From: <gregkh@linuxfoundation.org>
To: jeffy.chen@rock-chips.com, alexander.levin@microsoft.com,
gregkh@linuxfoundation.org, seanpaul@chromium.org
Cc: <stable@vger.kernel.org>, <stable-commits@vger.kernel.org>
Subject: Patch "drm/rockchip: vop: Enable pm domain before vop_initial" has been added to the 4.9-stable tree
Date: Sun, 18 Mar 2018 17:00:33 +0100 [thread overview]
Message-ID: <15213888336926@kroah.com> (raw)
This is a note to let you know that I've just added the patch titled
drm/rockchip: vop: Enable pm domain before vop_initial
to the 4.9-stable tree which can be found at:
http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=summary
The filename of the patch is:
drm-rockchip-vop-enable-pm-domain-before-vop_initial.patch
and it can be found in the queue-4.9 subdirectory.
If you, or anyone else, feels it should not be added to the stable tree,
please let <stable@vger.kernel.org> know about it.
>From foo@baz Sun Mar 18 16:55:33 CET 2018
From: Jeffy Chen <jeffy.chen@rock-chips.com>
Date: Thu, 6 Apr 2017 20:31:20 +0800
Subject: drm/rockchip: vop: Enable pm domain before vop_initial
From: Jeffy Chen <jeffy.chen@rock-chips.com>
[ Upstream commit 5e570373c015b60a68828b1cd9d475cb33d3be4b ]
We're trying to access vop registers here, so need to make sure
the pm domain is on.
Normally it should be enabled by the bootloader, but there's no
guarantee of it. And if we wanna do unbind/bind, it would also
cause the device to hang.
And this patch also does these:
1/ move vop_initial to the end of vop_bind for eaiser error handling.
2/ correct the err_put_pm_runtime of vop_enable.
Signed-off-by: Jeffy Chen <jeffy.chen@rock-chips.com>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: http://patchwork.freedesktop.org/patch/msgid/1491481885-13775-8-git-send-email-jeffy.chen@rock-chips.com
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/gpu/drm/rockchip/rockchip_drm_vop.c | 29 ++++++++++++++++++++--------
1 file changed, 21 insertions(+), 8 deletions(-)
--- a/drivers/gpu/drm/rockchip/rockchip_drm_vop.c
+++ b/drivers/gpu/drm/rockchip/rockchip_drm_vop.c
@@ -503,7 +503,7 @@ static int vop_enable(struct drm_crtc *c
ret = pm_runtime_get_sync(vop->dev);
if (ret < 0) {
dev_err(vop->dev, "failed to get pm runtime: %d\n", ret);
- goto err_put_pm_runtime;
+ return ret;
}
ret = clk_enable(vop->hclk);
@@ -1348,10 +1348,16 @@ static int vop_initial(struct vop *vop)
return PTR_ERR(vop->dclk);
}
+ ret = pm_runtime_get_sync(vop->dev);
+ if (ret < 0) {
+ dev_err(vop->dev, "failed to get pm runtime: %d\n", ret);
+ return ret;
+ }
+
ret = clk_prepare(vop->dclk);
if (ret < 0) {
dev_err(vop->dev, "failed to prepare dclk\n");
- return ret;
+ goto err_put_pm_runtime;
}
/* Enable both the hclk and aclk to setup the vop */
@@ -1411,6 +1417,8 @@ static int vop_initial(struct vop *vop)
vop->is_enabled = false;
+ pm_runtime_put_sync(vop->dev);
+
return 0;
err_disable_aclk:
@@ -1419,6 +1427,8 @@ err_disable_hclk:
clk_disable_unprepare(vop->hclk);
err_unprepare_dclk:
clk_unprepare(vop->dclk);
+err_put_pm_runtime:
+ pm_runtime_put_sync(vop->dev);
return ret;
}
@@ -1519,12 +1529,6 @@ static int vop_bind(struct device *dev,
if (!vop->regsbak)
return -ENOMEM;
- ret = vop_initial(vop);
- if (ret < 0) {
- dev_err(&pdev->dev, "cannot initial vop dev - err %d\n", ret);
- return ret;
- }
-
irq = platform_get_irq(pdev, 0);
if (irq < 0) {
dev_err(dev, "cannot find irq for vop\n");
@@ -1551,8 +1555,17 @@ static int vop_bind(struct device *dev,
pm_runtime_enable(&pdev->dev);
+ ret = vop_initial(vop);
+ if (ret < 0) {
+ dev_err(&pdev->dev, "cannot initial vop dev - err %d\n", ret);
+ goto err_disable_pm_runtime;
+ }
+
return 0;
+err_disable_pm_runtime:
+ pm_runtime_disable(&pdev->dev);
+ vop_destroy_crtc(vop);
err_enable_irq:
enable_irq(vop->irq); /* To balance out the disable_irq above */
return ret;
Patches currently in stable-queue which might be from jeffy.chen@rock-chips.com are
queue-4.9/drm-rockchip-vop-enable-pm-domain-before-vop_initial.patch
reply other threads:[~2018-03-18 16:01 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=15213888336926@kroah.com \
--to=gregkh@linuxfoundation.org \
--cc=alexander.levin@microsoft.com \
--cc=jeffy.chen@rock-chips.com \
--cc=seanpaul@chromium.org \
--cc=stable-commits@vger.kernel.org \
--cc=stable@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.