From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: from mail.linuxfoundation.org ([140.211.169.12]:55956 "EHLO mail.linuxfoundation.org" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1752988AbeDIT6l (ORCPT ); Mon, 9 Apr 2018 15:58:41 -0400 Subject: Patch "ath10k: add BMI parameters to fix calibration from DT/pre-cal" has been added to the 4.9-stable tree To: akolli@qti.qualcomm.com, alexander.levin@microsoft.com, gregkh@linuxfoundation.org, kvalo@qca.qualcomm.com Cc: , From: Date: Mon, 09 Apr 2018 21:57:36 +0200 Message-ID: <1523303856143156@kroah.com> MIME-Version: 1.0 Content-Type: text/plain; charset=ANSI_X3.4-1968 Content-Transfer-Encoding: 8bit Sender: stable-owner@vger.kernel.org List-ID: This is a note to let you know that I've just added the patch titled ath10k: add BMI parameters to fix calibration from DT/pre-cal to the 4.9-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=summary The filename of the patch is: ath10k-add-bmi-parameters-to-fix-calibration-from-dt-pre-cal.patch and it can be found in the queue-4.9 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let know about it. >>From foo@baz Mon Apr 9 17:09:24 CEST 2018 From: Anilkumar Kolli Date: Wed, 31 May 2017 14:21:27 +0300 Subject: ath10k: add BMI parameters to fix calibration from DT/pre-cal From: Anilkumar Kolli [ Upstream commit a9f5f287fa1d47d61dfa8b60f94831174b2ea4d0 ] QCA99X0, QCA9888, QCA9984 supports calibration data in either OTP or DT/pre-cal file. Current ath10k supports Calibration data from OTP only. If caldata is loaded from DT/pre-cal file, fetching board id and applying calibration parameters like tx power gets failed. error log: [ 15.733663] ath10k_pci 0000:01:00.0: failed to fetch board file: -2 [ 15.741474] ath10k_pci 0000:01:00.0: could not probe fw (-2) This patch adds calibration data support from DT/pre-cal file. Below parameters are used to get board id and applying calibration parameters from cal data. EEPROM[OTP] FLASH[DT/pre-cal file] Cal param 0x700 0x10000 Board id 0x10 0x8000 Tested on QCA9888 with pre-cal file. Signed-off-by: Anilkumar Kolli Signed-off-by: Kalle Valo Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman --- drivers/net/wireless/ath/ath10k/bmi.h | 2 ++ drivers/net/wireless/ath/ath10k/core.c | 16 +++++++++++++--- 2 files changed, 15 insertions(+), 3 deletions(-) --- a/drivers/net/wireless/ath/ath10k/bmi.h +++ b/drivers/net/wireless/ath/ath10k/bmi.h @@ -83,6 +83,8 @@ enum bmi_cmd_id { #define BMI_NVRAM_SEG_NAME_SZ 16 #define BMI_PARAM_GET_EEPROM_BOARD_ID 0x10 +#define BMI_PARAM_GET_FLASH_BOARD_ID 0x8000 +#define BMI_PARAM_FLASH_SECTION_ALL 0x10000 #define ATH10K_BMI_BOARD_ID_FROM_OTP_MASK 0x7c00 #define ATH10K_BMI_BOARD_ID_FROM_OTP_LSB 10 --- a/drivers/net/wireless/ath/ath10k/core.c +++ b/drivers/net/wireless/ath/ath10k/core.c @@ -652,7 +652,7 @@ static int ath10k_core_get_board_id_from { u32 result, address; u8 board_id, chip_id; - int ret; + int ret, bmi_board_id_param; address = ar->hw_params.patch_load_addr; @@ -676,8 +676,13 @@ static int ath10k_core_get_board_id_from return ret; } - ret = ath10k_bmi_execute(ar, address, BMI_PARAM_GET_EEPROM_BOARD_ID, - &result); + if (ar->cal_mode == ATH10K_PRE_CAL_MODE_DT || + ar->cal_mode == ATH10K_PRE_CAL_MODE_FILE) + bmi_board_id_param = BMI_PARAM_GET_FLASH_BOARD_ID; + else + bmi_board_id_param = BMI_PARAM_GET_EEPROM_BOARD_ID; + + ret = ath10k_bmi_execute(ar, address, bmi_board_id_param, &result); if (ret) { ath10k_err(ar, "could not execute otp for board id check: %d\n", ret); @@ -739,6 +744,11 @@ static int ath10k_download_and_run_otp(s return ret; } + /* As of now pre-cal is valid for 10_4 variants */ + if (ar->cal_mode == ATH10K_PRE_CAL_MODE_DT || + ar->cal_mode == ATH10K_PRE_CAL_MODE_FILE) + bmi_otp_exe_param = BMI_PARAM_FLASH_SECTION_ALL; + ret = ath10k_bmi_execute(ar, address, bmi_otp_exe_param, &result); if (ret) { ath10k_err(ar, "could not execute otp (%d)\n", ret); Patches currently in stable-queue which might be from akolli@qti.qualcomm.com are queue-4.9/ath10k-add-bmi-parameters-to-fix-calibration-from-dt-pre-cal.patch