From: <gregkh@linuxfoundation.org>
To: shigeru.yoshida@windriver.com, Haiqing.Bai@windriver.com,
Shigeru.Yoshida@windriver.com, gregkh@linuxfoundation.org,
stable@vger.kernel.org, stern@rowland.harvard.edu
Subject: patch "ohci-hcd: Fix race condition caused by ohci_urb_enqueue() and" added to usb-linus
Date: Thu, 15 Feb 2018 18:44:40 +0100 [thread overview]
Message-ID: <151871668063125@kroah.com> (raw)
This is a note to let you know that I've just added the patch titled
ohci-hcd: Fix race condition caused by ohci_urb_enqueue() and
to my usb git tree which can be found at
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb.git
in the usb-linus branch.
The patch will show up in the next release of the linux-next tree
(usually sometime within the next 24 hours during the week.)
The patch will hopefully also be merged in Linus's tree for the
next -rc kernel release.
If you have any questions about this process, please let me know.
>From b2685bdacdaab065c172b97b55ab46c6be77a037 Mon Sep 17 00:00:00 2001
From: Shigeru Yoshida <shigeru.yoshida@windriver.com>
Date: Fri, 2 Feb 2018 13:51:39 +0800
Subject: ohci-hcd: Fix race condition caused by ohci_urb_enqueue() and
io_watchdog_func()
Running io_watchdog_func() while ohci_urb_enqueue() is running can
cause a race condition where ohci->prev_frame_no is corrupted and the
watchdog can mis-detect following error:
ohci-platform 664a0800.usb: frame counter not updating; disabled
ohci-platform 664a0800.usb: HC died; cleaning up
Specifically, following scenario causes a race condition:
1. ohci_urb_enqueue() calls spin_lock_irqsave(&ohci->lock, flags)
and enters the critical section
2. ohci_urb_enqueue() calls timer_pending(&ohci->io_watchdog) and it
returns false
3. ohci_urb_enqueue() sets ohci->prev_frame_no to a frame number
read by ohci_frame_no(ohci)
4. ohci_urb_enqueue() schedules io_watchdog_func() with mod_timer()
5. ohci_urb_enqueue() calls spin_unlock_irqrestore(&ohci->lock,
flags) and exits the critical section
6. Later, ohci_urb_enqueue() is called
7. ohci_urb_enqueue() calls spin_lock_irqsave(&ohci->lock, flags)
and enters the critical section
8. The timer scheduled on step 4 expires and io_watchdog_func() runs
9. io_watchdog_func() calls spin_lock_irqsave(&ohci->lock, flags)
and waits on it because ohci_urb_enqueue() is already in the
critical section on step 7
10. ohci_urb_enqueue() calls timer_pending(&ohci->io_watchdog) and it
returns false
11. ohci_urb_enqueue() sets ohci->prev_frame_no to new frame number
read by ohci_frame_no(ohci) because the frame number proceeded
between step 3 and 6
12. ohci_urb_enqueue() schedules io_watchdog_func() with mod_timer()
13. ohci_urb_enqueue() calls spin_unlock_irqrestore(&ohci->lock,
flags) and exits the critical section, then wake up
io_watchdog_func() which is waiting on step 9
14. io_watchdog_func() enters the critical section
15. io_watchdog_func() calls ohci_frame_no(ohci) and set frame_no
variable to the frame number
16. io_watchdog_func() compares frame_no and ohci->prev_frame_no
On step 16, because this calling of io_watchdog_func() is scheduled on
step 4, the frame number set in ohci->prev_frame_no is expected to the
number set on step 3. However, ohci->prev_frame_no is overwritten on
step 11. Because step 16 is executed soon after step 11, the frame
number might not proceed, so ohci->prev_frame_no must equals to
frame_no.
To address above scenario, this patch introduces a special sentinel
value IO_WATCHDOG_OFF and set this value to ohci->prev_frame_no when
the watchdog is not pending or running. When ohci_urb_enqueue()
schedules the watchdog (step 4 and 12 above), it compares
ohci->prev_frame_no to IO_WATCHDOG_OFF so that ohci->prev_frame_no is
not overwritten while io_watchdog_func() is running.
Signed-off-by: Shigeru Yoshida <Shigeru.Yoshida@windriver.com>
Signed-off-by: Haiqing Bai <Haiqing.Bai@windriver.com>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/usb/host/ohci-hcd.c | 10 +++++++---
drivers/usb/host/ohci-hub.c | 4 +++-
2 files changed, 10 insertions(+), 4 deletions(-)
diff --git a/drivers/usb/host/ohci-hcd.c b/drivers/usb/host/ohci-hcd.c
index ee9676349333..84f88fa411cd 100644
--- a/drivers/usb/host/ohci-hcd.c
+++ b/drivers/usb/host/ohci-hcd.c
@@ -74,6 +74,7 @@ static const char hcd_name [] = "ohci_hcd";
#define STATECHANGE_DELAY msecs_to_jiffies(300)
#define IO_WATCHDOG_DELAY msecs_to_jiffies(275)
+#define IO_WATCHDOG_OFF 0xffffff00
#include "ohci.h"
#include "pci-quirks.h"
@@ -231,7 +232,7 @@ static int ohci_urb_enqueue (
}
/* Start up the I/O watchdog timer, if it's not running */
- if (!timer_pending(&ohci->io_watchdog) &&
+ if (ohci->prev_frame_no == IO_WATCHDOG_OFF &&
list_empty(&ohci->eds_in_use) &&
!(ohci->flags & OHCI_QUIRK_QEMU)) {
ohci->prev_frame_no = ohci_frame_no(ohci);
@@ -501,6 +502,7 @@ static int ohci_init (struct ohci_hcd *ohci)
return 0;
timer_setup(&ohci->io_watchdog, io_watchdog_func, 0);
+ ohci->prev_frame_no = IO_WATCHDOG_OFF;
ohci->hcca = dma_alloc_coherent (hcd->self.controller,
sizeof(*ohci->hcca), &ohci->hcca_dma, GFP_KERNEL);
@@ -730,7 +732,7 @@ static void io_watchdog_func(struct timer_list *t)
u32 head;
struct ed *ed;
struct td *td, *td_start, *td_next;
- unsigned frame_no;
+ unsigned frame_no, prev_frame_no = IO_WATCHDOG_OFF;
unsigned long flags;
spin_lock_irqsave(&ohci->lock, flags);
@@ -835,7 +837,7 @@ static void io_watchdog_func(struct timer_list *t)
}
}
if (!list_empty(&ohci->eds_in_use)) {
- ohci->prev_frame_no = frame_no;
+ prev_frame_no = frame_no;
ohci->prev_wdh_cnt = ohci->wdh_cnt;
ohci->prev_donehead = ohci_readl(ohci,
&ohci->regs->donehead);
@@ -845,6 +847,7 @@ static void io_watchdog_func(struct timer_list *t)
}
done:
+ ohci->prev_frame_no = prev_frame_no;
spin_unlock_irqrestore(&ohci->lock, flags);
}
@@ -973,6 +976,7 @@ static void ohci_stop (struct usb_hcd *hcd)
if (quirk_nec(ohci))
flush_work(&ohci->nec_work);
del_timer_sync(&ohci->io_watchdog);
+ ohci->prev_frame_no = IO_WATCHDOG_OFF;
ohci_writel (ohci, OHCI_INTR_MIE, &ohci->regs->intrdisable);
ohci_usb_reset(ohci);
diff --git a/drivers/usb/host/ohci-hub.c b/drivers/usb/host/ohci-hub.c
index fb7aaa3b9d06..634f3c7bf774 100644
--- a/drivers/usb/host/ohci-hub.c
+++ b/drivers/usb/host/ohci-hub.c
@@ -311,8 +311,10 @@ static int ohci_bus_suspend (struct usb_hcd *hcd)
rc = ohci_rh_suspend (ohci, 0);
spin_unlock_irq (&ohci->lock);
- if (rc == 0)
+ if (rc == 0) {
del_timer_sync(&ohci->io_watchdog);
+ ohci->prev_frame_no = IO_WATCHDOG_OFF;
+ }
return rc;
}
--
2.16.1
reply other threads:[~2018-02-15 17:44 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=151871668063125@kroah.com \
--to=gregkh@linuxfoundation.org \
--cc=Haiqing.Bai@windriver.com \
--cc=shigeru.yoshida@windriver.com \
--cc=stable@vger.kernel.org \
--cc=stern@rowland.harvard.edu \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.