From: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
To: Javier Arteaga <javier@emutex.com>,
Mika Westerberg <mika.westerberg@linux.intel.com>
Cc: Heikki Krogerus <heikki.krogerus@linux.intel.com>,
Linus Walleij <linus.walleij@linaro.org>,
linux-gpio@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: Re: [PATCH] pinctrl: intel: Implement intel_gpio_get_direction callback
Date: Tue, 06 Mar 2018 16:56:05 +0200 [thread overview]
Message-ID: <1520348165.10722.438.camel@linux.intel.com> (raw)
In-Reply-To: <3585081b-70af-5c31-08c0-84e96b6055bc@emutex.com>
On Tue, 2018-03-06 at 14:31 +0000, Javier Arteaga wrote:
> (Fix Andy's Cc: - apologies)
>
> On 06/03/2018 13:42, Javier Arteaga wrote:
> > Allows querying GPIO direction from the pad config register.
> > If the pad is not in GPIO mode, return an error.
> >
> > Signed-off-by: Javier Arteaga <javier@emutex.com>
> > ---
> > This is needed by the drivers for the UP Squared board, an APL-based
> > platform. (For now, these drivers are out-of-tree.)
> >
> > An earlier version of this patch was reviewed some time ago by Andy
> > Shevchenko outside of the mailing lists:
> > <https://github.com/emutex/ubilinux-kernel/commit/708a776f2ffd1b1c>
> >
Yes, this one look good!
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
> > drivers/pinctrl/intel/pinctrl-intel.c | 19 +++++++++++++++++++
> > 1 file changed, 19 insertions(+)
> >
> > diff --git a/drivers/pinctrl/intel/pinctrl-intel.c
> > b/drivers/pinctrl/intel/pinctrl-intel.c
> > index 96e73e30204e..1e24a6b8a64e 100644
> > --- a/drivers/pinctrl/intel/pinctrl-intel.c
> > +++ b/drivers/pinctrl/intel/pinctrl-intel.c
> > @@ -788,6 +788,24 @@ static void intel_gpio_set(struct gpio_chip
> > *chip, unsigned offset, int value)
> > raw_spin_unlock_irqrestore(&pctrl->lock, flags);
> > }
> >
> > +static int intel_gpio_get_direction(struct gpio_chip *chip,
> > unsigned int offset)
> > +{
> > + struct intel_pinctrl *pctrl = gpiochip_get_data(chip);
> > + void __iomem *reg;
> > + u32 padcfg0;
> > +
> > + reg = intel_get_padcfg(pctrl, offset, PADCFG0);
> > + if (!reg)
> > + return -EINVAL;
> > +
> > + padcfg0 = readl(reg);
> > +
> > + if (padcfg0 & PADCFG0_PMODE_MASK)
> > + return -EINVAL;
Actually we might return direction of GPIO function while pin is in some
other mode, though it would probably make not much sense in practice.
> > +
> > + return !!(padcfg0 & PADCFG0_GPIOTXDIS);
> > +}
> > +
> > static int intel_gpio_direction_input(struct gpio_chip *chip,
> > unsigned offset)
> > {
> > return pinctrl_gpio_direction_input(chip->base + offset);
> > @@ -804,6 +822,7 @@ static const struct gpio_chip intel_gpio_chip =
> > {
> > .owner = THIS_MODULE,
> > .request = gpiochip_generic_request,
> > .free = gpiochip_generic_free,
> > + .get_direction = intel_gpio_get_direction,
> > .direction_input = intel_gpio_direction_input,
> > .direction_output = intel_gpio_direction_output,
> > .get = intel_gpio_get,
> >
--
Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Intel Finland Oy
next prev parent reply other threads:[~2018-03-06 14:56 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-03-06 13:42 [PATCH] pinctrl: intel: Implement intel_gpio_get_direction callback Javier Arteaga
2018-03-06 14:31 ` Javier Arteaga
2018-03-06 14:56 ` Andy Shevchenko [this message]
2018-03-06 14:59 ` Andy Shevchenko
2018-03-06 15:29 ` Javier Arteaga
2018-03-06 18:06 ` Mika Westerberg
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1520348165.10722.438.camel@linux.intel.com \
--to=andriy.shevchenko@linux.intel.com \
--cc=heikki.krogerus@linux.intel.com \
--cc=javier@emutex.com \
--cc=linus.walleij@linaro.org \
--cc=linux-gpio@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=mika.westerberg@linux.intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.