From: Oza Pawandeep <poza@codeaurora.org>
To: Bjorn Helgaas <bhelgaas@google.com>,
Philippe Ombredanne <pombredanne@nexb.com>,
Thomas Gleixner <tglx@linutronix.de>,
Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
Kate Stewart <kstewart@linuxfoundation.org>,
linux-pci@vger.kernel.org, linux-kernel@vger.kernel.org,
Dongdong Liu <liudongdong3@huawei.com>,
Keith Busch <keith.busch@intel.com>, Wei Zhang <wzhang@fb.com>,
Sinan Kaya <okaya@codeaurora.org>,
Timur Tabi <timur@codeaurora.org>
Cc: Oza Pawandeep <poza@codeaurora.org>
Subject: [PATCH v14 5/9] PCI/DPC: Unify and plumb error handling into DPC
Date: Mon, 23 Apr 2018 11:23:09 -0400 [thread overview]
Message-ID: <1524496993-29799-6-git-send-email-poza@codeaurora.org> (raw)
In-Reply-To: <1524496993-29799-1-git-send-email-poza@codeaurora.org>
Current DPC driver does not do recovery, e.g. calling end-point's driver's
callbacks, which sanitize the sw.
DPC driver implements link_reset callback, and calls pci_do_recovery().
Signed-off-by: Oza Pawandeep <poza@codeaurora.org>
diff --git a/drivers/pci/pcie/err.c b/drivers/pci/pcie/err.c
index 98aeec4..d02e029 100644
--- a/drivers/pci/pcie/err.c
+++ b/drivers/pci/pcie/err.c
@@ -19,6 +19,7 @@
#include <linux/aer.h>
#include <linux/pcieport_if.h>
#include "portdrv.h"
+#include "./../pci.h"
struct aer_broadcast_data {
enum pci_channel_state state;
@@ -179,11 +180,12 @@ static pci_ers_result_t default_reset_link(struct pci_dev *dev)
return PCI_ERS_RESULT_RECOVERED;
}
-static pci_ers_result_t reset_link(struct pci_dev *dev)
+static pci_ers_result_t reset_link(struct pci_dev *dev, int severity)
{
struct pci_dev *udev;
pci_ers_result_t status;
struct pcie_port_service_driver *driver = NULL;
+ u32 service;
if (dev->hdr_type == PCI_HEADER_TYPE_BRIDGE) {
/* Reset this port for all subordinates */
@@ -193,8 +195,12 @@ static pci_ers_result_t reset_link(struct pci_dev *dev)
udev = dev->bus->self;
}
- /* Use the aer driver of the component firstly */
- driver = pcie_port_find_service(udev, PCIE_PORT_SERVICE_AER);
+ if (severity == DPC_FATAL)
+ service = PCIE_PORT_SERVICE_DPC;
+ else
+ service = PCIE_PORT_SERVICE_AER;
+
+ driver = pcie_port_find_service(udev, service);
if (driver && driver->reset_link) {
status = driver->reset_link(udev);
@@ -281,7 +287,8 @@ void pcie_do_recovery(struct pci_dev *dev, int severity)
pci_ers_result_t status, result = PCI_ERS_RESULT_RECOVERED;
enum pci_channel_state state;
- if (severity == AER_FATAL)
+ if ((severity == AER_FATAL) ||
+ (severity == DPC_FATAL))
state = pci_channel_io_frozen;
else
state = pci_channel_io_normal;
@@ -291,8 +298,9 @@ void pcie_do_recovery(struct pci_dev *dev, int severity)
"error_detected",
report_error_detected);
- if (severity == AER_FATAL) {
- result = reset_link(dev);
+ if ((severity == AER_FATAL) ||
+ (severity == DPC_FATAL)) {
+ result = reset_link(dev, severity);
if (result != PCI_ERS_RESULT_RECOVERED)
goto failed;
}
diff --git a/drivers/pci/pcie/pcie-dpc.c b/drivers/pci/pcie/pcie-dpc.c
index 38e40c6..ad02298 100644
--- a/drivers/pci/pcie/pcie-dpc.c
+++ b/drivers/pci/pcie/pcie-dpc.c
@@ -13,6 +13,7 @@
#include <linux/pcieport_if.h>
#include "../pci.h"
#include "aer/aerdrv.h"
+#include "portdrv.h"
struct dpc_dev {
struct pcie_device *dev;
@@ -82,12 +83,25 @@ static void dpc_wait_link_inactive(struct dpc_dev *dpc)
dev_warn(dev, "Link state not disabled for DPC event\n");
}
-static void dpc_work(struct work_struct *work)
+/**
+ * dpc_reset_link - reset link DPC routine
+ * @pdev: pointer to Root Port's pci_dev data structure
+ *
+ * Invoked by Port Bus driver when performing link reset at Root Port.
+ */
+static pci_ers_result_t dpc_reset_link(struct pci_dev *pdev)
{
- struct dpc_dev *dpc = container_of(work, struct dpc_dev, work);
- struct pci_dev *dev, *temp, *pdev = dpc->dev->port;
struct pci_bus *parent = pdev->subordinate;
- u16 cap = dpc->cap_pos, ctl;
+ struct pci_dev *dev, *temp;
+ struct dpc_dev *dpc;
+ struct pcie_device *pciedev;
+ struct device *devdpc;
+ u16 cap, ctl;
+
+ devdpc = pcie_port_find_device(pdev, PCIE_PORT_SERVICE_DPC);
+ pciedev = to_pcie_device(devdpc);
+ dpc = get_service_data(pciedev);
+ cap = dpc->cap_pos;
pci_lock_rescan_remove();
list_for_each_entry_safe_reverse(dev, temp, &parent->devices,
@@ -104,7 +118,7 @@ static void dpc_work(struct work_struct *work)
dpc_wait_link_inactive(dpc);
if (dpc->rp_extensions && dpc_wait_rp_inactive(dpc))
- return;
+ return PCI_ERS_RESULT_DISCONNECT;
if (dpc->rp_extensions && dpc->rp_pio_status) {
pci_write_config_dword(pdev, cap + PCI_EXP_DPC_RP_PIO_STATUS,
dpc->rp_pio_status);
@@ -117,8 +131,18 @@ static void dpc_work(struct work_struct *work)
pci_read_config_word(pdev, cap + PCI_EXP_DPC_CTL, &ctl);
pci_write_config_word(pdev, cap + PCI_EXP_DPC_CTL,
ctl | PCI_EXP_DPC_CTL_INT_EN);
+
+ return PCI_ERS_RESULT_RECOVERED;
}
+static void dpc_work(struct work_struct *work)
+{
+ struct dpc_dev *dpc = container_of(work, struct dpc_dev, work);
+ struct pci_dev *pdev = dpc->dev->port;
+
+ /* From DPC point of view error is always FATAL. */
+ pcie_do_recovery(pdev, DPC_FATAL);
+}
static void dpc_process_rp_pio_error(struct dpc_dev *dpc)
{
struct device *dev = &dpc->dev->device;
@@ -297,6 +321,7 @@ static struct pcie_port_service_driver dpcdriver = {
.service = PCIE_PORT_SERVICE_DPC,
.probe = dpc_probe,
.remove = dpc_remove,
+ .reset_link = dpc_reset_link,
};
static int __init dpc_service_init(void)
diff --git a/include/linux/aer.h b/include/linux/aer.h
index 8f87bbe..9cfd0b8 100644
--- a/include/linux/aer.h
+++ b/include/linux/aer.h
@@ -15,6 +15,8 @@
#define AER_FATAL 1
#define AER_CORRECTABLE 2
+#define DPC_FATAL 4
+
struct pci_dev;
struct aer_header_log_regs {
--
2.7.4
next prev parent reply other threads:[~2018-04-23 15:23 UTC|newest]
Thread overview: 15+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-04-23 15:23 [PATCH v14 0/9] Address error and recovery for AER and DPC Oza Pawandeep
2018-04-23 15:23 ` [PATCH v14 1/9] PCI/AER: Rename error recovery to generic PCI naming Oza Pawandeep
2018-04-23 15:23 ` [PATCH v14 2/9] PCI/AER: Factor out error reporting from AER Oza Pawandeep
2018-04-23 15:23 ` [PATCH v14 3/9] PCI/PORTDRV: Implement generic find service Oza Pawandeep
2018-04-23 15:23 ` [PATCH v14 4/9] PCI/PORTDRV: Implement generic find device Oza Pawandeep
2018-04-23 15:23 ` Oza Pawandeep [this message]
2018-04-23 15:23 ` [PATCH v14 6/9] PCI: Unify wait for link active into generic PCI Oza Pawandeep
2018-04-23 15:23 ` [PATCH v14 7/9] PCI/DPC: Disable ERR_NONFATAL and enable ERR_FATAL for DPC Oza Pawandeep
2018-04-23 15:23 ` [PATCH v14 8/9] PCI/AER/DPC: Align FATAL error handling for AER and DPC Oza Pawandeep
2018-04-24 4:47 ` kbuild test robot
2018-04-24 4:47 ` [RFC PATCH] PCI/AER/DPC: pcie_do_fatal_recovery() can be static kbuild test robot
2018-04-23 15:23 ` [PATCH v14 9/9] pci-error-recovery: Add AER_FATAL handling Oza Pawandeep
2018-04-26 5:30 ` [PATCH v14 0/9] Address error and recovery for AER and DPC poza
2018-04-30 22:40 ` Bjorn Helgaas
2018-05-01 10:00 ` poza
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1524496993-29799-6-git-send-email-poza@codeaurora.org \
--to=poza@codeaurora.org \
--cc=bhelgaas@google.com \
--cc=gregkh@linuxfoundation.org \
--cc=keith.busch@intel.com \
--cc=kstewart@linuxfoundation.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pci@vger.kernel.org \
--cc=liudongdong3@huawei.com \
--cc=okaya@codeaurora.org \
--cc=pombredanne@nexb.com \
--cc=tglx@linutronix.de \
--cc=timur@codeaurora.org \
--cc=wzhang@fb.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.