From: <gregkh@linuxfoundation.org>
To: aryabinin@virtuozzo.com, gregkh@linuxfoundation.org,
kubakici@wp.pl, luto@kernel.org, tglx@linutronix.de,
thgarnie@google.com
Cc: <stable@vger.kernel.org>, <stable-commits@vger.kernel.org>
Subject: Patch "x86/mm: Set MODULES_END to 0xffffffffff000000" has been added to the 4.14-stable tree
Date: Fri, 05 Jan 2018 23:06:47 +0100 [thread overview]
Message-ID: <151519000716474@kroah.com> (raw)
This is a note to let you know that I've just added the patch titled
x86/mm: Set MODULES_END to 0xffffffffff000000
to the 4.14-stable tree which can be found at:
http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=summary
The filename of the patch is:
x86-mm-set-modules_end-to-0xffffffffff000000.patch
and it can be found in the queue-4.14 subdirectory.
If you, or anyone else, feels it should not be added to the stable tree,
please let <stable@vger.kernel.org> know about it.
>From f5a40711fa58f1c109165a4fec6078bf2dfd2bdc Mon Sep 17 00:00:00 2001
From: Andrey Ryabinin <aryabinin@virtuozzo.com>
Date: Thu, 28 Dec 2017 19:06:20 +0300
Subject: x86/mm: Set MODULES_END to 0xffffffffff000000
From: Andrey Ryabinin <aryabinin@virtuozzo.com>
commit f5a40711fa58f1c109165a4fec6078bf2dfd2bdc upstream.
Since f06bdd4001c2 ("x86/mm: Adapt MODULES_END based on fixmap section size")
kasan_mem_to_shadow(MODULES_END) could be not aligned to a page boundary.
So passing page unaligned address to kasan_populate_zero_shadow() have two
possible effects:
1) It may leave one page hole in supposed to be populated area. After commit
21506525fb8d ("x86/kasan/64: Teach KASAN about the cpu_entry_area") that
hole happens to be in the shadow covering fixmap area and leads to crash:
BUG: unable to handle kernel paging request at fffffbffffe8ee04
RIP: 0010:check_memory_region+0x5c/0x190
Call Trace:
<NMI>
memcpy+0x1f/0x50
ghes_copy_tofrom_phys+0xab/0x180
ghes_read_estatus+0xfb/0x280
ghes_notify_nmi+0x2b2/0x410
nmi_handle+0x115/0x2c0
default_do_nmi+0x57/0x110
do_nmi+0xf8/0x150
end_repeat_nmi+0x1a/0x1e
Note, the crash likely disappeared after commit 92a0f81d8957, which
changed kasan_populate_zero_shadow() call the way it was before
commit 21506525fb8d.
2) Attempt to load module near MODULES_END will fail, because
__vmalloc_node_range() called from kasan_module_alloc() will hit the
WARN_ON(!pte_none(*pte)) in the vmap_pte_range() and bail out with error.
To fix this we need to make kasan_mem_to_shadow(MODULES_END) page aligned
which means that MODULES_END should be 8*PAGE_SIZE aligned.
The whole point of commit f06bdd4001c2 was to move MODULES_END down if
NR_CPUS is big, so the cpu_entry_area takes a lot of space.
But since 92a0f81d8957 ("x86/cpu_entry_area: Move it out of the fixmap")
the cpu_entry_area is no longer in fixmap, so we could just set
MODULES_END to a fixed 8*PAGE_SIZE aligned address.
Fixes: f06bdd4001c2 ("x86/mm: Adapt MODULES_END based on fixmap section size")
Reported-by: Jakub Kicinski <kubakici@wp.pl>
Signed-off-by: Andrey Ryabinin <aryabinin@virtuozzo.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Thomas Garnier <thgarnie@google.com>
Link: https://lkml.kernel.org/r/20171228160620.23818-1-aryabinin@virtuozzo.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
Documentation/x86/x86_64/mm.txt | 5 +----
arch/x86/include/asm/pgtable_64_types.h | 2 +-
2 files changed, 2 insertions(+), 5 deletions(-)
--- a/Documentation/x86/x86_64/mm.txt
+++ b/Documentation/x86/x86_64/mm.txt
@@ -43,7 +43,7 @@ ffffff0000000000 - ffffff7fffffffff (=39
ffffffef00000000 - fffffffeffffffff (=64 GB) EFI region mapping space
... unused hole ...
ffffffff80000000 - ffffffff9fffffff (=512 MB) kernel text mapping, from phys 0
-ffffffffa0000000 - [fixmap start] (~1526 MB) module mapping space
+ffffffffa0000000 - fffffffffeffffff (1520 MB) module mapping space
[fixmap start] - ffffffffff5fffff kernel-internal fixmap range
ffffffffff600000 - ffffffffff600fff (=4 kB) legacy vsyscall ABI
ffffffffffe00000 - ffffffffffffffff (=2 MB) unused hole
@@ -67,9 +67,6 @@ memory window (this size is arbitrary, i
The mappings are not part of any other kernel PGD and are only available
during EFI runtime calls.
-The module mapping space size changes based on the CONFIG requirements for the
-following fixmap section.
-
Note that if CONFIG_RANDOMIZE_MEMORY is enabled, the direct mapping of all
physical memory, vmalloc/ioremap space and virtual memory map are randomized.
Their order is preserved but their base will be offset early at boot time.
--- a/arch/x86/include/asm/pgtable_64_types.h
+++ b/arch/x86/include/asm/pgtable_64_types.h
@@ -104,7 +104,7 @@ typedef struct { pteval_t pte; } pte_t;
#define MODULES_VADDR (__START_KERNEL_map + KERNEL_IMAGE_SIZE)
/* The module sections ends with the start of the fixmap */
-#define MODULES_END __fix_to_virt(__end_of_fixed_addresses + 1)
+#define MODULES_END _AC(0xffffffffff000000, UL)
#define MODULES_LEN (MODULES_END - MODULES_VADDR)
#define ESPFIX_PGD_ENTRY _AC(-2, UL)
Patches currently in stable-queue which might be from aryabinin@virtuozzo.com are
queue-4.14/x86-mm-set-modules_end-to-0xffffffffff000000.patch
reply other threads:[~2018-01-05 22:07 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=151519000716474@kroah.com \
--to=gregkh@linuxfoundation.org \
--cc=aryabinin@virtuozzo.com \
--cc=kubakici@wp.pl \
--cc=luto@kernel.org \
--cc=stable-commits@vger.kernel.org \
--cc=stable@vger.kernel.org \
--cc=tglx@linutronix.de \
--cc=thgarnie@google.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.