All of lore.kernel.org
 help / color / mirror / Atom feed
From: <gregkh@linuxfoundation.org>
To: galp@mellanox.com, gregkh@linuxfoundation.org, saeedm@mellanox.com
Cc: <stable@vger.kernel.org>, <stable-commits@vger.kernel.org>
Subject: Patch "net/mlx5e: Fix TCP checksum in LRO buffers" has been added to the 4.14-stable tree
Date: Tue, 06 Mar 2018 19:30:31 -0800	[thread overview]
Message-ID: <1520393431107158@kroah.com> (raw)


This is a note to let you know that I've just added the patch titled

    net/mlx5e: Fix TCP checksum in LRO buffers

to the 4.14-stable tree which can be found at:
    http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=summary

The filename of the patch is:
     net-mlx5e-fix-tcp-checksum-in-lro-buffers.patch
and it can be found in the queue-4.14 subdirectory.

If you, or anyone else, feels it should not be added to the stable tree,
please let <stable@vger.kernel.org> know about it.


>From foo@baz Tue Mar  6 19:02:12 PST 2018
From: Gal Pressman <galp@mellanox.com>
Date: Wed, 20 Dec 2017 08:48:24 +0200
Subject: net/mlx5e: Fix TCP checksum in LRO buffers

From: Gal Pressman <galp@mellanox.com>


[ Upstream commit 8babd44d2079079f9d5a4aca7005aed80236efe0 ]

When receiving an LRO packet, the checksum field is set by the hardware
to the checksum of the first coalesced packet. Obviously, this checksum
is not valid for the merged LRO packet and should be fixed.  We can use
the CQE checksum which covers the checksum of the entire merged packet
TCP payload to help us calculate the checksum incrementally.

Tested by sending IPv4/6 traffic with LRO enabled, RX checksum disabled
and watching nstat checksum error counters (in addition to the obvious
bandwidth drop caused by checksum errors).

This bug is usually "hidden" since LRO packets would go through the
CHECKSUM_UNNECESSARY flow which does not validate the packet checksum.

It's important to note that previous to this patch, LRO packets provided
with CHECKSUM_UNNECESSARY are indeed packets with a correct validated
checksum (even though the checksum inside the TCP header is incorrect),
since the hardware LRO aggregation is terminated upon receiving a packet
with bad checksum.

Fixes: e586b3b0baee ("net/mlx5: Ethernet Datapath files")
Signed-off-by: Gal Pressman <galp@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/net/ethernet/mellanox/mlx5/core/en_rx.c |   47 +++++++++++++++++-------
 1 file changed, 34 insertions(+), 13 deletions(-)

--- a/drivers/net/ethernet/mellanox/mlx5/core/en_rx.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/en_rx.c
@@ -36,6 +36,7 @@
 #include <linux/tcp.h>
 #include <linux/bpf_trace.h>
 #include <net/busy_poll.h>
+#include <net/ip6_checksum.h>
 #include "en.h"
 #include "en_tc.h"
 #include "eswitch.h"
@@ -546,20 +547,33 @@ bool mlx5e_post_rx_mpwqes(struct mlx5e_r
 	return true;
 }
 
+static void mlx5e_lro_update_tcp_hdr(struct mlx5_cqe64 *cqe, struct tcphdr *tcp)
+{
+	u8 l4_hdr_type = get_cqe_l4_hdr_type(cqe);
+	u8 tcp_ack     = (l4_hdr_type == CQE_L4_HDR_TYPE_TCP_ACK_NO_DATA) ||
+			 (l4_hdr_type == CQE_L4_HDR_TYPE_TCP_ACK_AND_DATA);
+
+	tcp->check                      = 0;
+	tcp->psh                        = get_cqe_lro_tcppsh(cqe);
+
+	if (tcp_ack) {
+		tcp->ack                = 1;
+		tcp->ack_seq            = cqe->lro_ack_seq_num;
+		tcp->window             = cqe->lro_tcp_win;
+	}
+}
+
 static void mlx5e_lro_update_hdr(struct sk_buff *skb, struct mlx5_cqe64 *cqe,
 				 u32 cqe_bcnt)
 {
 	struct ethhdr	*eth = (struct ethhdr *)(skb->data);
 	struct tcphdr	*tcp;
 	int network_depth = 0;
+	__wsum check;
 	__be16 proto;
 	u16 tot_len;
 	void *ip_p;
 
-	u8 l4_hdr_type = get_cqe_l4_hdr_type(cqe);
-	u8 tcp_ack = (l4_hdr_type == CQE_L4_HDR_TYPE_TCP_ACK_NO_DATA) ||
-		(l4_hdr_type == CQE_L4_HDR_TYPE_TCP_ACK_AND_DATA);
-
 	skb->mac_len = ETH_HLEN;
 	proto = __vlan_get_protocol(skb, eth->h_proto, &network_depth);
 
@@ -577,23 +591,30 @@ static void mlx5e_lro_update_hdr(struct
 		ipv4->check             = 0;
 		ipv4->check             = ip_fast_csum((unsigned char *)ipv4,
 						       ipv4->ihl);
+
+		mlx5e_lro_update_tcp_hdr(cqe, tcp);
+		check = csum_partial(tcp, tcp->doff * 4,
+				     csum_unfold((__force __sum16)cqe->check_sum));
+		/* Almost done, don't forget the pseudo header */
+		tcp->check = csum_tcpudp_magic(ipv4->saddr, ipv4->daddr,
+					       tot_len - sizeof(struct iphdr),
+					       IPPROTO_TCP, check);
 	} else {
+		u16 payload_len = tot_len - sizeof(struct ipv6hdr);
 		struct ipv6hdr *ipv6 = ip_p;
 
 		tcp = ip_p + sizeof(struct ipv6hdr);
 		skb_shinfo(skb)->gso_type = SKB_GSO_TCPV6;
 
 		ipv6->hop_limit         = cqe->lro_min_ttl;
-		ipv6->payload_len       = cpu_to_be16(tot_len -
-						      sizeof(struct ipv6hdr));
-	}
+		ipv6->payload_len       = cpu_to_be16(payload_len);
 
-	tcp->psh = get_cqe_lro_tcppsh(cqe);
-
-	if (tcp_ack) {
-		tcp->ack                = 1;
-		tcp->ack_seq            = cqe->lro_ack_seq_num;
-		tcp->window             = cqe->lro_tcp_win;
+		mlx5e_lro_update_tcp_hdr(cqe, tcp);
+		check = csum_partial(tcp, tcp->doff * 4,
+				     csum_unfold((__force __sum16)cqe->check_sum));
+		/* Almost done, don't forget the pseudo header */
+		tcp->check = csum_ipv6_magic(&ipv6->saddr, &ipv6->daddr, payload_len,
+					     IPPROTO_TCP, check);
 	}
 }
 


Patches currently in stable-queue which might be from galp@mellanox.com are

queue-4.14/net-mlx5e-specify-numa-node-when-allocating-drop-rq.patch
queue-4.14/net-mlx5e-fix-tcp-checksum-in-lro-buffers.patch

                 reply	other threads:[~2018-03-07  3:30 UTC|newest]

Thread overview: [no followups] expand[flat|nested]  mbox.gz  Atom feed

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1520393431107158@kroah.com \
    --to=gregkh@linuxfoundation.org \
    --cc=galp@mellanox.com \
    --cc=saeedm@mellanox.com \
    --cc=stable-commits@vger.kernel.org \
    --cc=stable@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.