All of lore.kernel.org
 help / color / mirror / Atom feed
From: <gregkh@linuxfoundation.org>
To: linux@dominikbrodowski.net, bp@alien8.de, brgerst@gmail.com,
	dvlasenk@redhat.com, gregkh@linuxfoundation.org, hpa@zytor.com,
	jpoimboe@redhat.com, luto@kernel.org, mingo@kernel.org,
	peterz@infradead.org, tglx@linutronix.de,
	torvalds@linux-foundation.org
Cc: <stable@vger.kernel.org>, <stable-commits@vger.kernel.org>
Subject: Patch "x86/entry/64: Merge SAVE_C_REGS and SAVE_EXTRA_REGS, remove unused extensions" has been added to the 4.14-stable tree
Date: Tue, 20 Feb 2018 11:26:06 +0100	[thread overview]
Message-ID: <151912236619211@kroah.com> (raw)


This is a note to let you know that I've just added the patch titled

    x86/entry/64: Merge SAVE_C_REGS and SAVE_EXTRA_REGS, remove unused extensions

to the 4.14-stable tree which can be found at:
    http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=summary

The filename of the patch is:
     x86-entry-64-merge-save_c_regs-and-save_extra_regs-remove-unused-extensions.patch
and it can be found in the queue-4.14 subdirectory.

If you, or anyone else, feels it should not be added to the stable tree,
please let <stable@vger.kernel.org> know about it.


>From 2e3f0098bc45f710a2f4cbcc94b80a1fae7a99a1 Mon Sep 17 00:00:00 2001
From: Dominik Brodowski <linux@dominikbrodowski.net>
Date: Sun, 11 Feb 2018 11:49:42 +0100
Subject: x86/entry/64: Merge SAVE_C_REGS and SAVE_EXTRA_REGS, remove unused extensions

From: Dominik Brodowski <linux@dominikbrodowski.net>

commit 2e3f0098bc45f710a2f4cbcc94b80a1fae7a99a1 upstream.

All current code paths call SAVE_C_REGS and then immediately
SAVE_EXTRA_REGS. Therefore, merge these two macros and order the MOV
sequeneces properly.

While at it, remove the macros to save all except specific registers,
as these macros have been unused for a long time.

Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: dan.j.williams@intel.com
Link: http://lkml.kernel.org/r/20180211104949.12992-2-linux@dominikbrodowski.net
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/x86/entry/calling.h  |   57 ++++++++++++----------------------------------
 arch/x86/entry/entry_64.S |   12 +++------
 2 files changed, 19 insertions(+), 50 deletions(-)

--- a/arch/x86/entry/calling.h
+++ b/arch/x86/entry/calling.h
@@ -101,49 +101,22 @@ For 32-bit we have the following convent
 	addq	$-(15*8), %rsp
 	.endm
 
-	.macro SAVE_C_REGS_HELPER offset=0 rax=1 rcx=1 r8910=1 r11=1
-	.if \r11
-	movq %r11, 6*8+\offset(%rsp)
-	.endif
-	.if \r8910
-	movq %r10, 7*8+\offset(%rsp)
-	movq %r9,  8*8+\offset(%rsp)
-	movq %r8,  9*8+\offset(%rsp)
-	.endif
-	.if \rax
-	movq %rax, 10*8+\offset(%rsp)
-	.endif
-	.if \rcx
-	movq %rcx, 11*8+\offset(%rsp)
-	.endif
-	movq %rdx, 12*8+\offset(%rsp)
-	movq %rsi, 13*8+\offset(%rsp)
+	.macro SAVE_REGS offset=0
 	movq %rdi, 14*8+\offset(%rsp)
-	UNWIND_HINT_REGS offset=\offset extra=0
-	.endm
-	.macro SAVE_C_REGS offset=0
-	SAVE_C_REGS_HELPER \offset, 1, 1, 1, 1
-	.endm
-	.macro SAVE_C_REGS_EXCEPT_RAX_RCX offset=0
-	SAVE_C_REGS_HELPER \offset, 0, 0, 1, 1
-	.endm
-	.macro SAVE_C_REGS_EXCEPT_R891011
-	SAVE_C_REGS_HELPER 0, 1, 1, 0, 0
-	.endm
-	.macro SAVE_C_REGS_EXCEPT_RCX_R891011
-	SAVE_C_REGS_HELPER 0, 1, 0, 0, 0
-	.endm
-	.macro SAVE_C_REGS_EXCEPT_RAX_RCX_R11
-	SAVE_C_REGS_HELPER 0, 0, 0, 1, 0
-	.endm
-
-	.macro SAVE_EXTRA_REGS offset=0
-	movq %r15, 0*8+\offset(%rsp)
-	movq %r14, 1*8+\offset(%rsp)
-	movq %r13, 2*8+\offset(%rsp)
-	movq %r12, 3*8+\offset(%rsp)
-	movq %rbp, 4*8+\offset(%rsp)
+	movq %rsi, 13*8+\offset(%rsp)
+	movq %rdx, 12*8+\offset(%rsp)
+	movq %rcx, 11*8+\offset(%rsp)
+	movq %rax, 10*8+\offset(%rsp)
+	movq %r8,  9*8+\offset(%rsp)
+	movq %r9,  8*8+\offset(%rsp)
+	movq %r10, 7*8+\offset(%rsp)
+	movq %r11, 6*8+\offset(%rsp)
 	movq %rbx, 5*8+\offset(%rsp)
+	movq %rbp, 4*8+\offset(%rsp)
+	movq %r12, 3*8+\offset(%rsp)
+	movq %r13, 2*8+\offset(%rsp)
+	movq %r14, 1*8+\offset(%rsp)
+	movq %r15, 0*8+\offset(%rsp)
 	UNWIND_HINT_REGS offset=\offset
 	.endm
 
@@ -197,7 +170,7 @@ For 32-bit we have the following convent
  * is just setting the LSB, which makes it an invalid stack address and is also
  * a signal to the unwinder that it's a pt_regs pointer in disguise.
  *
- * NOTE: This macro must be used *after* SAVE_EXTRA_REGS because it corrupts
+ * NOTE: This macro must be used *after* SAVE_REGS because it corrupts
  * the original rbp.
  */
 .macro ENCODE_FRAME_POINTER ptregs_offset=0
--- a/arch/x86/entry/entry_64.S
+++ b/arch/x86/entry/entry_64.S
@@ -569,8 +569,7 @@ END(irq_entries_start)
 1:
 
 	ALLOC_PT_GPREGS_ON_STACK
-	SAVE_C_REGS
-	SAVE_EXTRA_REGS
+	SAVE_REGS
 	CLEAR_REGS_NOSPEC
 	ENCODE_FRAME_POINTER
 
@@ -1126,8 +1125,7 @@ ENTRY(xen_failsafe_callback)
 	UNWIND_HINT_IRET_REGS
 	pushq	$-1 /* orig_ax = -1 => not a system call */
 	ALLOC_PT_GPREGS_ON_STACK
-	SAVE_C_REGS
-	SAVE_EXTRA_REGS
+	SAVE_REGS
 	CLEAR_REGS_NOSPEC
 	ENCODE_FRAME_POINTER
 	jmp	error_exit
@@ -1172,8 +1170,7 @@ idtentry machine_check		do_mce			has_err
 ENTRY(paranoid_entry)
 	UNWIND_HINT_FUNC
 	cld
-	SAVE_C_REGS 8
-	SAVE_EXTRA_REGS 8
+	SAVE_REGS 8
 	CLEAR_REGS_NOSPEC
 	ENCODE_FRAME_POINTER 8
 	movl	$1, %ebx
@@ -1225,8 +1222,7 @@ END(paranoid_exit)
 ENTRY(error_entry)
 	UNWIND_HINT_FUNC
 	cld
-	SAVE_C_REGS 8
-	SAVE_EXTRA_REGS 8
+	SAVE_REGS 8
 	CLEAR_REGS_NOSPEC
 	ENCODE_FRAME_POINTER 8
 	testb	$3, CS+8(%rsp)


Patches currently in stable-queue which might be from linux@dominikbrodowski.net are

queue-4.14/x86-entry-64-interleave-xor-register-clearing-with-push-instructions.patch
queue-4.14/x86-entry-64-merge-the-pop_c_regs-and-pop_extra_regs-macros-into-a-single-pop_regs-macro.patch
queue-4.14/x86-entry-64-remove-the-unused-icebp-macro.patch
queue-4.14/x86-entry-64-use-push_and_clean_regs-in-more-cases.patch
queue-4.14/selftests-x86-disable-tests-requiring-32-bit-support-on-pure-64-bit-systems.patch
queue-4.14/x86-entry-64-fix-paranoid_entry-frame-pointer-warning.patch
queue-4.14/x86-entry-64-merge-save_c_regs-and-save_extra_regs-remove-unused-extensions.patch
queue-4.14/selftests-x86-do-not-rely-on-int-0x80-in-single_step_syscall.c.patch
queue-4.14/selftests-x86-fix-vdso-selftest-segfault-for-vsyscall-none.patch
queue-4.14/x86-entry-64-indent-push_and_clear_regs-and-pop_regs-properly.patch
queue-4.14/selftests-x86-clean-up-and-document-sscanf-usage.patch
queue-4.14/selftests-x86-do-not-rely-on-int-0x80-in-test_mremap_vdso.c.patch
queue-4.14/x86-entry-64-get-rid-of-the-alloc_pt_gpregs_on_stack-and-save_and_clear_regs-macros.patch
queue-4.14/x86-entry-64-introduce-the-push_and_clean_regs-macro.patch

                 reply	other threads:[~2018-02-20 10:26 UTC|newest]

Thread overview: [no followups] expand[flat|nested]  mbox.gz  Atom feed

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=151912236619211@kroah.com \
    --to=gregkh@linuxfoundation.org \
    --cc=bp@alien8.de \
    --cc=brgerst@gmail.com \
    --cc=dvlasenk@redhat.com \
    --cc=hpa@zytor.com \
    --cc=jpoimboe@redhat.com \
    --cc=linux@dominikbrodowski.net \
    --cc=luto@kernel.org \
    --cc=mingo@kernel.org \
    --cc=peterz@infradead.org \
    --cc=stable-commits@vger.kernel.org \
    --cc=stable@vger.kernel.org \
    --cc=tglx@linutronix.de \
    --cc=torvalds@linux-foundation.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.