All of lore.kernel.org
 help / color / mirror / Atom feed
From: <twischer@de.adit-jv.com>
To: patch@alsa-project.org
Cc: Timo Wischer <twischer@de.adit-jv.com>, alsa-devel@alsa-project.org
Subject: [PATCH - JACK PCM plugin 5/7] jack: Use internal snd_pcm_state to reduce amount of additional variables
Date: Wed, 24 Jan 2018 13:00:40 +0100	[thread overview]
Message-ID: <1516795241-10219-3-git-send-email-twischer@de.adit-jv.com> (raw)
In-Reply-To: <1516795241-10219-1-git-send-email-twischer@de.adit-jv.com>

From: Timo Wischer <twischer@de.adit-jv.com>

This variable will be used to exchange the status of the stream between
the ALSA and JACK thread.
In future commits it will also be used
to signal DRAINING state from the ALSA to JACK thread and
to signal XRUN state form the JACK to ALSA thread

Signed-off-by: Timo Wischer <twischer@de.adit-jv.com>

diff --git a/jack/pcm_jack.c b/jack/pcm_jack.c
index 53192dc..a42c8b5 100644
--- a/jack/pcm_jack.c
+++ b/jack/pcm_jack.c
@@ -36,7 +36,11 @@ typedef struct {
 	snd_pcm_ioplug_t io;
 
 	int fd;
-	int activated;		/* jack is activated? */
+
+	/* This variable is not always in sync with io->state
+	 * because it will be accessed by multiple threads.
+	 */
+	snd_pcm_state_t state;
 
 	char **port_names;
 	unsigned int num_ports;
@@ -122,8 +126,8 @@ static int pcm_poll_block_check(snd_pcm_ioplug_t *io)
 	snd_pcm_sframes_t avail;
 	snd_pcm_jack_t *jack = io->private_data;
 
-	if (io->state == SND_PCM_STATE_RUNNING ||
-	    (io->state == SND_PCM_STATE_PREPARED && io->stream == SND_PCM_STREAM_CAPTURE)) {
+	if (jack->state == SND_PCM_STATE_RUNNING ||
+	    (jack->state == SND_PCM_STATE_PREPARED && io->stream == SND_PCM_STREAM_CAPTURE)) {
 		avail = snd_pcm_avail_update(io->pcm);
 		if (avail >= 0 && avail < jack->min_avail) {
 			while (read(io->poll_fd, &buf, sizeof(buf)) == sizeof(buf))
@@ -227,7 +231,7 @@ snd_pcm_jack_process_cb(jack_nframes_t nframes, snd_pcm_ioplug_t *io)
 	}
 
 	hw_ptr = jack->hw_ptr;
-	if (io->state == SND_PCM_STATE_RUNNING) {
+	if (jack->state == SND_PCM_STATE_RUNNING) {
 		const snd_pcm_channel_area_t *areas = snd_pcm_ioplug_mmap_areas(io);
 
 		while (xfer < nframes) {
@@ -307,29 +311,31 @@ static int snd_pcm_jack_prepare(snd_pcm_ioplug_t *io)
 	else
 		pcm_poll_block_check(io); /* block capture pcm if that's XRUN recovery */
 
-	if (jack->ports)
-		return 0;
+	if (!jack->ports) {
+		jack->ports = calloc(io->channels, sizeof(jack_port_t*));
 
-	jack->ports = calloc(io->channels, sizeof(jack_port_t*));
-
-	for (i = 0; i < io->channels; i++) {
-		char port_name[32];
-		if (io->stream == SND_PCM_STREAM_PLAYBACK) {
+		for (i = 0; i < io->channels; i++) {
+			char port_name[32];
+			if (io->stream == SND_PCM_STREAM_PLAYBACK) {
 
-			sprintf(port_name, "out_%03d", i);
-			jack->ports[i] = jack_port_register(jack->client, port_name,
-							    JACK_DEFAULT_AUDIO_TYPE,
-							    JackPortIsOutput, 0);
-		} else {
-			sprintf(port_name, "in_%03d", i);
-			jack->ports[i] = jack_port_register(jack->client, port_name,
-							    JACK_DEFAULT_AUDIO_TYPE,
-							    JackPortIsInput, 0);
+				sprintf(port_name, "out_%03d", i);
+				jack->ports[i] = jack_port_register(jack->client, port_name,
+								    JACK_DEFAULT_AUDIO_TYPE,
+								    JackPortIsOutput, 0);
+			} else {
+				sprintf(port_name, "in_%03d", i);
+				jack->ports[i] = jack_port_register(jack->client, port_name,
+								    JACK_DEFAULT_AUDIO_TYPE,
+								    JackPortIsInput, 0);
+			}
 		}
+
+		jack_set_process_callback(jack->client,
+					  (JackProcessCallback)snd_pcm_jack_process_cb, io);
 	}
 
-	jack_set_process_callback(jack->client,
-				  (JackProcessCallback)snd_pcm_jack_process_cb, io);
+	jack->state = SND_PCM_STATE_PREPARED;
+
 	return 0;
 }
 
@@ -337,12 +343,11 @@ static int snd_pcm_jack_start(snd_pcm_ioplug_t *io)
 {
 	snd_pcm_jack_t *jack = io->private_data;
 	unsigned int i;
+	int err = 0;
 	
 	if (jack_activate (jack->client))
 		return -EIO;
 
-	jack->activated = 1;
-
 	for (i = 0; i < io->channels && i < jack->num_ports; i++) {
 		if (jack->port_names[i]) {
 			const char *src, *dst;
@@ -355,21 +360,27 @@ static int snd_pcm_jack_start(snd_pcm_ioplug_t *io)
 			}
 			if (jack_connect(jack->client, src, dst)) {
 				fprintf(stderr, "cannot connect %s to %s\n", src, dst);
-				return -EIO;
+				err = -EIO;
+				break;
 			}
 		}
 	}
+
+	/* do not start forwarding audio samples before the ports are connected */
+	jack->state = SND_PCM_STATE_RUNNING;
 	
-	return 0;
+	return err;
 }
 
 static int snd_pcm_jack_stop(snd_pcm_ioplug_t *io)
 {
 	snd_pcm_jack_t *jack = io->private_data;
-	
-	if (jack->activated) {
+	const snd_pcm_state_t state = jack->state;
+
+	if (state == SND_PCM_STATE_RUNNING ||
+	    state == SND_PCM_STATE_DRAINING ||
+	    state == SND_PCM_STATE_XRUN) {
 		jack_deactivate(jack->client);
-		jack->activated = 0;
 	}
 #if 0
 	unsigned i;
@@ -380,6 +391,9 @@ static int snd_pcm_jack_stop(snd_pcm_ioplug_t *io)
 		}
 	}
 #endif
+
+	jack->state = SND_PCM_STATE_SETUP;
+
 	return 0;
 }
 
@@ -491,6 +505,7 @@ static int snd_pcm_jack_open(snd_pcm_t **pcmp, const char *name,
 
 	jack->fd = -1;
 	jack->io.poll_fd = -1;
+	jack->state = SND_PCM_STATE_OPEN;
 
 	err = parse_ports(jack, stream == SND_PCM_STREAM_PLAYBACK ?
 			  playback_conf : capture_conf);
-- 
2.7.4

  parent reply	other threads:[~2018-01-24 12:00 UTC|newest]

Thread overview: 4+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-01-24 12:00 (no subject) twischer
2018-01-24 12:00 ` [PATCH - JACK PCM plugin 4/7] jack: Use ALSA data type for internal hardware pointer twischer
2018-01-24 12:00 ` twischer [this message]
2018-01-24 12:00 ` [PATCH - JACK PCM plugin 6/7] jack: Report Xruns to user application twischer

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1516795241-10219-3-git-send-email-twischer@de.adit-jv.com \
    --to=twischer@de.adit-jv.com \
    --cc=alsa-devel@alsa-project.org \
    --cc=patch@alsa-project.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.