Re: [PATCH v3 00/14] Enable SD/MMC on JZ4780 SoCs

[Ezequiel Garcia <ezequiel@collabora.com>]

Hi Ulf,

On Wed, 2018-03-21 at 16:27 -0300, Ezequiel Garcia wrote:
> From: Ezequiel Garcia <ezequiel@collabora.co.uk>
> 
> This patchset adds support for SD/MMC on JZ4780 based
> platforms, such as the MIPS Creator CI20 board.
> 
> Most of the work has been done by Alex, Paul and Zubair,
> while I've only prepared the upstream submission, cleaned
> some patches, and written some commit logs where needed.
> 
> All praises should go to them, all rants to me.
> 
> The series is based on v4.16-rc4.
> 
> Changes from v2:
>   * Fix commit log in "mmc: dt-bindings: add MMC support to JZ4740
> SoC"
> 
> Changes from v1:
>   * Reordered patches, fixes first, for easier backporting.
>   * Added Link and Fixes tags to patch "Fix race condition",
>     for easier backporting.
>   * Enabled the DMA in the dtsi for jz4780, dropped it from the ci20
> dts.
>   * Reworded config and help user visible text.
>   * Reworded commit logs, using imperative.
>   * Re-authored my patches, as Collabora is partially
>     sponsoring them.
> 
> 
> Alex Smith (3):
>   mmc: jz4740: Fix race condition in IRQ mask update
>   mmc: jz4740: Set clock rate to mmc->f_max rather than
> JZ_MMC_CLK_RATE
>   mmc: jz4740: Add support for the JZ4780
> 
> Ezequiel Garcia (9):
>   mmc: jz4780: Order headers alphabetically
>   mmc: jz4740: Use dev_get_platdata
>   mmc: jz4740: Introduce devicetree probe
>   mmc: dt-bindings: add MMC support to JZ4740 SoC
>   mmc: jz4740: Use dma_request_chan()
>   MIPS: dts: jz4780: Add DMA controller node to the devicetree
>   MIPS: dts: jz4780: Add MMC controller node to the devicetree
>   MIPS: dts: ci20: Enable MMC in the devicetree
>   MIPS: configs: ci20: Enable DMA and MMC support
> 
> Paul Cercueil (1):
>   mmc: jz4740: Fix error exit path in driver's probe
> 
> Zubair Lutfullah Kakakhel (1):
>   mmc: jz4740: Reset the device requesting the interrupt
> 
>  Documentation/devicetree/bindings/mmc/jz4740.txt |  38 ++++
>  arch/mips/boot/dts/ingenic/ci20.dts              |  34 ++++
>  arch/mips/boot/dts/ingenic/jz4780.dtsi           |  52 +++++
>  arch/mips/configs/ci20_defconfig                 |   3 +
>  drivers/mmc/host/Kconfig                         |   9 +-
>  drivers/mmc/host/jz4740_mmc.c                    | 230
> ++++++++++++++++-------
>  include/dt-bindings/dma/jz4780-dma.h             |  49 +++++
>  7 files changed, 345 insertions(+), 70 deletions(-)
>  create mode 100644 Documentation/devicetree/bindings/mmc/jz4740.txt
>  create mode 100644 include/dt-bindings/dma/jz4780-dma.h
> 

Any chance this gets queued for 4.17 ?

Thanks,
Eze