All of lore.kernel.org
 help / color / mirror / Atom feed
From: <gregkh@linuxfoundation.org>
To: hughd@google.com, gregkh@linuxfoundation.org
Cc: <stable@vger.kernel.org>, <stable-commits@vger.kernel.org>
Subject: Patch "kaiser: delete KAISER_REAL_SWITCH option" has been added to the 4.9-stable tree
Date: Wed, 03 Jan 2018 20:40:08 +0100	[thread overview]
Message-ID: <1515008408230153@kroah.com> (raw)


This is a note to let you know that I've just added the patch titled

    kaiser: delete KAISER_REAL_SWITCH option

to the 4.9-stable tree which can be found at:
    http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=summary

The filename of the patch is:
     kaiser-delete-kaiser_real_switch-option.patch
and it can be found in the queue-4.9 subdirectory.

If you, or anyone else, feels it should not be added to the stable tree,
please let <stable@vger.kernel.org> know about it.


>From foo@baz Wed Jan  3 20:37:21 CET 2018
From: Hugh Dickins <hughd@google.com>
Date: Sun, 3 Sep 2017 18:30:43 -0700
Subject: kaiser: delete KAISER_REAL_SWITCH option

From: Hugh Dickins <hughd@google.com>


We fail to see what CONFIG_KAISER_REAL_SWITCH is for: it seems to be
left over from early development, and now just obscures tricky parts
of the code.  Delete it before adding PCIDs, or nokaiser boot option.

(Or if there is some good reason to keep the option, then it needs
a help text - and a "depends on KAISER", so that all those without
KAISER are not asked the question.  But we'd much rather delete it.)

Signed-off-by: Hugh Dickins <hughd@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 arch/x86/entry/entry_64.S     |    4 ----
 arch/x86/include/asm/kaiser.h |    4 ----
 security/Kconfig              |    4 ----
 3 files changed, 12 deletions(-)

--- a/arch/x86/entry/entry_64.S
+++ b/arch/x86/entry/entry_64.S
@@ -1317,9 +1317,7 @@ ENTRY(nmi)
 	/* %rax is saved above, so OK to clobber here */
 	movq	%cr3, %rax
 	pushq	%rax
-#ifdef CONFIG_KAISER_REAL_SWITCH
 	andq	$(~KAISER_SHADOW_PGD_OFFSET), %rax
-#endif
 	movq	%rax, %cr3
 #endif
 	call	do_nmi
@@ -1560,9 +1558,7 @@ end_repeat_nmi:
 	/* %rax is saved above, so OK to clobber here */
 	movq	%cr3, %rax
 	pushq	%rax
-#ifdef CONFIG_KAISER_REAL_SWITCH
 	andq	$(~KAISER_SHADOW_PGD_OFFSET), %rax
-#endif
 	movq	%rax, %cr3
 #endif
 
--- a/arch/x86/include/asm/kaiser.h
+++ b/arch/x86/include/asm/kaiser.h
@@ -21,17 +21,13 @@
 
 .macro _SWITCH_TO_KERNEL_CR3 reg
 movq %cr3, \reg
-#ifdef CONFIG_KAISER_REAL_SWITCH
 andq $(~KAISER_SHADOW_PGD_OFFSET), \reg
-#endif
 movq \reg, %cr3
 .endm
 
 .macro _SWITCH_TO_USER_CR3 reg
 movq %cr3, \reg
-#ifdef CONFIG_KAISER_REAL_SWITCH
 orq $(KAISER_SHADOW_PGD_OFFSET), \reg
-#endif
 movq \reg, %cr3
 .endm
 
--- a/security/Kconfig
+++ b/security/Kconfig
@@ -41,10 +41,6 @@ config KAISER
 
 	  If you are unsure how to answer this question, answer Y.
 
-config KAISER_REAL_SWITCH
-	bool "KAISER: actually switch page tables"
-	default y
-
 config SECURITYFS
 	bool "Enable the securityfs filesystem"
 	help


Patches currently in stable-queue which might be from hughd@google.com are

queue-4.9/kaiser-vmstat-show-nr_kaisertable-as-nr_overhead.patch
queue-4.9/kaiser-add-nokaiser-boot-option-using-alternative.patch
queue-4.9/kaiser-fix-unlikely-error-in-alloc_ldt_struct.patch
queue-4.9/kaiser-kaiser_flush_tlb_on_return_to_user-check-pcid.patch
queue-4.9/x86-paravirt-dont-patch-flush_tlb_single.patch
queue-4.9/kaiser-merged-update.patch
queue-4.9/kaiser-delete-kaiser_real_switch-option.patch
queue-4.9/kaiser-kaiser_remove_mapping-move-along-the-pgd.patch
queue-4.9/kaiser-fix-perf-crashes.patch
queue-4.9/kaiser-drop-is_atomic-arg-to-kaiser_pagetable_walk.patch
queue-4.9/kaiser-load_new_mm_cr3-let-switch_user_cr3-flush-user.patch
queue-4.9/kaiser-enhanced-by-kernel-and-user-pcids.patch
queue-4.9/kaiser-x86_cr3_pcid_noflush-and-x86_cr3_pcid_user.patch
queue-4.9/kaiser-align-addition-to-x86-mm-makefile.patch
queue-4.9/kaiser-use-alternative-instead-of-x86_cr3_pcid_noflush.patch
queue-4.9/kaiser-stack-map-page_size-at-thread_size-page_size.patch
queue-4.9/kaiser-name-that-0x1000-kaiser_shadow_pgd_offset.patch
queue-4.9/kaiser-fix-regs-to-do_nmi-ifndef-config_kaiser.patch
queue-4.9/kaiser-do-not-set-_page_nx-on-pgd_none.patch
queue-4.9/kaiser-tidied-up-asm-kaiser.h-somewhat.patch
queue-4.9/kaiser-cleanups-while-trying-for-gold-link.patch
queue-4.9/kaiser-tidied-up-kaiser_add-remove_mapping-slightly.patch
queue-4.9/kaiser-fix-build-and-fixme-in-alloc_ldt_struct.patch
queue-4.9/kaiser-kernel-address-isolation.patch
queue-4.9/kaiser-enomem-if-kaiser_pagetable_walk-null.patch
queue-4.9/kaiser-asm-tlbflush.h-handle-nopge-at-lower-level.patch
queue-4.9/kaiser-paranoid_entry-pass-cr3-need-to-paranoid_exit.patch
queue-4.9/kaiser-kaiser-depends-on-smp.patch
queue-4.9/kaiser-pcid-0-for-kernel-and-128-for-user.patch

                 reply	other threads:[~2018-01-03 19:40 UTC|newest]

Thread overview: [no followups] expand[flat|nested]  mbox.gz  Atom feed

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1515008408230153@kroah.com \
    --to=gregkh@linuxfoundation.org \
    --cc=hughd@google.com \
    --cc=stable-commits@vger.kernel.org \
    --cc=stable@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.