Patch "tg3: Add workaround to restrict 5762 MRRS to 2048" has been added to the 4.14-stable tree

[<gregkh@linuxfoundation.org>]

This is a note to let you know that I've just added the patch titled

    tg3: Add workaround to restrict 5762 MRRS to 2048

to the 4.14-stable tree which can be found at:
    http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=summary

The filename of the patch is:
     tg3-add-workaround-to-restrict-5762-mrrs-to-2048.patch
and it can be found in the queue-4.14 subdirectory.

If you, or anyone else, feels it should not be added to the stable tree,
please let <stable@vger.kernel.org> know about it.


>From foo@baz Wed Feb 28 16:23:28 CET 2018
From: Siva Reddy Kallam <siva.kallam@broadcom.com>
Date: Fri, 22 Dec 2017 16:05:28 +0530
Subject: tg3: Add workaround to restrict 5762 MRRS to 2048

From: Siva Reddy Kallam <siva.kallam@broadcom.com>


[ Upstream commit 4419bb1cedcda0272e1dc410345c5a1d1da0e367 ]

One of AMD based server with 5762 hangs with jumbo frame traffic.
This AMD platform has southbridge limitation which is restricting MRRS
to 4000. As a work around, driver to restricts the MRRS to 2048 for
this particular 5762 NX1 card.

Signed-off-by: Siva Reddy Kallam <siva.kallam@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/net/ethernet/broadcom/tg3.c |   10 ++++++++++
 drivers/net/ethernet/broadcom/tg3.h |    4 ++++
 2 files changed, 14 insertions(+)

--- a/drivers/net/ethernet/broadcom/tg3.c
+++ b/drivers/net/ethernet/broadcom/tg3.c
@@ -10052,6 +10052,16 @@ static int tg3_reset_hw(struct tg3 *tp,
 
 	tw32(GRC_MODE, tp->grc_mode | val);
 
+	/* On one of the AMD platform, MRRS is restricted to 4000 because of
+	 * south bridge limitation. As a workaround, Driver is setting MRRS
+	 * to 2048 instead of default 4096.
+	 */
+	if (tp->pdev->subsystem_vendor == PCI_VENDOR_ID_DELL &&
+	    tp->pdev->subsystem_device == TG3PCI_SUBDEVICE_ID_DELL_5762) {
+		val = tr32(TG3PCI_DEV_STATUS_CTRL) & ~MAX_READ_REQ_MASK;
+		tw32(TG3PCI_DEV_STATUS_CTRL, val | MAX_READ_REQ_SIZE_2048);
+	}
+
 	/* Setup the timer prescalar register.  Clock is always 66Mhz. */
 	val = tr32(GRC_MISC_CFG);
 	val &= ~0xff;
--- a/drivers/net/ethernet/broadcom/tg3.h
+++ b/drivers/net/ethernet/broadcom/tg3.h
@@ -96,6 +96,7 @@
 #define TG3PCI_SUBDEVICE_ID_DELL_JAGUAR		0x0106
 #define TG3PCI_SUBDEVICE_ID_DELL_MERLOT		0x0109
 #define TG3PCI_SUBDEVICE_ID_DELL_SLIM_MERLOT	0x010a
+#define TG3PCI_SUBDEVICE_ID_DELL_5762		0x07f0
 #define TG3PCI_SUBVENDOR_ID_COMPAQ		PCI_VENDOR_ID_COMPAQ
 #define TG3PCI_SUBDEVICE_ID_COMPAQ_BANSHEE	0x007c
 #define TG3PCI_SUBDEVICE_ID_COMPAQ_BANSHEE_2	0x009a
@@ -281,6 +282,9 @@
 #define TG3PCI_STD_RING_PROD_IDX	0x00000098 /* 64-bit */
 #define TG3PCI_RCV_RET_RING_CON_IDX	0x000000a0 /* 64-bit */
 /* 0xa8 --> 0xb8 unused */
+#define TG3PCI_DEV_STATUS_CTRL		0x000000b4
+#define  MAX_READ_REQ_SIZE_2048		 0x00004000
+#define  MAX_READ_REQ_MASK		 0x00007000
 #define TG3PCI_DUAL_MAC_CTRL		0x000000b8
 #define  DUAL_MAC_CTRL_CH_MASK		 0x00000003
 #define  DUAL_MAC_CTRL_ID		 0x00000004


Patches currently in stable-queue which might be from siva.kallam@broadcom.com are

queue-4.14/tg3-enable-phy-reset-in-mtu-change-path-for-5720.patch
queue-4.14/tg3-add-workaround-to-restrict-5762-mrrs-to-2048.patch