Patch "iio: st_pressure: st_accel: Initialise sensor platform data properly" has been added to the 4.9-stable tree

[<gregkh@linuxfoundation.org>]

This is a note to let you know that I've just added the patch titled

    iio: st_pressure: st_accel: Initialise sensor platform data properly

to the 4.9-stable tree which can be found at:
    http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=summary

The filename of the patch is:
     iio-st_pressure-st_accel-initialise-sensor-platform-data-properly.patch
and it can be found in the queue-4.9 subdirectory.

If you, or anyone else, feels it should not be added to the stable tree,
please let <stable@vger.kernel.org> know about it.


>From foo@baz Thu Mar 22 14:40:23 CET 2018
From: Shrirang Bagul <shrirang.bagul@canonical.com>
Date: Wed, 19 Apr 2017 22:05:00 +0800
Subject: iio: st_pressure: st_accel: Initialise sensor platform data properly

From: Shrirang Bagul <shrirang.bagul@canonical.com>


[ Upstream commit 7383d44b84c94aaca4bf695a6bd8a69f2295ef1a ]

This patch fixes the sensor platform data initialisation for st_pressure
and st_accel device drivers. Without this patch, the driver fails to
register the sensors when the user removes and re-loads the driver.

1. Unload the kernel modules for st_pressure
$ sudo rmmod st_pressure_i2c
$ sudo rmmod st_pressure

2. Re-load the driver
$ sudo insmod st_pressure
$ sudo insmod st_pressure_i2c

Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/iio/accel/st_accel_core.c       |    7 ++++---
 drivers/iio/pressure/st_pressure_core.c |    8 ++++----
 2 files changed, 8 insertions(+), 7 deletions(-)

--- a/drivers/iio/accel/st_accel_core.c
+++ b/drivers/iio/accel/st_accel_core.c
@@ -827,6 +827,8 @@ static const struct iio_trigger_ops st_a
 int st_accel_common_probe(struct iio_dev *indio_dev)
 {
 	struct st_sensor_data *adata = iio_priv(indio_dev);
+	struct st_sensors_platform_data *pdata =
+		(struct st_sensors_platform_data *)adata->dev->platform_data;
 	int irq = adata->get_irq_data_ready(indio_dev);
 	int err;
 
@@ -853,9 +855,8 @@ int st_accel_common_probe(struct iio_dev
 					&adata->sensor_settings->fs.fs_avl[0];
 	adata->odr = adata->sensor_settings->odr.odr_avl[0].hz;
 
-	if (!adata->dev->platform_data)
-		adata->dev->platform_data =
-			(struct st_sensors_platform_data *)&default_accel_pdata;
+	if (!pdata)
+		pdata = (struct st_sensors_platform_data *)&default_accel_pdata;
 
 	err = st_sensors_init_sensor(indio_dev, adata->dev->platform_data);
 	if (err < 0)
--- a/drivers/iio/pressure/st_pressure_core.c
+++ b/drivers/iio/pressure/st_pressure_core.c
@@ -638,6 +638,8 @@ static const struct iio_trigger_ops st_p
 int st_press_common_probe(struct iio_dev *indio_dev)
 {
 	struct st_sensor_data *press_data = iio_priv(indio_dev);
+	struct st_sensors_platform_data *pdata =
+		(struct st_sensors_platform_data *)press_data->dev->platform_data;
 	int irq = press_data->get_irq_data_ready(indio_dev);
 	int err;
 
@@ -673,10 +675,8 @@ int st_press_common_probe(struct iio_dev
 	press_data->odr = press_data->sensor_settings->odr.odr_avl[0].hz;
 
 	/* Some devices don't support a data ready pin. */
-	if (!press_data->dev->platform_data &&
-				press_data->sensor_settings->drdy_irq.addr)
-		press_data->dev->platform_data =
-			(struct st_sensors_platform_data *)&default_press_pdata;
+	if (!pdata && press_data->sensor_settings->drdy_irq.addr)
+		pdata =	(struct st_sensors_platform_data *)&default_press_pdata;
 
 	err = st_sensors_init_sensor(indio_dev, press_data->dev->platform_data);
 	if (err < 0)


Patches currently in stable-queue which might be from shrirang.bagul@canonical.com are

queue-4.9/iio-st_pressure-st_accel-initialise-sensor-platform-data-properly.patch