All of lore.kernel.org
 help / color / mirror / Atom feed
From: Oza Pawandeep <poza@codeaurora.org>
To: Bjorn Helgaas <bhelgaas@google.com>,
	Philippe Ombredanne <pombredanne@nexb.com>,
	Thomas Gleixner <tglx@linutronix.de>,
	Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
	Kate Stewart <kstewart@linuxfoundation.org>,
	linux-pci@vger.kernel.org, linux-kernel@vger.kernel.org,
	Dongdong Liu <liudongdong3@huawei.com>,
	Keith Busch <keith.busch@intel.com>, Wei Zhang <wzhang@fb.com>,
	Sinan Kaya <okaya@codeaurora.org>,
	Timur Tabi <timur@codeaurora.org>
Cc: Oza Pawandeep <poza@codeaurora.org>
Subject: [PATCH v14 6/9] PCI: Unify wait for link active into generic PCI
Date: Mon, 23 Apr 2018 11:23:10 -0400	[thread overview]
Message-ID: <1524496993-29799-7-git-send-email-poza@codeaurora.org> (raw)
In-Reply-To: <1524496993-29799-1-git-send-email-poza@codeaurora.org>

Clients such as HP, DPC are using pcie_wait_link_active(), which waits
till the link becomes active or inactive.

Made generic function and moved it to drivers/pci/pci.c

Signed-off-by: Oza Pawandeep <poza@codeaurora.org>

diff --git a/drivers/pci/hotplug/pciehp_hpc.c b/drivers/pci/hotplug/pciehp_hpc.c
index 18a42f8..e0c2b8e 100644
--- a/drivers/pci/hotplug/pciehp_hpc.c
+++ b/drivers/pci/hotplug/pciehp_hpc.c
@@ -231,25 +231,11 @@ bool pciehp_check_link_active(struct controller *ctrl)
 	return ret;
 }
 
-static void __pcie_wait_link_active(struct controller *ctrl, bool active)
-{
-	int timeout = 1000;
-
-	if (pciehp_check_link_active(ctrl) == active)
-		return;
-	while (timeout > 0) {
-		msleep(10);
-		timeout -= 10;
-		if (pciehp_check_link_active(ctrl) == active)
-			return;
-	}
-	ctrl_dbg(ctrl, "Data Link Layer Link Active not %s in 1000 msec\n",
-			active ? "set" : "cleared");
-}
-
 static void pcie_wait_link_active(struct controller *ctrl)
 {
-	__pcie_wait_link_active(ctrl, true);
+	struct pci_dev *pdev = ctrl_dev(ctrl);
+
+	pcie_wait_for_link(pdev, true);
 }
 
 static bool pci_bus_check_dev(struct pci_bus *bus, int devfn)
diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c
index f6a4dd1..2bcf977 100644
--- a/drivers/pci/pci.c
+++ b/drivers/pci/pci.c
@@ -4176,6 +4176,36 @@ static int pci_pm_reset(struct pci_dev *dev, int probe)
 	return 0;
 }
 
+/**
+ * pcie_wait_for_link - Wait for link till it's active/inactive
+ * @pdev: Bridge device
+ * @active: waiting for active or inactive ?
+ *
+ * Use this to wait till link becomes active or inactive.
+ */
+bool pcie_wait_for_link(struct pci_dev *pdev, bool active)
+{
+	int timeout = 1000;
+	bool ret;
+	u16 lnk_status;
+
+	for (;;) {
+		pcie_capability_read_word(pdev, PCI_EXP_LNKSTA, &lnk_status);
+		ret = !!(lnk_status & PCI_EXP_LNKSTA_DLLLA);
+		if (ret == active)
+			return true;
+		if (timeout <= 0)
+			break;
+		msleep(10);
+		timeout -= 10;
+	}
+
+	pci_info(pdev, "Data Link Layer Link Active not %s in 1000 msec\n",
+		 active ? "set" : "cleared");
+
+	return false;
+}
+
 void pci_reset_secondary_bus(struct pci_dev *dev)
 {
 	u16 ctrl;
diff --git a/drivers/pci/pci.h b/drivers/pci/pci.h
index abc514e..5c44fbc 100644
--- a/drivers/pci/pci.h
+++ b/drivers/pci/pci.h
@@ -345,6 +345,8 @@ void pci_enable_acs(struct pci_dev *dev);
 /* PCI error reporting and recovery */
 void pcie_do_recovery(struct pci_dev *dev, int severity);
 
+bool pcie_wait_for_link(struct pci_dev *pdev, bool active);
+
 #ifdef CONFIG_PCIEASPM
 void pcie_aspm_init_link_state(struct pci_dev *pdev);
 void pcie_aspm_exit_link_state(struct pci_dev *pdev);
diff --git a/drivers/pci/pcie/pcie-dpc.c b/drivers/pci/pcie/pcie-dpc.c
index ad02298..6baed85 100644
--- a/drivers/pci/pcie/pcie-dpc.c
+++ b/drivers/pci/pcie/pcie-dpc.c
@@ -68,19 +68,9 @@ static int dpc_wait_rp_inactive(struct dpc_dev *dpc)
 
 static void dpc_wait_link_inactive(struct dpc_dev *dpc)
 {
-	unsigned long timeout = jiffies + HZ;
 	struct pci_dev *pdev = dpc->dev->port;
-	struct device *dev = &dpc->dev->device;
-	u16 lnk_status;
 
-	pcie_capability_read_word(pdev, PCI_EXP_LNKSTA, &lnk_status);
-	while (lnk_status & PCI_EXP_LNKSTA_DLLLA &&
-					!time_after(jiffies, timeout)) {
-		msleep(10);
-		pcie_capability_read_word(pdev, PCI_EXP_LNKSTA, &lnk_status);
-	}
-	if (lnk_status & PCI_EXP_LNKSTA_DLLLA)
-		dev_warn(dev, "Link state not disabled for DPC event\n");
+	pcie_wait_for_link(pdev, false);
 }
 
 /**
-- 
2.7.4

  parent reply	other threads:[~2018-04-23 15:23 UTC|newest]

Thread overview: 15+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-04-23 15:23 [PATCH v14 0/9] Address error and recovery for AER and DPC Oza Pawandeep
2018-04-23 15:23 ` [PATCH v14 1/9] PCI/AER: Rename error recovery to generic PCI naming Oza Pawandeep
2018-04-23 15:23 ` [PATCH v14 2/9] PCI/AER: Factor out error reporting from AER Oza Pawandeep
2018-04-23 15:23 ` [PATCH v14 3/9] PCI/PORTDRV: Implement generic find service Oza Pawandeep
2018-04-23 15:23 ` [PATCH v14 4/9] PCI/PORTDRV: Implement generic find device Oza Pawandeep
2018-04-23 15:23 ` [PATCH v14 5/9] PCI/DPC: Unify and plumb error handling into DPC Oza Pawandeep
2018-04-23 15:23 ` Oza Pawandeep [this message]
2018-04-23 15:23 ` [PATCH v14 7/9] PCI/DPC: Disable ERR_NONFATAL and enable ERR_FATAL for DPC Oza Pawandeep
2018-04-23 15:23 ` [PATCH v14 8/9] PCI/AER/DPC: Align FATAL error handling for AER and DPC Oza Pawandeep
2018-04-24  4:47   ` kbuild test robot
2018-04-24  4:47   ` [RFC PATCH] PCI/AER/DPC: pcie_do_fatal_recovery() can be static kbuild test robot
2018-04-23 15:23 ` [PATCH v14 9/9] pci-error-recovery: Add AER_FATAL handling Oza Pawandeep
2018-04-26  5:30 ` [PATCH v14 0/9] Address error and recovery for AER and DPC poza
2018-04-30 22:40   ` Bjorn Helgaas
2018-05-01 10:00     ` poza

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1524496993-29799-7-git-send-email-poza@codeaurora.org \
    --to=poza@codeaurora.org \
    --cc=bhelgaas@google.com \
    --cc=gregkh@linuxfoundation.org \
    --cc=keith.busch@intel.com \
    --cc=kstewart@linuxfoundation.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-pci@vger.kernel.org \
    --cc=liudongdong3@huawei.com \
    --cc=okaya@codeaurora.org \
    --cc=pombredanne@nexb.com \
    --cc=tglx@linutronix.de \
    --cc=timur@codeaurora.org \
    --cc=wzhang@fb.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.