Patch "pppoe: take ->needed_headroom of lower device into account on xmit" has been added to the 4.4-stable tree

[<gregkh@linuxfoundation.org>]

This is a note to let you know that I've just added the patch titled

    pppoe: take ->needed_headroom of lower device into account on xmit

to the 4.4-stable tree which can be found at:
    http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=summary

The filename of the patch is:
     pppoe-take-needed_headroom-of-lower-device-into-account-on-xmit.patch
and it can be found in the queue-4.4 subdirectory.

If you, or anyone else, feels it should not be added to the stable tree,
please let <stable@vger.kernel.org> know about it.


>From foo@baz Mon Jan 29 10:14:57 CET 2018
From: Guillaume Nault <g.nault@alphalink.fr>
Date: Mon, 22 Jan 2018 18:06:37 +0100
Subject: pppoe: take ->needed_headroom of lower device into account on xmit

From: Guillaume Nault <g.nault@alphalink.fr>


[ Upstream commit 02612bb05e51df8489db5e94d0cf8d1c81f87b0c ]

In pppoe_sendmsg(), reserving dev->hard_header_len bytes of headroom
was probably fine before the introduction of ->needed_headroom in
commit f5184d267c1a ("net: Allow netdevices to specify needed head/tailroom").

But now, virtual devices typically advertise the size of their overhead
in dev->needed_headroom, so we must also take it into account in
skb_reserve().
Allocation size of skb is also updated to take dev->needed_tailroom
into account and replace the arbitrary 32 bytes with the real size of
a PPPoE header.

This issue was discovered by syzbot, who connected a pppoe socket to a
gre device which had dev->header_ops->create == ipgre_header and
dev->hard_header_len == 0. Therefore, PPPoE didn't reserve any
headroom, and dev_hard_header() crashed when ipgre_header() tried to
prepend its header to skb->data.

skbuff: skb_under_panic: text:000000001d390b3a len:31 put:24
head:00000000d8ed776f data:000000008150e823 tail:0x7 end:0xc0 dev:gre0
------------[ cut here ]------------
kernel BUG at net/core/skbuff.c:104!
invalid opcode: 0000 [#1] SMP KASAN
Dumping ftrace buffer:
    (ftrace buffer empty)
Modules linked in:
CPU: 1 PID: 3670 Comm: syzkaller801466 Not tainted
4.15.0-rc7-next-20180115+ #97
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS
Google 01/01/2011
RIP: 0010:skb_panic+0x162/0x1f0 net/core/skbuff.c:100
RSP: 0018:ffff8801d9bd7840 EFLAGS: 00010282
RAX: 0000000000000083 RBX: ffff8801d4f083c0 RCX: 0000000000000000
RDX: 0000000000000083 RSI: 1ffff1003b37ae92 RDI: ffffed003b37aefc
RBP: ffff8801d9bd78a8 R08: 1ffff1003b37ae8a R09: 0000000000000000
R10: 0000000000000001 R11: 0000000000000000 R12: ffffffff86200de0
R13: ffffffff84a981ad R14: 0000000000000018 R15: ffff8801d2d34180
FS:  00000000019c4880(0000) GS:ffff8801db300000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00000000208bc000 CR3: 00000001d9111001 CR4: 00000000001606e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
  skb_under_panic net/core/skbuff.c:114 [inline]
  skb_push+0xce/0xf0 net/core/skbuff.c:1714
  ipgre_header+0x6d/0x4e0 net/ipv4/ip_gre.c:879
  dev_hard_header include/linux/netdevice.h:2723 [inline]
  pppoe_sendmsg+0x58e/0x8b0 drivers/net/ppp/pppoe.c:890
  sock_sendmsg_nosec net/socket.c:630 [inline]
  sock_sendmsg+0xca/0x110 net/socket.c:640
  sock_write_iter+0x31a/0x5d0 net/socket.c:909
  call_write_iter include/linux/fs.h:1775 [inline]
  do_iter_readv_writev+0x525/0x7f0 fs/read_write.c:653
  do_iter_write+0x154/0x540 fs/read_write.c:932
  vfs_writev+0x18a/0x340 fs/read_write.c:977
  do_writev+0xfc/0x2a0 fs/read_write.c:1012
  SYSC_writev fs/read_write.c:1085 [inline]
  SyS_writev+0x27/0x30 fs/read_write.c:1082
  entry_SYSCALL_64_fastpath+0x29/0xa0

Admittedly PPPoE shouldn't be allowed to run on non Ethernet-like
interfaces, but reserving space for ->needed_headroom is a more
fundamental issue that needs to be addressed first.

Same problem exists for __pppoe_xmit(), which also needs to take
dev->needed_headroom into account in skb_cow_head().

Fixes: f5184d267c1a ("net: Allow netdevices to specify needed head/tailroom")
Reported-by: syzbot+ed0838d0fa4c4f2b528e20286e6dc63effc7c14d@syzkaller.appspotmail.com
Signed-off-by: Guillaume Nault <g.nault@alphalink.fr>
Reviewed-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/net/ppp/pppoe.c |   11 ++++++-----
 1 file changed, 6 insertions(+), 5 deletions(-)

--- a/drivers/net/ppp/pppoe.c
+++ b/drivers/net/ppp/pppoe.c
@@ -860,6 +860,7 @@ static int pppoe_sendmsg(struct socket *
 	struct pppoe_hdr *ph;
 	struct net_device *dev;
 	char *start;
+	int hlen;
 
 	lock_sock(sk);
 	if (sock_flag(sk, SOCK_DEAD) || !(sk->sk_state & PPPOX_CONNECTED)) {
@@ -878,16 +879,16 @@ static int pppoe_sendmsg(struct socket *
 	if (total_len > (dev->mtu + dev->hard_header_len))
 		goto end;
 
-
-	skb = sock_wmalloc(sk, total_len + dev->hard_header_len + 32,
-			   0, GFP_KERNEL);
+	hlen = LL_RESERVED_SPACE(dev);
+	skb = sock_wmalloc(sk, hlen + sizeof(*ph) + total_len +
+			   dev->needed_tailroom, 0, GFP_KERNEL);
 	if (!skb) {
 		error = -ENOMEM;
 		goto end;
 	}
 
 	/* Reserve space for headers. */
-	skb_reserve(skb, dev->hard_header_len);
+	skb_reserve(skb, hlen);
 	skb_reset_network_header(skb);
 
 	skb->dev = dev;
@@ -948,7 +949,7 @@ static int __pppoe_xmit(struct sock *sk,
 	/* Copy the data if there is no space for the header or if it's
 	 * read-only.
 	 */
-	if (skb_cow_head(skb, sizeof(*ph) + dev->hard_header_len))
+	if (skb_cow_head(skb, LL_RESERVED_SPACE(dev) + sizeof(*ph)))
 		goto abort;
 
 	__skb_push(skb, sizeof(*ph));


Patches currently in stable-queue which might be from g.nault@alphalink.fr are

queue-4.4/pppoe-take-needed_headroom-of-lower-device-into-account-on-xmit.patch