All of lore.kernel.org
 help / color / mirror / Atom feed
From: Oza Pawandeep <poza@codeaurora.org>
To: Bjorn Helgaas <bhelgaas@google.com>,
	Philippe Ombredanne <pombredanne@nexb.com>,
	Thomas Gleixner <tglx@linutronix.de>,
	Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
	Kate Stewart <kstewart@linuxfoundation.org>,
	linux-pci@vger.kernel.org, linux-kernel@vger.kernel.org,
	Dongdong Liu <liudongdong3@huawei.com>,
	Keith Busch <keith.busch@intel.com>, Wei Zhang <wzhang@fb.com>,
	Sinan Kaya <okaya@codeaurora.org>,
	Timur Tabi <timur@codeaurora.org>
Cc: Oza Pawandeep <poza@codeaurora.org>
Subject: [PATCH v13 6/6] PCI/DPC: Do not do recovery for hotplug enabled system
Date: Mon,  9 Apr 2018 10:41:54 -0400	[thread overview]
Message-ID: <1523284914-2037-7-git-send-email-poza@codeaurora.org> (raw)
In-Reply-To: <1523284914-2037-1-git-send-email-poza@codeaurora.org>

DPC and AER should attempt recovery in the same way, except the
cases where system is with hotplug enabled.

Signed-off-by: Oza Pawandeep <poza@codeaurora.org>

diff --git a/drivers/pci/pcie/pcie-dpc.c b/drivers/pci/pcie/pcie-dpc.c
index 8e1553b..6d9a841 100644
--- a/drivers/pci/pcie/pcie-dpc.c
+++ b/drivers/pci/pcie/pcie-dpc.c
@@ -108,8 +108,6 @@ static void dpc_wait_link_inactive(struct dpc_dev *dpc)
  */
 static pci_ers_result_t dpc_reset_link(struct pci_dev *pdev)
 {
-	struct pci_bus *parent = pdev->subordinate;
-	struct pci_dev *dev, *temp;
 	struct dpc_dev *dpc;
 	struct pcie_device *pciedev;
 	struct device *devdpc;
@@ -120,19 +118,6 @@ static pci_ers_result_t dpc_reset_link(struct pci_dev *pdev)
 	dpc = get_service_data(pciedev);
 	cap = dpc->cap_pos;
 
-	pci_lock_rescan_remove();
-	list_for_each_entry_safe_reverse(dev, temp, &parent->devices,
-					 bus_list) {
-		pci_dev_get(dev);
-		pci_dev_set_disconnected(dev, NULL);
-		if (pci_has_subordinate(dev))
-			pci_walk_bus(dev->subordinate,
-				     pci_dev_set_disconnected, NULL);
-		pci_stop_and_remove_bus_device(dev);
-		pci_dev_put(dev);
-	}
-	pci_unlock_rescan_remove();
-
 	dpc_wait_link_inactive(dpc);
 	if (dpc->rp_extensions && dpc_wait_rp_inactive(dpc))
 		return PCI_ERS_RESULT_DISCONNECT;
@@ -152,13 +137,37 @@ static pci_ers_result_t dpc_reset_link(struct pci_dev *pdev)
 	return PCI_ERS_RESULT_RECOVERED;
 }
 
+static void dpc_reset_link_remove_dev(struct pci_dev *pdev)
+{
+	struct pci_bus *parent = pdev->subordinate;
+	struct pci_dev *dev, *temp;
+
+	pci_lock_rescan_remove();
+	list_for_each_entry_safe_reverse(dev, temp, &parent->devices,
+					 bus_list) {
+		pci_dev_get(dev);
+		pci_dev_set_disconnected(dev, NULL);
+		if (pci_has_subordinate(dev))
+			pci_walk_bus(dev->subordinate,
+				     pci_dev_set_disconnected, NULL);
+		pci_stop_and_remove_bus_device(dev);
+		pci_dev_put(dev);
+	}
+	pci_unlock_rescan_remove();
+
+	dpc_reset_link(pdev);
+}
+
 static void dpc_work(struct work_struct *work)
 {
 	struct dpc_dev *dpc = container_of(work, struct dpc_dev, work);
 	struct pci_dev *pdev = dpc->dev->port;
 
 	/* From DPC point of view error is always FATAL. */
-	pcie_do_recovery(pdev, DPC_FATAL);
+	if (!pdev->is_hotplug_bridge)
+		pcie_do_recovery(pdev, DPC_FATAL);
+	else
+		dpc_reset_link_remove_dev(pdev);
 }
 static void dpc_process_rp_pio_error(struct dpc_dev *dpc)
 {
-- 
2.7.4

  parent reply	other threads:[~2018-04-09 14:41 UTC|newest]

Thread overview: 38+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-04-09 14:41 [PATCH v13 0/6] Address error and recovery for AER and DPC Oza Pawandeep
2018-04-09 14:41 ` [PATCH v13 1/6] PCI/AER: Rename error recovery to generic PCI naming Oza Pawandeep
2018-04-09 23:14   ` Keith Busch
2018-04-09 14:41 ` [PATCH v13 2/6] PCI/AER: Factor out error reporting from AER Oza Pawandeep
2018-04-09 23:15   ` Keith Busch
2018-04-10 11:36   ` kbuild test robot
2018-04-09 14:41 ` [PATCH v13 3/6] PCI/PORTDRV: Implement generic find service Oza Pawandeep
2018-04-09 23:15   ` Keith Busch
2018-04-09 14:41 ` [PATCH v13 4/6] PCI/DPC: Unify and plumb error handling into DPC Oza Pawandeep
2018-04-09 23:29   ` Keith Busch
2018-04-09 23:51     ` Sinan Kaya
2018-04-10  0:05       ` Sinan Kaya
2018-04-09 14:41 ` [PATCH v13 5/6] PCI: Unify wait for link active into generic PCI Oza Pawandeep
2018-04-09 23:25   ` Keith Busch
2018-04-12  8:40     ` poza
2018-04-09 14:41 ` Oza Pawandeep [this message]
2018-04-10 21:03   ` [PATCH v13 6/6] PCI/DPC: Do not do recovery for hotplug enabled system Bjorn Helgaas
2018-04-12  1:41     ` Sinan Kaya
2018-04-12 14:06       ` Bjorn Helgaas
2018-04-12 14:34         ` Sinan Kaya
2018-04-12 14:39           ` Keith Busch
2018-04-12 15:02             ` Keith Busch
2018-04-12 16:27               ` Sinan Kaya
2018-04-12 17:09                 ` Keith Busch
2018-04-12 17:41                   ` Sinan Kaya
2018-04-14 15:53                     ` Sinan Kaya
2018-04-16  3:17                       ` Bjorn Helgaas
2018-04-16  5:33                         ` poza
2018-04-16  5:51                           ` poza
2018-04-16 14:01                             ` Bjorn Helgaas
2018-04-16 14:46                         ` Sinan Kaya
2018-04-16 17:15                           ` poza
2018-04-16  3:16 ` [PATCH v13 0/6] Address error and recovery for AER and DPC Bjorn Helgaas
2018-04-16  3:53   ` Sinan Kaya
2018-04-16  6:03     ` poza
2018-04-16 13:27       ` Bjorn Helgaas
2018-04-16 14:12         ` poza
2018-04-16 14:30         ` Sinan Kaya

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1523284914-2037-7-git-send-email-poza@codeaurora.org \
    --to=poza@codeaurora.org \
    --cc=bhelgaas@google.com \
    --cc=gregkh@linuxfoundation.org \
    --cc=keith.busch@intel.com \
    --cc=kstewart@linuxfoundation.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-pci@vger.kernel.org \
    --cc=liudongdong3@huawei.com \
    --cc=okaya@codeaurora.org \
    --cc=pombredanne@nexb.com \
    --cc=tglx@linutronix.de \
    --cc=timur@codeaurora.org \
    --cc=wzhang@fb.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.