All of lore.kernel.org
 help / color / mirror / Atom feed
From: <gregkh@linuxfoundation.org>
To: hughd@google.com, gregkh@linuxfoundation.org, jkosina@suse.cz
Cc: <stable@vger.kernel.org>, <stable-commits@vger.kernel.org>
Subject: Patch "kaiser: fix regs to do_nmi() ifndef CONFIG_KAISER" has been added to the 4.4-stable tree
Date: Wed, 03 Jan 2018 19:03:41 +0100	[thread overview]
Message-ID: <1515002621916@kroah.com> (raw)


This is a note to let you know that I've just added the patch titled

    kaiser: fix regs to do_nmi() ifndef CONFIG_KAISER

to the 4.4-stable tree which can be found at:
    http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=summary

The filename of the patch is:
     kaiser-fix-regs-to-do_nmi-ifndef-config_kaiser.patch
and it can be found in the queue-4.4 subdirectory.

If you, or anyone else, feels it should not be added to the stable tree,
please let <stable@vger.kernel.org> know about it.


>From foo@baz Wed Jan  3 18:58:12 CET 2018
From: Hugh Dickins <hughd@google.com>
Date: Thu, 21 Sep 2017 20:39:56 -0700
Subject: kaiser: fix regs to do_nmi() ifndef CONFIG_KAISER

From: Hugh Dickins <hughd@google.com>


pjt has observed that nmi's second (nmi_from_kernel) call to do_nmi()
adjusted the %rdi regs arg, rightly when CONFIG_KAISER, but wrongly
when not CONFIG_KAISER.

Although the minimal change is to add an #ifdef CONFIG_KAISER around
the addq line, that looks cluttered, and I prefer how the first call
to do_nmi() handled it: prepare args in %rdi and %rsi before getting
into the CONFIG_KAISER block, since it does not touch them at all.

And while we're here, place the "#ifdef CONFIG_KAISER" that follows
each, to enclose the "Unconditionally restore CR3" comment: matching
how the "Unconditionally use kernel CR3" comment above is enclosed.

Signed-off-by: Hugh Dickins <hughd@google.com>
Acked-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 arch/x86/entry/entry_64.S |   11 ++++++-----
 1 file changed, 6 insertions(+), 5 deletions(-)

--- a/arch/x86/entry/entry_64.S
+++ b/arch/x86/entry/entry_64.S
@@ -1297,12 +1297,13 @@ ENTRY(nmi)
 	movq	%rax, %cr3
 #endif
 	call	do_nmi
+
+#ifdef CONFIG_KAISER
 	/*
 	 * Unconditionally restore CR3.  I know we return to
 	 * kernel code that needs user CR3, but do we ever return
 	 * to "user mode" where we need the kernel CR3?
 	 */
-#ifdef CONFIG_KAISER
 	popq	%rax
 	mov	%rax, %cr3
 #endif
@@ -1526,6 +1527,8 @@ end_repeat_nmi:
 	SWAPGS
 	xorl	%ebx, %ebx
 1:
+	movq	%rsp, %rdi
+	movq	$-1, %rsi
 #ifdef CONFIG_KAISER
 	/* Unconditionally use kernel CR3 for do_nmi() */
 	/* %rax is saved above, so OK to clobber here */
@@ -1538,16 +1541,14 @@ end_repeat_nmi:
 #endif
 
 	/* paranoidentry do_nmi, 0; without TRACE_IRQS_OFF */
-	movq	%rsp, %rdi
-	addq	$8, %rdi /* point %rdi at ptregs, fixed up for CR3 */
-	movq	$-1, %rsi
 	call	do_nmi
+
+#ifdef CONFIG_KAISER
 	/*
 	 * Unconditionally restore CR3.  We might be returning to
 	 * kernel code that needs user CR3, like just just before
 	 * a sysret.
 	 */
-#ifdef CONFIG_KAISER
 	popq	%rax
 	mov	%rax, %cr3
 #endif


Patches currently in stable-queue which might be from hughd@google.com are

queue-4.4/kaiser-vmstat-show-nr_kaisertable-as-nr_overhead.patch
queue-4.4/kaiser-add-nokaiser-boot-option-using-alternative.patch
queue-4.4/kaiser-fix-unlikely-error-in-alloc_ldt_struct.patch
queue-4.4/kaiser-_pgd_alloc-without-__gfp_repeat-to-avoid-stalls.patch
queue-4.4/kaiser-kaiser_flush_tlb_on_return_to_user-check-pcid.patch
queue-4.4/x86-paravirt-dont-patch-flush_tlb_single.patch
queue-4.4/kaiser-merged-update.patch
queue-4.4/kaiser-delete-kaiser_real_switch-option.patch
queue-4.4/kaiser-kaiser_remove_mapping-move-along-the-pgd.patch
queue-4.4/kaiser-fix-perf-crashes.patch
queue-4.4/kaiser-drop-is_atomic-arg-to-kaiser_pagetable_walk.patch
queue-4.4/kaiser-load_new_mm_cr3-let-switch_user_cr3-flush-user.patch
queue-4.4/kaiser-enhanced-by-kernel-and-user-pcids.patch
queue-4.4/kaiser-x86_cr3_pcid_noflush-and-x86_cr3_pcid_user.patch
queue-4.4/kaiser-use-alternative-instead-of-x86_cr3_pcid_noflush.patch
queue-4.4/kaiser-stack-map-page_size-at-thread_size-page_size.patch
queue-4.4/kaiser-name-that-0x1000-kaiser_shadow_pgd_offset.patch
queue-4.4/kaiser-fix-regs-to-do_nmi-ifndef-config_kaiser.patch
queue-4.4/kaiser-do-not-set-_page_nx-on-pgd_none.patch
queue-4.4/kaiser-tidied-up-asm-kaiser.h-somewhat.patch
queue-4.4/kaiser-cleanups-while-trying-for-gold-link.patch
queue-4.4/kaiser-tidied-up-kaiser_add-remove_mapping-slightly.patch
queue-4.4/kaiser-fix-build-and-fixme-in-alloc_ldt_struct.patch
queue-4.4/kaiser-kernel-address-isolation.patch
queue-4.4/kaiser-enomem-if-kaiser_pagetable_walk-null.patch
queue-4.4/kaiser-asm-tlbflush.h-handle-nopge-at-lower-level.patch
queue-4.4/kaiser-paranoid_entry-pass-cr3-need-to-paranoid_exit.patch
queue-4.4/kaiser-kaiser-depends-on-smp.patch
queue-4.4/kaiser-pcid-0-for-kernel-and-128-for-user.patch

                 reply	other threads:[~2018-01-03 18:04 UTC|newest]

Thread overview: [no followups] expand[flat|nested]  mbox.gz  Atom feed

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1515002621916@kroah.com \
    --to=gregkh@linuxfoundation.org \
    --cc=hughd@google.com \
    --cc=jkosina@suse.cz \
    --cc=stable-commits@vger.kernel.org \
    --cc=stable@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.