_ids)
- flush_tlb_others(mm_cpumask(mm), mm, start, start + PAGE_SIZE);
-
- preempt_enable();
-}
-
static void do_flush_tlb_all(void *info)
{
count_vm_tlb_event(NR_TLB_REMOTE_FLUSH_RECEIVED);
Patches currently in stable-queue which might be from luto@kernel.org are
queue-4.9/x86-mm-refactor-flush_tlb_mm_range-to-merge-local-and-remote-cases.patch
queue-4.9/x86-mm-pass-flush_tlb_info-to-flush_tlb_others-etc.patch
queue-4.9/x86-mm-rework-lazy-tlb-to-track-the-actual-loaded-mm.patch
queue-4.9/x86-mm-kvm-teach-kvm-s-vmx-code-that-cr3-isn-t-a-constant.patch
queue-4.9/x86-mm-use-new-merged-flush-logic-in-arch_tlbbatch_flush.patch
queue-4.9/x86-kvm-vmx-simplify-segment_base.patch
queue-4.9/x86-entry-unwind-create-stack-frames-for-saved-interrupt-registers.patch
queue-4.9/x86-mm-reduce-indentation-in-flush_tlb_func.patch
queue-4.9/x86-mm-remove-the-up-asm-tlbflush.h-code-always-use-the-formerly-smp-code.patch
queue-4.9/x86-mm-reimplement-flush_tlb_page-using-flush_tlb_mm_range.patch
queue-4.9/mm-x86-mm-make-the-batched-unmap-tlb-flush-api-more-generic.patch
queue-4.9/x86-kvm-vmx-defer-tr-reload-after-vm-exit.patch
queue-4.9/x86-mm-change-the-leave_mm-condition-for-local-tlb-flushes.patch
queue-4.9/x86-mm-be-more-consistent-wrt-page_shift-vs-page_size-in-tlb-flush-code.patch
next reply other threads:[~2017-12-21 8:45 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-12-21 8:41 gregkh [this message]
-- strict thread matches above, loose matches on Subject: below --
2017-12-30 16:38 Patch "x86/mm: Reimplement flush_tlb_page() using flush_tlb_mm_range()" has been added to the 4.9-stable tree gregkh
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1513845667054@kroah.com \
--to=gregkh@linuxfoundation.org \
--cc=akpm@linux-foundation.org \
--cc=bpetkov@suse.de \
--cc=dave.hansen@intel.com \
--cc=edubezval@gmail.com \
--cc=eduval@amazon.com \
--cc=keescook@chromium.org \
--cc=luto@kernel.org \
--cc=mgorman@suse.de \
--cc=mhocko@suse.com \
--cc=mingo@kernel.org \
--cc=nadav.amit@gmail.com \
--cc=namit@vmware.com \
--cc=peterz@infradead.org \
--cc=riel@redhat.com \
--cc=stable-commits@vger.kernel.org \
--cc=stable@vger.kernel.org \
--cc=tglx@linutronix.de \
--cc=torvalds@linux-foundation.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.