From: Tomer Maimon <tmaimon77@gmail.com>
To: robh+dt@kernel.org, mark.rutland@arm.com,
daniel.lezcano@linaro.org, tglx@linutronix.de,
avifishman70@gmail.com, brendanhiggins@google.com,
venture@google.com, joel@jms.id.au
Cc: devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
openbmc@lists.ozlabs.org, Tomer Maimon <tmaimon77@gmail.com>
Subject: [PATCH v5 2/2] clocksource/drivers/npcm: Add NPCM7xx timer driver
Date: Thu, 8 Mar 2018 17:24:58 +0200 [thread overview]
Message-ID: <1520522698-16153-3-git-send-email-tmaimon77@gmail.com> (raw)
In-Reply-To: <1520522698-16153-1-git-send-email-tmaimon77@gmail.com>
Add Nuvoton BMC NPCM7xx timer driver.
The clocksource Enable 24-bit TIMER0 and TIMER1 counters,
while TIMER0 serve as clockevent and TIMER1 serve as clocksource.
Signed-off-by: Tomer Maimon <tmaimon77@gmail.com>
Reviewed-by: Brendan Higgins <brendanhiggins@xxxxxxxxxx>
---
drivers/clocksource/Kconfig | 8 ++
drivers/clocksource/Makefile | 1 +
drivers/clocksource/timer-npcm7xx.c | 215 ++++++++++++++++++++++++++++++++++++
3 files changed, 224 insertions(+)
create mode 100644 drivers/clocksource/timer-npcm7xx.c
diff --git a/drivers/clocksource/Kconfig b/drivers/clocksource/Kconfig
index b3b4ed9b6874..76194bc20bdf 100644
--- a/drivers/clocksource/Kconfig
+++ b/drivers/clocksource/Kconfig
@@ -130,6 +130,14 @@ config VT8500_TIMER
help
Enables support for the VT8500 driver.
+config NPCM7XX_TIMER
+ bool "NPCM7xx timer driver" if COMPILE_TEST
+ depends on HAS_IOMEM
+ select CLKSRC_MMIO
+ help
+ Enable 24-bit TIMER0 and TIMER1 counters in the NPCM7xx architecture,
+ While TIMER0 serves as clockevent and TIMER1 serves as clocksource.
+
config CADENCE_TTC_TIMER
bool "Cadence TTC timer driver" if COMPILE_TEST
depends on COMMON_CLK
diff --git a/drivers/clocksource/Makefile b/drivers/clocksource/Makefile
index d6dec4489d66..74387877f7cf 100644
--- a/drivers/clocksource/Makefile
+++ b/drivers/clocksource/Makefile
@@ -55,6 +55,7 @@ obj-$(CONFIG_CLKSRC_NPS) += timer-nps.o
obj-$(CONFIG_OXNAS_RPS_TIMER) += timer-oxnas-rps.o
obj-$(CONFIG_OWL_TIMER) += owl-timer.o
obj-$(CONFIG_SPRD_TIMER) += timer-sprd.o
+obj-$(CONFIG_NPCM7XX_TIMER) += timer-npcm7xx.o
obj-$(CONFIG_ARC_TIMERS) += arc_timer.o
obj-$(CONFIG_ARM_ARCH_TIMER) += arm_arch_timer.o
diff --git a/drivers/clocksource/timer-npcm7xx.c b/drivers/clocksource/timer-npcm7xx.c
new file mode 100644
index 000000000000..f98d912bd259
--- /dev/null
+++ b/drivers/clocksource/timer-npcm7xx.c
@@ -0,0 +1,215 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2014-2018 Nuvoton Technologies tomer.maimon@nuvoton.com
+ * All rights reserved.
+ *
+ * Copyright 2017 Google, Inc.
+ */
+
+#include <linux/kernel.h>
+#include <linux/sched.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/err.h>
+#include <linux/clk.h>
+#include <linux/io.h>
+#include <linux/clockchips.h>
+#include <linux/of_irq.h>
+#include <linux/of_address.h>
+#include "timer-of.h"
+
+/* Timers registers */
+#define NPCM7XX_REG_TCSR0 0x0 /* Timer 0 Control and Status Register */
+#define NPCM7XX_REG_TICR0 0x8 /* Timer 0 Initial Count Register */
+#define NPCM7XX_REG_TCSR1 0x4 /* Timer 1 Control and Status Register */
+#define NPCM7XX_REG_TICR1 0xc /* Timer 1 Initial Count Register */
+#define NPCM7XX_REG_TDR1 0x14 /* Timer 1 Data Register */
+#define NPCM7XX_REG_TISR 0x18 /* Timer Interrupt Status Register */
+
+/* Timers control */
+#define NPCM7XX_Tx_RESETINT 0x1f
+#define NPCM7XX_Tx_PERIOD BIT(27)
+#define NPCM7XX_Tx_INTEN BIT(29)
+#define NPCM7XX_Tx_COUNTEN BIT(30)
+#define NPCM7XX_Tx_ONESHOT 0x0
+#define NPCM7XX_Tx_OPER GENMASK(3, 27)
+#define NPCM7XX_Tx_MIN_PRESCALE 0x1
+#define NPCM7XX_Tx_TDR_MASK_BITS 24
+#define NPCM7XX_Tx_MAX_CNT 0xFFFFFF
+#define NPCM7XX_T0_CLR_INT 0x1
+#define NPCM7XX_Tx_CLR_CSR 0x0
+
+/* Timers operating mode */
+#define NPCM7XX_START_PERIODIC_Tx (NPCM7XX_Tx_PERIOD | NPCM7XX_Tx_COUNTEN | \
+ NPCM7XX_Tx_INTEN | \
+ NPCM7XX_Tx_MIN_PRESCALE)
+
+#define NPCM7XX_START_ONESHOT_Tx (NPCM7XX_Tx_ONESHOT | NPCM7XX_Tx_COUNTEN | \
+ NPCM7XX_Tx_INTEN | \
+ NPCM7XX_Tx_MIN_PRESCALE)
+
+#define NPCM7XX_START_Tx (NPCM7XX_Tx_COUNTEN | NPCM7XX_Tx_PERIOD | \
+ NPCM7XX_Tx_MIN_PRESCALE)
+
+#define NPCM7XX_DEFAULT_CSR (NPCM7XX_Tx_CLR_CSR | NPCM7XX_Tx_MIN_PRESCALE)
+
+static int npcm7xx_timer_resume(struct clock_event_device *evt)
+{
+ struct timer_of *to = to_timer_of(evt);
+ u32 val;
+
+ val = readl(timer_of_base(to) + NPCM7XX_REG_TCSR0);
+ val |= NPCM7XX_Tx_COUNTEN;
+ writel(val, timer_of_base(to) + NPCM7XX_REG_TCSR0);
+
+ return 0;
+}
+
+static int npcm7xx_timer_shutdown(struct clock_event_device *evt)
+{
+ struct timer_of *to = to_timer_of(evt);
+ u32 val;
+
+ val = readl(timer_of_base(to) + NPCM7XX_REG_TCSR0);
+ val &= ~NPCM7XX_Tx_COUNTEN;
+ writel(val, timer_of_base(to) + NPCM7XX_REG_TCSR0);
+
+ return 0;
+}
+
+static int npcm7xx_timer_oneshot(struct clock_event_device *evt)
+{
+ struct timer_of *to = to_timer_of(evt);
+ u32 val;
+
+ val = readl(timer_of_base(to) + NPCM7XX_REG_TCSR0);
+ val &= ~NPCM7XX_Tx_OPER;
+
+ val = readl(timer_of_base(to) + NPCM7XX_REG_TCSR0);
+ val |= NPCM7XX_START_ONESHOT_Tx;
+ writel(val, timer_of_base(to) + NPCM7XX_REG_TCSR0);
+
+ return 0;
+}
+
+static int npcm7xx_timer_periodic(struct clock_event_device *evt)
+{
+ struct timer_of *to = to_timer_of(evt);
+ u32 val;
+
+ val = readl(timer_of_base(to) + NPCM7XX_REG_TCSR0);
+ val &= ~NPCM7XX_Tx_OPER;
+
+ writel(timer_of_period(to), timer_of_base(to) + NPCM7XX_REG_TICR0);
+ val |= NPCM7XX_START_PERIODIC_Tx;
+
+ writel(val, timer_of_base(to) + NPCM7XX_REG_TCSR0);
+
+ return 0;
+}
+
+static int npcm7xx_clockevent_set_next_event(unsigned long evt,
+ struct clock_event_device *clk)
+{
+ struct timer_of *to = to_timer_of(clk);
+ u32 val;
+
+ writel(evt, timer_of_base(to) + NPCM7XX_REG_TICR0);
+ val = readl(timer_of_base(to) + NPCM7XX_REG_TCSR0);
+ val |= NPCM7XX_START_Tx;
+ writel(val, timer_of_base(to) + NPCM7XX_REG_TCSR0);
+
+ return 0;
+}
+
+static irqreturn_t npcm7xx_timer0_interrupt(int irq, void *dev_id)
+{
+ struct clock_event_device *evt = (struct clock_event_device *)dev_id;
+ struct timer_of *to = to_timer_of(evt);
+
+ writel(NPCM7XX_T0_CLR_INT, timer_of_base(to) + NPCM7XX_REG_TISR);
+
+ evt->event_handler(evt);
+
+ return IRQ_HANDLED;
+}
+
+static struct timer_of npcm7xx_to = {
+ .flags = TIMER_OF_IRQ | TIMER_OF_BASE | TIMER_OF_CLOCK,
+
+ .clkevt = {
+ .name = "npcm7xx-timer0",
+ .features = CLOCK_EVT_FEAT_PERIODIC |
+ CLOCK_EVT_FEAT_ONESHOT,
+ .set_next_event = npcm7xx_clockevent_set_next_event,
+ .set_state_shutdown = npcm7xx_timer_shutdown,
+ .set_state_periodic = npcm7xx_timer_periodic,
+ .set_state_oneshot = npcm7xx_timer_oneshot,
+ .tick_resume = npcm7xx_timer_resume,
+ .rating = 300,
+ },
+
+ .of_irq = {
+ .handler = npcm7xx_timer0_interrupt,
+ .flags = IRQF_TIMER | IRQF_IRQPOLL,
+ },
+};
+
+static void __init npcm7xx_clockevents_init(void)
+{
+ writel(NPCM7XX_DEFAULT_CSR,
+ timer_of_base(&npcm7xx_to) + NPCM7XX_REG_TCSR0);
+
+ writel(NPCM7XX_Tx_RESETINT,
+ timer_of_base(&npcm7xx_to) + NPCM7XX_REG_TISR);
+
+ npcm7xx_to.clkevt.cpumask = cpumask_of(0);
+ clockevents_config_and_register(&npcm7xx_to.clkevt,
+ timer_of_rate(&npcm7xx_to),
+ 0x1, NPCM7XX_Tx_MAX_CNT);
+}
+
+static void __init npcm7xx_clocksource_init(void)
+{
+ u32 val;
+
+ writel(NPCM7XX_DEFAULT_CSR,
+ timer_of_base(&npcm7xx_to) + NPCM7XX_REG_TCSR1);
+ writel(NPCM7XX_Tx_MAX_CNT,
+ timer_of_base(&npcm7xx_to) + NPCM7XX_REG_TICR1);
+
+ val = readl(timer_of_base(&npcm7xx_to) + NPCM7XX_REG_TCSR1);
+ val |= NPCM7XX_START_Tx;
+ writel(val, timer_of_base(&npcm7xx_to) + NPCM7XX_REG_TCSR1);
+
+ clocksource_mmio_init(timer_of_base(&npcm7xx_to) +
+ NPCM7XX_REG_TDR1,
+ "npcm7xx-timer1", timer_of_rate(&npcm7xx_to),
+ 200, (unsigned int)NPCM7XX_Tx_TDR_MASK_BITS,
+ clocksource_mmio_readl_down);
+}
+
+static int __init npcm7xx_timer_init(struct device_node *np)
+{
+ int ret;
+
+ ret = timer_of_init(np, &npcm7xx_to);
+ if (ret)
+ return ret;
+
+ /* Clock input is divided by PRESCALE + 1 before it is fed */
+ /* to the counter */
+ npcm7xx_to.of_clk.rate = npcm7xx_to.of_clk.rate /
+ (NPCM7XX_Tx_MIN_PRESCALE + 1);
+
+ npcm7xx_clocksource_init();
+ npcm7xx_clockevents_init();
+
+ pr_info("Enabling NPCM7xx clocksource timer base: 0x%x, IRQ: %d ",
+ (int)timer_of_base(&npcm7xx_to), timer_of_irq(&npcm7xx_to));
+
+ return 0;
+}
+
+TIMER_OF_DECLARE(npcm7xx, "nuvoton,npcm750-timer", npcm7xx_timer_init);
+
--
2.14.1
next prev parent reply other threads:[~2018-03-08 15:25 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-03-08 15:24 [PATCH v5 0/2] clocksource/drivers/npcm: Add NPCM7xx timer driver Tomer Maimon
2018-03-08 15:24 ` [PATCH v5 1/2] dt-binding: timer: document NPCM7xx timer DT bindings Tomer Maimon
2018-03-08 15:24 ` Tomer Maimon [this message]
2018-03-08 15:33 ` [PATCH v5 2/2] clocksource/drivers/npcm: Add NPCM7xx timer driver Daniel Lezcano
2018-03-08 22:37 ` Tomer Maimon
2018-03-09 13:25 ` Daniel Lezcano
2018-03-09 13:25 ` [PATCH v5 0/2] " Daniel Lezcano
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1520522698-16153-3-git-send-email-tmaimon77@gmail.com \
--to=tmaimon77@gmail.com \
--cc=avifishman70@gmail.com \
--cc=brendanhiggins@google.com \
--cc=daniel.lezcano@linaro.org \
--cc=devicetree@vger.kernel.org \
--cc=joel@jms.id.au \
--cc=linux-kernel@vger.kernel.org \
--cc=mark.rutland@arm.com \
--cc=openbmc@lists.ozlabs.org \
--cc=robh+dt@kernel.org \
--cc=tglx@linutronix.de \
--cc=venture@google.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.