From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: from out5-smtp.messagingengine.com ([66.111.4.29]:50213 "EHLO out5-smtp.messagingengine.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1752253AbeCXQrl (ORCPT ); Sat, 24 Mar 2018 12:47:41 -0400 Subject: FAILED: patch "[PATCH] MIPS: ralink: Fix booting on MT7621" failed to apply to 4.9-stable tree To: neil@brown.name, jhogan@kernel.org, john@phrozen.org, matt.redfearn@mips.com, ralf@linux-mips.org, stable@vger.kernel.org Cc: From: Date: Sat, 24 Mar 2018 17:47:39 +0100 Message-ID: <152191005910250@kroah.com> MIME-Version: 1.0 Content-Type: text/plain; charset=ANSI_X3.4-1968 Content-Transfer-Encoding: 8bit Sender: stable-owner@vger.kernel.org List-ID: The patch below does not apply to the 4.9-stable tree. If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to . thanks, greg k-h ------------------ original commit in Linus's tree ------------------ >>From a63d706ea719190a79a6c769e898f70680044d3e Mon Sep 17 00:00:00 2001 From: NeilBrown Date: Wed, 21 Mar 2018 14:02:10 +1100 Subject: [PATCH] MIPS: ralink: Fix booting on MT7621 Since commit 3af5a67c86a3 ("MIPS: Fix early CM probing") the MT7621 has not been able to boot. This commit caused mips_cm_probe() to be called before mt7621.c::proc_soc_init(). prom_soc_init() has a comment explaining that mips_cm_probe() "wipes out the bootloader config" and means that configuration registers are no longer available. It has some code to re-enable this config. Before this re-enable code is run, the sysc register cannot be read, so when SYSC_REG_CHIP_NAME0 is read, a garbage value is returned and panic() is called. If we move the config-repair code to the top of prom_soc_init(), the registers can be read and boot can proceed. Very occasionally, the first register read after the reconfiguration returns garbage, so add a call to __sync(). Fixes: 3af5a67c86a3 ("MIPS: Fix early CM probing") Signed-off-by: NeilBrown Reviewed-by: Matt Redfearn Cc: John Crispin Cc: Ralf Baechle Cc: linux-mips@linux-mips.org Cc: # 4.5+ Patchwork: https://patchwork.linux-mips.org/patch/18859/ Signed-off-by: James Hogan diff --git a/arch/mips/ralink/mt7621.c b/arch/mips/ralink/mt7621.c index 1b274742077d..d2718de60b9b 100644 --- a/arch/mips/ralink/mt7621.c +++ b/arch/mips/ralink/mt7621.c @@ -170,6 +170,28 @@ void prom_soc_init(struct ralink_soc_info *soc_info) u32 n1; u32 rev; + /* Early detection of CMP support */ + mips_cm_probe(); + mips_cpc_probe(); + + if (mips_cps_numiocu(0)) { + /* + * mips_cm_probe() wipes out bootloader + * config for CM regions and we have to configure them + * again. This SoC cannot talk to pamlbus devices + * witout proper iocu region set up. + * + * FIXME: it would be better to do this with values + * from DT, but we need this very early because + * without this we cannot talk to pretty much anything + * including serial. + */ + write_gcr_reg0_base(MT7621_PALMBUS_BASE); + write_gcr_reg0_mask(~MT7621_PALMBUS_SIZE | + CM_GCR_REGn_MASK_CMTGT_IOCU0); + __sync(); + } + n0 = __raw_readl(sysc + SYSC_REG_CHIP_NAME0); n1 = __raw_readl(sysc + SYSC_REG_CHIP_NAME1); @@ -194,26 +216,6 @@ void prom_soc_init(struct ralink_soc_info *soc_info) rt2880_pinmux_data = mt7621_pinmux_data; - /* Early detection of CMP support */ - mips_cm_probe(); - mips_cpc_probe(); - - if (mips_cps_numiocu(0)) { - /* - * mips_cm_probe() wipes out bootloader - * config for CM regions and we have to configure them - * again. This SoC cannot talk to pamlbus devices - * witout proper iocu region set up. - * - * FIXME: it would be better to do this with values - * from DT, but we need this very early because - * without this we cannot talk to pretty much anything - * including serial. - */ - write_gcr_reg0_base(MT7621_PALMBUS_BASE); - write_gcr_reg0_mask(~MT7621_PALMBUS_SIZE | - CM_GCR_REGn_MASK_CMTGT_IOCU0); - } if (!register_cps_smp_ops()) return;