All of lore.kernel.org
 help / color / mirror / Atom feed
From: Joe Perches <joe@perches.com>
To: Johannes Thumshirn <jthumshirn@suse.de>, Jens Axboe <axboe@fb.com>
Cc: Linux Block Layer Mailinglist <linux-block@vger.kernel.org>,
	Linux Kernel Mailinglist <linux-kernel@vger.kernel.org>
Subject: Re: [PATCH TRIVIAL] bsg: use pr_debug instead of hand crafted macros
Date: Mon, 22 Jan 2018 12:23:49 -0800	[thread overview]
Message-ID: <1516652629.8378.14.camel@perches.com> (raw)
In-Reply-To: <20180122075348.6974-1-jthumshirn@suse.de>

On Mon, 2018-01-22 at 08:53 +0100, Johannes Thumshirn wrote:
> Use pr_debug instead of hand crafted macros. This way it is not needed to
> re-compile the kernel to enable bsg debug outputs and it's possible to
> selectively enable specific prints.

Perhaps better to use

#define bsg_dbg(bd, fmt, ...) \
	pr_debug(bd->name, fmt, ##__VA_ARGS__)

> Signed-off-by: Johannes Thumshirn <jthumshirn@suse.de>
> ---
>  block/bsg.c | 35 +++++++++++++----------------------
>  1 file changed, 13 insertions(+), 22 deletions(-)
> 
> diff --git a/block/bsg.c b/block/bsg.c
> index 452f94f1c5d4..508e73c60add 100644
> --- a/block/bsg.c
> +++ b/block/bsg.c
> @@ -55,14 +55,6 @@ enum {
>  #define BSG_DEFAULT_CMDS	64
>  #define BSG_MAX_DEVS		32768
>  
> -#undef BSG_DEBUG
> -
> -#ifdef BSG_DEBUG
> -#define dprintk(fmt, args...) printk(KERN_ERR "%s: " fmt, __func__, ##args)
> -#else
> -#define dprintk(fmt, args...)
> -#endif
> -
>  static DEFINE_MUTEX(bsg_mutex);
>  static DEFINE_IDR(bsg_minor_idr);
>  
> @@ -123,7 +115,7 @@ static struct bsg_command *bsg_alloc_command(struct bsg_device *bd)
>  
>  	bc->bd = bd;
>  	INIT_LIST_HEAD(&bc->list);
> -	dprintk("%s: returning free cmd %p\n", bd->name, bc);
> +	pr_debug("%s: returning free cmd %p\n", bd->name, bc);
>  	return bc;
>  out:
>  	spin_unlock_irq(&bd->lock);
> @@ -222,7 +214,8 @@ bsg_map_hdr(struct bsg_device *bd, struct sg_io_v4 *hdr, fmode_t mode)
>  	if (!bcd->class_dev)
>  		return ERR_PTR(-ENXIO);
>  
> -	dprintk("map hdr %llx/%u %llx/%u\n", (unsigned long long) hdr->dout_xferp,
> +	pr_debug("map hdr %llx/%u %llx/%u\n",
> +		 (unsigned long long) hdr->dout_xferp,
>  		hdr->dout_xfer_len, (unsigned long long) hdr->din_xferp,
>  		hdr->din_xfer_len);
>  
> @@ -299,7 +292,7 @@ static void bsg_rq_end_io(struct request *rq, blk_status_t status)
>  	struct bsg_device *bd = bc->bd;
>  	unsigned long flags;
>  
> -	dprintk("%s: finished rq %p bc %p, bio %p\n",
> +	pr_debug("%s: finished rq %p bc %p, bio %p\n",
>  		bd->name, rq, bc, bc->bio);
>  
>  	bc->hdr.duration = jiffies_to_msecs(jiffies - bc->hdr.duration);
> @@ -333,7 +326,7 @@ static void bsg_add_command(struct bsg_device *bd, struct request_queue *q,
>  	list_add_tail(&bc->list, &bd->busy_list);
>  	spin_unlock_irq(&bd->lock);
>  
> -	dprintk("%s: queueing rq %p, bc %p\n", bd->name, rq, bc);
> +	pr_debug("%s: queueing rq %p, bc %p\n", bd->name, rq, bc);
>  
>  	rq->end_io_data = bc;
>  	blk_execute_rq_nowait(q, NULL, rq, at_head, bsg_rq_end_io);
> @@ -379,7 +372,7 @@ static struct bsg_command *bsg_get_done_cmd(struct bsg_device *bd)
>  		}
>  	} while (1);
>  
> -	dprintk("%s: returning done %p\n", bd->name, bc);
> +	pr_debug("%s: returning done %p\n", bd->name, bc);
>  
>  	return bc;
>  }
> @@ -390,7 +383,7 @@ static int blk_complete_sgv4_hdr_rq(struct request *rq, struct sg_io_v4 *hdr,
>  	struct scsi_request *req = scsi_req(rq);
>  	int ret = 0;
>  
> -	dprintk("rq %p bio %p 0x%x\n", rq, bio, req->result);
> +	pr_debug("rq %p bio %p 0x%x\n", rq, bio, req->result);
>  	/*
>  	 * fill in all the output members
>  	 */
> @@ -469,7 +462,7 @@ static int bsg_complete_all_commands(struct bsg_device *bd)
>  	struct bsg_command *bc;
>  	int ret, tret;
>  
> -	dprintk("%s: entered\n", bd->name);
> +	pr_debug("%s: entered\n", bd->name);

function tracing and this should be removed.

>  
>  	/*
>  	 * wait for all commands to complete
> @@ -572,7 +565,7 @@ bsg_read(struct file *file, char __user *buf, size_t count, loff_t *ppos)
>  	int ret;
>  	ssize_t bytes_read;
>  
> -	dprintk("%s: read %zd bytes\n", bd->name, count);
> +	pr_debug("%s: read %zd bytes\n", bd->name, count);
>  
>  	bsg_set_block(bd, file);
>  
> @@ -646,7 +639,7 @@ bsg_write(struct file *file, const char __user *buf, size_t count, loff_t *ppos)
>  	ssize_t bytes_written;
>  	int ret;
>  
> -	dprintk("%s: write %zd bytes\n", bd->name, count);
> +	pr_debug("%s: write %zd bytes\n", bd->name, count);
>  
>  	if (unlikely(uaccess_kernel()))
>  		return -EINVAL;
> @@ -664,7 +657,7 @@ bsg_write(struct file *file, const char __user *buf, size_t count, loff_t *ppos)
>  	if (!bytes_written || err_block_err(ret))
>  		bytes_written = ret;
>  
> -	dprintk("%s: returning %zd\n", bd->name, bytes_written);
> +	pr_debug("%s: returning %zd\n", bd->name, bytes_written);
>  	return bytes_written;
>  }
>  
> @@ -717,7 +710,7 @@ static int bsg_put_device(struct bsg_device *bd)
>  	hlist_del(&bd->dev_list);
>  	mutex_unlock(&bsg_mutex);
>  
> -	dprintk("%s: tearing down\n", bd->name);
> +	pr_debug("%s: tearing down\n", bd->name);
>  
>  	/*
>  	 * close can always block
> @@ -744,9 +737,7 @@ static struct bsg_device *bsg_add_device(struct inode *inode,
>  					 struct file *file)
>  {
>  	struct bsg_device *bd;
> -#ifdef BSG_DEBUG
>  	unsigned char buf[32];
> -#endif
>  
>  	if (!blk_queue_scsi_passthrough(rq)) {
>  		WARN_ONCE(true, "Attempt to register a non-SCSI queue\n");
> @@ -771,7 +762,7 @@ static struct bsg_device *bsg_add_device(struct inode *inode,
>  	hlist_add_head(&bd->dev_list, bsg_dev_idx_hash(iminor(inode)));
>  
>  	strncpy(bd->name, dev_name(rq->bsg_dev.class_dev), sizeof(bd->name) - 1);
> -	dprintk("bound to <%s>, max queue %d\n",
> +	pr_debug("bound to <%s>, max queue %d\n",
>  		format_dev_t(buf, inode->i_rdev), bd->max_queue);
>  
>  	mutex_unlock(&bsg_mutex);

  parent reply	other threads:[~2018-01-22 20:30 UTC|newest]

Thread overview: 6+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-01-22  7:53 [PATCH TRIVIAL] bsg: use pr_debug instead of hand crafted macros Johannes Thumshirn
2018-01-22 16:33 ` Bart Van Assche
2018-01-22 20:23 ` Joe Perches [this message]
2018-01-22 20:42   ` Bart Van Assche
2018-01-22 20:42     ` Bart Van Assche
2018-01-22 21:04     ` Joe Perches

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1516652629.8378.14.camel@perches.com \
    --to=joe@perches.com \
    --cc=axboe@fb.com \
    --cc=jthumshirn@suse.de \
    --cc=linux-block@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.