Patch "arm64: dts: marvell: mcbin: add comphy references to Ethernet ports" has been added to the 4.14-stable tree

[<gregkh@linuxfoundation.org>]

This is a note to let you know that I've just added the patch titled

    arm64: dts: marvell: mcbin: add comphy references to Ethernet ports

to the 4.14-stable tree which can be found at:
    http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=summary

The filename of the patch is:
     arm64-dts-marvell-mcbin-add-comphy-references-to-ethernet-ports.patch
and it can be found in the queue-4.14 subdirectory.

If you, or anyone else, feels it should not be added to the stable tree,
please let <stable@vger.kernel.org> know about it.


>From 760b3843fcd88f2a46e66eec08e2e6023a425809 Mon Sep 17 00:00:00 2001
From: Antoine Tenart <antoine.tenart@free-electrons.com>
Date: Thu, 21 Sep 2017 09:54:07 +0200
Subject: arm64: dts: marvell: mcbin: add comphy references to Ethernet ports

From: Antoine Tenart <antoine.tenart@free-electrons.com>

commit 760b3843fcd88f2a46e66eec08e2e6023a425809 upstream.

This patch adds comphy phandles to the Ethernet ports in the mcbin
device tree. The comphy is used to configure the serdes PHYs used by
these ports.

Signed-off-by: Antoine Tenart <antoine.tenart@free-electrons.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
Cc: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/arm64/boot/dts/marvell/armada-8040-mcbin.dts |    9 +++++++++
 1 file changed, 9 insertions(+)

--- a/arch/arm64/boot/dts/marvell/armada-8040-mcbin.dts
+++ b/arch/arm64/boot/dts/marvell/armada-8040-mcbin.dts
@@ -228,8 +228,11 @@
 
 &cpm_eth0 {
 	status = "okay";
+	/* Network PHY */
 	phy = <&phy0>;
 	phy-mode = "10gbase-kr";
+	/* Generic PHY, providing serdes lanes */
+	phys = <&cpm_comphy4 0>;
 };
 
 &cpm_sata0 {
@@ -263,15 +266,21 @@
 
 &cps_eth0 {
 	status = "okay";
+	/* Network PHY */
 	phy = <&phy8>;
 	phy-mode = "10gbase-kr";
+	/* Generic PHY, providing serdes lanes */
+	phys = <&cps_comphy4 0>;
 };
 
 &cps_eth1 {
 	/* CPS Lane 0 - J5 (Gigabit RJ45) */
 	status = "okay";
+	/* Network PHY */
 	phy = <&ge_phy>;
 	phy-mode = "sgmii";
+	/* Generic PHY, providing serdes lanes */
+	phys = <&cps_comphy0 1>;
 };
 
 &cps_pinctrl {


Patches currently in stable-queue which might be from antoine.tenart@free-electrons.com are

queue-4.14/arm64-dts-marvell-mcbin-add-comphy-references-to-ethernet-ports.patch
queue-4.14/crypto-inside-secure-per-request-invalidation.patch
queue-4.14/arm64-dts-marvell-add-comphy-nodes-on-cp110-master-and-slave.patch
queue-4.14/crypto-inside-secure-fix-request-allocations-in-invalidation-path.patch
queue-4.14/crypto-inside-secure-free-requests-even-if-their-handling-failed.patch