From: <gregkh@linuxfoundation.org>
To: jpoimboe@redhat.com, boris.ostrovsky@oracle.com,
gregkh@linuxfoundation.org, jgross@suse.com, jslaby@suse.cz,
luto@kernel.org, mingo@kernel.org, peterz@infradead.org,
tglx@linutronix.de, torvalds@linux-foundation.org
Cc: <stable@vger.kernel.org>, <stable-commits@vger.kernel.org>
Subject: Patch "x86/head: Add unwind hint annotations" has been added to the 4.14-stable tree
Date: Thu, 21 Dec 2017 15:39:31 +0100 [thread overview]
Message-ID: <1513867171180234@kroah.com> (raw)
This is a note to let you know that I've just added the patch titled
x86/head: Add unwind hint annotations
to the 4.14-stable tree which can be found at:
http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=summary
The filename of the patch is:
x86-head-add-unwind-hint-annotations.patch
and it can be found in the queue-4.14 subdirectory.
If you, or anyone else, feels it should not be added to the stable tree,
please let <stable@vger.kernel.org> know about it.
>From 2704fbb672d0d9a19414907fda7949283dcef6a1 Mon Sep 17 00:00:00 2001
From: Josh Poimboeuf <jpoimboe@redhat.com>
Date: Mon, 18 Sep 2017 21:43:37 -0500
Subject: x86/head: Add unwind hint annotations
From: Josh Poimboeuf <jpoimboe@redhat.com>
commit 2704fbb672d0d9a19414907fda7949283dcef6a1 upstream.
Jiri Slaby reported an ORC issue when unwinding from an idle task. The
stack was:
ffffffff811083c2 do_idle+0x142/0x1e0
ffffffff8110861d cpu_startup_entry+0x5d/0x60
ffffffff82715f58 start_kernel+0x3ff/0x407
ffffffff827153e8 x86_64_start_kernel+0x14e/0x15d
ffffffff810001bf secondary_startup_64+0x9f/0xa0
The ORC unwinder errored out at secondary_startup_64 because the head
code isn't annotated yet so there wasn't a corresponding ORC entry.
Fix that and any other head-related unwinding issues by adding unwind
hints to the head code.
Reported-by: Jiri Slaby <jslaby@suse.cz>
Tested-by: Jiri Slaby <jslaby@suse.cz>
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/78ef000a2f68f545d6eef44ee912edceaad82ccf.1505764066.git.jpoimboe@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
arch/x86/kernel/Makefile | 1 -
arch/x86/kernel/head_64.S | 14 ++++++++++++--
2 files changed, 12 insertions(+), 3 deletions(-)
--- a/arch/x86/kernel/Makefile
+++ b/arch/x86/kernel/Makefile
@@ -27,7 +27,6 @@ KASAN_SANITIZE_dumpstack.o := n
KASAN_SANITIZE_dumpstack_$(BITS).o := n
KASAN_SANITIZE_stacktrace.o := n
-OBJECT_FILES_NON_STANDARD_head_$(BITS).o := y
OBJECT_FILES_NON_STANDARD_relocate_kernel_$(BITS).o := y
OBJECT_FILES_NON_STANDARD_ftrace_$(BITS).o := y
OBJECT_FILES_NON_STANDARD_test_nx.o := y
--- a/arch/x86/kernel/head_64.S
+++ b/arch/x86/kernel/head_64.S
@@ -50,6 +50,7 @@ L3_START_KERNEL = pud_index(__START_KERN
.code64
.globl startup_64
startup_64:
+ UNWIND_HINT_EMPTY
/*
* At this point the CPU runs in 64bit mode CS.L = 1 CS.D = 0,
* and someone has loaded an identity mapped page table
@@ -89,6 +90,7 @@ startup_64:
addq $(early_top_pgt - __START_KERNEL_map), %rax
jmp 1f
ENTRY(secondary_startup_64)
+ UNWIND_HINT_EMPTY
/*
* At this point the CPU runs in 64bit mode CS.L = 1 CS.D = 0,
* and someone has loaded a mapped page table.
@@ -133,6 +135,7 @@ ENTRY(secondary_startup_64)
movq $1f, %rax
jmp *%rax
1:
+ UNWIND_HINT_EMPTY
/* Check if nx is implemented */
movl $0x80000001, %eax
@@ -247,6 +250,7 @@ END(secondary_startup_64)
*/
ENTRY(start_cpu0)
movq initial_stack(%rip), %rsp
+ UNWIND_HINT_EMPTY
jmp .Ljump_to_C_code
ENDPROC(start_cpu0)
#endif
@@ -271,13 +275,18 @@ ENTRY(early_idt_handler_array)
i = 0
.rept NUM_EXCEPTION_VECTORS
.ifeq (EXCEPTION_ERRCODE_MASK >> i) & 1
- pushq $0 # Dummy error code, to make stack frame uniform
+ UNWIND_HINT_IRET_REGS
+ pushq $0 # Dummy error code, to make stack frame uniform
+ .else
+ UNWIND_HINT_IRET_REGS offset=8
.endif
pushq $i # 72(%rsp) Vector number
jmp early_idt_handler_common
+ UNWIND_HINT_IRET_REGS
i = i + 1
.fill early_idt_handler_array + i*EARLY_IDT_HANDLER_SIZE - ., 1, 0xcc
.endr
+ UNWIND_HINT_IRET_REGS offset=16
END(early_idt_handler_array)
early_idt_handler_common:
@@ -306,6 +315,7 @@ early_idt_handler_common:
pushq %r13 /* pt_regs->r13 */
pushq %r14 /* pt_regs->r14 */
pushq %r15 /* pt_regs->r15 */
+ UNWIND_HINT_REGS
cmpq $14,%rsi /* Page fault? */
jnz 10f
@@ -428,7 +438,7 @@ ENTRY(phys_base)
EXPORT_SYMBOL(phys_base)
#include "../../x86/xen/xen-head.S"
-
+
__PAGE_ALIGNED_BSS
NEXT_PAGE(empty_zero_page)
.skip PAGE_SIZE
Patches currently in stable-queue which might be from jpoimboe@redhat.com are
queue-4.14/x86-asm-don-t-use-the-confusing-.ifeq-directive.patch
queue-4.14/x86-boot-relocate-definition-of-the-initial-state-of-cr0.patch
queue-4.14/objtool-don-t-report-end-of-section-error-after-an-empty-unwind-hint.patch
queue-4.14/x86-xen-fix-xen-head-elf-annotations.patch
queue-4.14/x86-head-fix-head-elf-function-annotations.patch
queue-4.14/objtool-print-top-level-commands-on-incorrect-usage.patch
queue-4.14/x86-unwind-rename-unwinder-config-options-to-config_unwinder_.patch
queue-4.14/x86-head-add-unwind-hint-annotations.patch
queue-4.14/x86-head-remove-unused-bad_address-code.patch
queue-4.14/x86-xen-add-unwind-hint-annotations.patch
queue-4.14/x86-head-remove-confusing-comment.patch
queue-4.14/x86-unwinder-make-config_unwinder_orc-y-the-default-in-the-64-bit-defconfig.patch
queue-4.14/x86-unwind-make-config_unwinder_orc-y-the-default-in-kconfig-for-64-bit.patch
queue-4.14/x86-mm-relocate-page-fault-error-codes-to-traps.h.patch
queue-4.14/x86-boot-annotate-verify_cpu-as-a-callable-function.patch
reply other threads:[~2017-12-21 14:40 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1513867171180234@kroah.com \
--to=gregkh@linuxfoundation.org \
--cc=boris.ostrovsky@oracle.com \
--cc=jgross@suse.com \
--cc=jpoimboe@redhat.com \
--cc=jslaby@suse.cz \
--cc=luto@kernel.org \
--cc=mingo@kernel.org \
--cc=peterz@infradead.org \
--cc=stable-commits@vger.kernel.org \
--cc=stable@vger.kernel.org \
--cc=tglx@linutronix.de \
--cc=torvalds@linux-foundation.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.