From: <gregkh@linuxfoundation.org>
To: al.kochet@gmail.com, alexander.levin@microsoft.com,
davem@davemloft.net, gregkh@linuxfoundation.org
Cc: <stable@vger.kernel.org>, <stable-commits@vger.kernel.org>
Subject: Patch "net: arc_emac: fix arc_emac_rx() error paths" has been added to the 3.18-stable tree
Date: Wed, 28 Feb 2018 16:17:34 +0100 [thread overview]
Message-ID: <151983105497208@kroah.com> (raw)
This is a note to let you know that I've just added the patch titled
net: arc_emac: fix arc_emac_rx() error paths
to the 3.18-stable tree which can be found at:
http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=summary
The filename of the patch is:
net-arc_emac-fix-arc_emac_rx-error-paths.patch
and it can be found in the queue-3.18 subdirectory.
If you, or anyone else, feels it should not be added to the stable tree,
please let <stable@vger.kernel.org> know about it.
>From foo@baz Wed Feb 28 16:16:23 CET 2018
From: Alexander Kochetkov <al.kochet@gmail.com>
Date: Fri, 15 Dec 2017 20:20:06 +0300
Subject: net: arc_emac: fix arc_emac_rx() error paths
From: Alexander Kochetkov <al.kochet@gmail.com>
[ Upstream commit e688822d035b494071ecbadcccbd6f3325fb0f59 ]
arc_emac_rx() has some issues found by code review.
In case netdev_alloc_skb_ip_align() or dma_map_single() failure
rx fifo entry will not be returned to EMAC.
In case dma_map_single() failure previously allocated skb became
lost to driver. At the same time address of newly allocated skb
will not be provided to EMAC.
Signed-off-by: Alexander Kochetkov <al.kochet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/net/ethernet/arc/emac_main.c | 53 ++++++++++++++++++++---------------
1 file changed, 31 insertions(+), 22 deletions(-)
--- a/drivers/net/ethernet/arc/emac_main.c
+++ b/drivers/net/ethernet/arc/emac_main.c
@@ -250,39 +250,48 @@ static int arc_emac_rx(struct net_device
continue;
}
- pktlen = info & LEN_MASK;
- stats->rx_packets++;
- stats->rx_bytes += pktlen;
- skb = rx_buff->skb;
- skb_put(skb, pktlen);
- skb->dev = ndev;
- skb->protocol = eth_type_trans(skb, ndev);
-
- dma_unmap_single(&ndev->dev, dma_unmap_addr(rx_buff, addr),
- dma_unmap_len(rx_buff, len), DMA_FROM_DEVICE);
-
- /* Prepare the BD for next cycle */
- rx_buff->skb = netdev_alloc_skb_ip_align(ndev,
- EMAC_BUFFER_SIZE);
- if (unlikely(!rx_buff->skb)) {
+ /* Prepare the BD for next cycle. netif_receive_skb()
+ * only if new skb was allocated and mapped to avoid holes
+ * in the RX fifo.
+ */
+ skb = netdev_alloc_skb_ip_align(ndev, EMAC_BUFFER_SIZE);
+ if (unlikely(!skb)) {
+ if (net_ratelimit())
+ netdev_err(ndev, "cannot allocate skb\n");
+ /* Return ownership to EMAC */
+ rxbd->info = cpu_to_le32(FOR_EMAC | EMAC_BUFFER_SIZE);
stats->rx_errors++;
- /* Because receive_skb is below, increment rx_dropped */
stats->rx_dropped++;
continue;
}
- /* receive_skb only if new skb was allocated to avoid holes */
- netif_receive_skb(skb);
-
- addr = dma_map_single(&ndev->dev, (void *)rx_buff->skb->data,
+ addr = dma_map_single(&ndev->dev, (void *)skb->data,
EMAC_BUFFER_SIZE, DMA_FROM_DEVICE);
if (dma_mapping_error(&ndev->dev, addr)) {
if (net_ratelimit())
- netdev_err(ndev, "cannot dma map\n");
- dev_kfree_skb(rx_buff->skb);
+ netdev_err(ndev, "cannot map dma buffer\n");
+ dev_kfree_skb(skb);
+ /* Return ownership to EMAC */
+ rxbd->info = cpu_to_le32(FOR_EMAC | EMAC_BUFFER_SIZE);
stats->rx_errors++;
+ stats->rx_dropped++;
continue;
}
+
+ /* unmap previosly mapped skb */
+ dma_unmap_single(&ndev->dev, dma_unmap_addr(rx_buff, addr),
+ dma_unmap_len(rx_buff, len), DMA_FROM_DEVICE);
+
+ pktlen = info & LEN_MASK;
+ stats->rx_packets++;
+ stats->rx_bytes += pktlen;
+ skb_put(rx_buff->skb, pktlen);
+ rx_buff->skb->dev = ndev;
+ rx_buff->skb->protocol = eth_type_trans(rx_buff->skb, ndev);
+
+ netif_receive_skb(rx_buff->skb);
+
+ rx_buff->skb = skb;
dma_unmap_addr_set(rx_buff, addr, addr);
dma_unmap_len_set(rx_buff, len, EMAC_BUFFER_SIZE);
Patches currently in stable-queue which might be from al.kochet@gmail.com are
queue-3.18/net-arc_emac-fix-arc_emac_rx-error-paths.patch
reply other threads:[~2018-02-28 15:17 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=151983105497208@kroah.com \
--to=gregkh@linuxfoundation.org \
--cc=al.kochet@gmail.com \
--cc=alexander.levin@microsoft.com \
--cc=davem@davemloft.net \
--cc=stable-commits@vger.kernel.org \
--cc=stable@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.