From: <gregkh@linuxfoundation.org>
To: shuahkh@osg.samsung.com, alexander.levin@microsoft.com,
gregkh@linuxfoundation.org, mchehab@s-opensource.com,
s.nawrocki@samsung.com
Cc: <stable@vger.kernel.org>, <stable-commits@vger.kernel.org>
Subject: Patch "media: s5p-mfc: Fix lock contention - request_firmware() once" has been added to the 4.14-stable tree
Date: Thu, 22 Mar 2018 14:30:36 +0100 [thread overview]
Message-ID: <1521725436206135@kroah.com> (raw)
This is a note to let you know that I've just added the patch titled
media: s5p-mfc: Fix lock contention - request_firmware() once
to the 4.14-stable tree which can be found at:
http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=summary
The filename of the patch is:
media-s5p-mfc-fix-lock-contention-request_firmware-once.patch
and it can be found in the queue-4.14 subdirectory.
If you, or anyone else, feels it should not be added to the stable tree,
please let <stable@vger.kernel.org> know about it.
>From foo@baz Thu Mar 22 14:26:48 CET 2018
From: Shuah Khan <shuahkh@osg.samsung.com>
Date: Fri, 3 Nov 2017 22:01:58 -0400
Subject: media: s5p-mfc: Fix lock contention - request_firmware() once
From: Shuah Khan <shuahkh@osg.samsung.com>
[ Upstream commit f45ce9877561044090010e0eb0fad644232ded04 ]
Driver calls request_firmware() whenever the device is opened for the
first time. As the device gets opened and closed, dev->num_inst == 1
is true several times. This is not necessary since the firmware is saved
in the fw_buf. s5p_mfc_load_firmware() copies the buffer returned by
the request_firmware() to dev->fw_buf.
fw_buf sticks around until it gets released from s5p_mfc_remove(), hence
there is no need to keep requesting firmware and copying it to fw_buf.
This might have been overlooked when changes are made to free fw_buf from
the device release interface s5p_mfc_release().
Fix s5p_mfc_load_firmware() to call request_firmware() once and keep state.
Change _probe() to load firmware once fw_buf has been allocated.
s5p_mfc_open() and it continues to call s5p_mfc_load_firmware() and init
hardware which is the step where firmware is written to the device.
This addresses the mfc_mutex contention due to repeated request_firmware()
calls from open() in the following circular locking warning:
[ 552.194115] qtdemux0:sink/2710 is trying to acquire lock:
[ 552.199488] (&dev->mfc_mutex){+.+.}, at: [<bf145544>] s5p_mfc_mmap+0x28/0xd4 [s5p_mfc]
[ 552.207459]
but task is already holding lock:
[ 552.213264] (&mm->mmap_sem){++++}, at: [<c01df2e4>] vm_mmap_pgoff+0x44/0xb8
[ 552.220284]
which lock already depends on the new lock.
[ 552.228429]
the existing dependency chain (in reverse order) is:
[ 552.235881]
-> #2 (&mm->mmap_sem){++++}:
[ 552.241259] __might_fault+0x80/0xb0
[ 552.245331] filldir64+0xc0/0x2f8
[ 552.249144] call_filldir+0xb0/0x14c
[ 552.253214] ext4_readdir+0x768/0x90c
[ 552.257374] iterate_dir+0x74/0x168
[ 552.261360] SyS_getdents64+0x7c/0x1a0
[ 552.265608] ret_fast_syscall+0x0/0x28
[ 552.269850]
-> #1 (&type->i_mutex_dir_key#2){++++}:
[ 552.276180] down_read+0x48/0x90
[ 552.279904] lookup_slow+0x74/0x178
[ 552.283889] walk_component+0x1a4/0x2e4
[ 552.288222] link_path_walk+0x174/0x4a0
[ 552.292555] path_openat+0x68/0x944
[ 552.296541] do_filp_open+0x60/0xc4
[ 552.300528] file_open_name+0xe4/0x114
[ 552.304772] filp_open+0x28/0x48
[ 552.308499] kernel_read_file_from_path+0x30/0x78
[ 552.313700] _request_firmware+0x3ec/0x78c
[ 552.318291] request_firmware+0x3c/0x54
[ 552.322642] s5p_mfc_load_firmware+0x54/0x150 [s5p_mfc]
[ 552.328358] s5p_mfc_open+0x4e4/0x550 [s5p_mfc]
[ 552.333394] v4l2_open+0xa0/0x104 [videodev]
[ 552.338137] chrdev_open+0xa4/0x18c
[ 552.342121] do_dentry_open+0x208/0x310
[ 552.346454] path_openat+0x28c/0x944
[ 552.350526] do_filp_open+0x60/0xc4
[ 552.354512] do_sys_open+0x118/0x1c8
[ 552.358586] ret_fast_syscall+0x0/0x28
[ 552.362830]
-> #0 (&dev->mfc_mutex){+.+.}:
-> #0 (&dev->mfc_mutex){+.+.}:
[ 552.368379] lock_acquire+0x6c/0x88
[ 552.372364] __mutex_lock+0x68/0xa34
[ 552.376437] mutex_lock_interruptible_nested+0x1c/0x24
[ 552.382086] s5p_mfc_mmap+0x28/0xd4 [s5p_mfc]
[ 552.386939] v4l2_mmap+0x54/0x88 [videodev]
[ 552.391601] mmap_region+0x3a8/0x638
[ 552.395673] do_mmap+0x330/0x3a4
[ 552.399400] vm_mmap_pgoff+0x90/0xb8
[ 552.403472] SyS_mmap_pgoff+0x90/0xc0
[ 552.407632] ret_fast_syscall+0x0/0x28
[ 552.411876]
other info that might help us debug this:
[ 552.419848] Chain exists of:
&dev->mfc_mutex --> &type->i_mutex_dir_key#2 --> &mm->mmap_sem
[ 552.431200] Possible unsafe locking scenario:
[ 552.437092] CPU0 CPU1
[ 552.441598] ---- ----
[ 552.446104] lock(&mm->mmap_sem);
[ 552.449484] lock(&type->i_mutex_dir_key#2);
[ 552.456329] lock(&mm->mmap_sem);
[ 552.462222] lock(&dev->mfc_mutex);
[ 552.465775]
*** DEADLOCK ***
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/media/platform/s5p-mfc/s5p_mfc.c | 6 ++++++
drivers/media/platform/s5p-mfc/s5p_mfc_common.h | 3 +++
drivers/media/platform/s5p-mfc/s5p_mfc_ctrl.c | 5 +++++
3 files changed, 14 insertions(+)
--- a/drivers/media/platform/s5p-mfc/s5p_mfc.c
+++ b/drivers/media/platform/s5p-mfc/s5p_mfc.c
@@ -1315,6 +1315,12 @@ static int s5p_mfc_probe(struct platform
goto err_dma;
}
+ /*
+ * Load fails if fs isn't mounted. Try loading anyway.
+ * _open() will load it, it it fails now. Ignore failure.
+ */
+ s5p_mfc_load_firmware(dev);
+
mutex_init(&dev->mfc_mutex);
init_waitqueue_head(&dev->queue);
dev->hw_lock = 0;
--- a/drivers/media/platform/s5p-mfc/s5p_mfc_common.h
+++ b/drivers/media/platform/s5p-mfc/s5p_mfc_common.h
@@ -290,6 +290,8 @@ struct s5p_mfc_priv_buf {
* @mfc_cmds: cmd structure holding HW commands function pointers
* @mfc_regs: structure holding MFC registers
* @fw_ver: loaded firmware sub-version
+ * @fw_get_done flag set when request_firmware() is complete and
+ * copied into fw_buf
* risc_on: flag indicates RISC is on or off
*
*/
@@ -336,6 +338,7 @@ struct s5p_mfc_dev {
struct s5p_mfc_hw_cmds *mfc_cmds;
const struct s5p_mfc_regs *mfc_regs;
enum s5p_mfc_fw_ver fw_ver;
+ bool fw_get_done;
bool risc_on; /* indicates if RISC is on or off */
};
--- a/drivers/media/platform/s5p-mfc/s5p_mfc_ctrl.c
+++ b/drivers/media/platform/s5p-mfc/s5p_mfc_ctrl.c
@@ -55,6 +55,9 @@ int s5p_mfc_load_firmware(struct s5p_mfc
* into kernel. */
mfc_debug_enter();
+ if (dev->fw_get_done)
+ return 0;
+
for (i = MFC_FW_MAX_VERSIONS - 1; i >= 0; i--) {
if (!dev->variant->fw_name[i])
continue;
@@ -82,6 +85,7 @@ int s5p_mfc_load_firmware(struct s5p_mfc
}
memcpy(dev->fw_buf.virt, fw_blob->data, fw_blob->size);
wmb();
+ dev->fw_get_done = true;
release_firmware(fw_blob);
mfc_debug_leave();
return 0;
@@ -93,6 +97,7 @@ int s5p_mfc_release_firmware(struct s5p_
/* Before calling this function one has to make sure
* that MFC is no longer processing */
s5p_mfc_release_priv_buf(dev, &dev->fw_buf);
+ dev->fw_get_done = false;
return 0;
}
Patches currently in stable-queue which might be from shuahkh@osg.samsung.com are
queue-4.14/media-s5p-mfc-fix-lock-contention-request_firmware-once.patch
reply other threads:[~2018-03-22 13:30 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1521725436206135@kroah.com \
--to=gregkh@linuxfoundation.org \
--cc=alexander.levin@microsoft.com \
--cc=mchehab@s-opensource.com \
--cc=s.nawrocki@samsung.com \
--cc=shuahkh@osg.samsung.com \
--cc=stable-commits@vger.kernel.org \
--cc=stable@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.