From: "KC" <kc@mail2000.com.tw>
To: ath10k <ath10k@lists.infradead.org>
Cc: KC Chen <KC1120@gmail.com>
Subject: ath10k driver firmware crash when bring up qca 9984 wireless car d
Date: Thu, 26 Apr 2018 16:46:38 +0800 (CST) [thread overview]
Message-ID: <1524732398.3848.kc@mail2000.com.tw> (raw)
[-- Attachment #1: Type: text/plain, Size: 488 bytes --]
Hi
I'm porting ath10k drivers for Linux 4.2.8.
Try to bring up QCA9984 wireless PCI-e card.
I have problem with running ath10k driver, firmware load then the kernel message will show the firmware crashed during boot.
The attachment is the error log.
I also tried firmware ver 10.4-3.2, 10.4-3.3 and 10.4-3.5.3 without success: same symptoms an same faults.
I can provide more information (logs) to help to figure out: where the problem is?
Thanks,
KC
[-- Attachment #2: ath10k_qca9984_firmware_crashed_.log --]
[-- Type: text/plain, Size: 8250 bytes --]
[ 5813.580836] Loading modules backported from Linux version v4.13.12-0-g0da7475
[ 5813.587986] Backport generated by backports.git v4.14-rc2-1-24-gc6db471
[ 5813.609284] ath10k_pci 0000:0a:00.0: irq 153 for MSI
[ 5813.614295] ath10k_pci 0000:0a:00.0: pci irq msi oper_irq_mode 2 irq_mode 0 reset_mode 0
[ 5813.664312] ath10k_pci 0000:0b:00.0: irq 154 for MSI
[ 5813.669309] ath10k_pci 0000:0b:00.0: pci irq msi oper_irq_mode 2 irq_mode 0 reset_mode 0
[ 5813.717310] ath10k_pci 0000:0a:00.0: qca9984/qca9994 hw1.0 target 0x01000000 chip_id 0x00000000 sub 168c:cafe
[ 5813.727246] ath10k_pci 0000:0a:00.0: kconfig debug 1 debugfs 1 tracing 0 dfs 1 testmode 0
[ 5813.735704] ath10k_pci 0000:0a:00.0: firmware ver 10.4-3.2-00072 api 5 features no-p2p,mfp,peer-flow-ctrl crc32 61dee96a
[ 5813.771996] ath10k_pci 0000:0b:00.0: qca9984/qca9994 hw1.0 target 0x01000000 chip_id 0x00000000 sub 168c:cafe
[ 5813.781969] ath10k_pci 0000:0b:00.0: kconfig debug 1 debugfs 1 tracing 0 dfs 1 testmode 0
[ 5813.790469] ath10k_pci 0000:0b:00.0: firmware ver 10.4-3.2-00072 api 5 features no-p2p,mfp,peer-flow-ctrl crc32 61dee96a
[ 5815.168034] ath10k_pci 0000:0a:00.0: board_file api 2 bmi_id 0:1 crc32 751efba1
[ 5815.223442] ath10k_pci 0000:0b:00.0: board_file api 2 bmi_id 0:2 crc32 751efba1
[ 5817.842722] ath10k_pci 0000:0a:00.0: firmware crashed! (uuid 7ade5233-a63c-49b0-bef2-a9365e0843b4)
[ 5817.851732] ath10k_pci 0000:0a:00.0: qca9984/qca9994 hw1.0 target 0x01000000 chip_id 0x00000000 sub 168c:cafe
[ 5817.861719] ath10k_pci 0000:0a:00.0: kconfig debug 1 debugfs 1 tracing 0 dfs 1 testmode 0
[ 5817.870168] ath10k_pci 0000:0a:00.0: firmware ver 10.4-3.2-00072 api 5 features no-p2p,mfp,peer-flow-ctrl crc32 61dee96a
[ 5817.881099] ath10k_pci 0000:0a:00.0: board_file api 2 bmi_id 0:1 crc32 751efba1
[ 5817.888418] ath10k_pci 0000:0a:00.0: htt-ver 0.0 wmi-op 6 htt-op 4 cal otp max-sta 32 raw 0 hwcrypto 1
[ 5817.899745] ath10k_pci 0000:0a:00.0: firmware register dump:
[ 5817.905411] ath10k_pci 0000:0a:00.0: [00]: 0x01000000 0x00000000 0x009CF084 0x00000000
[ 5817.913333] ath10k_pci 0000:0a:00.0: [04]: 0x009CF084 0x00060330 0x0000000E 0x00000000
[ 5817.921256] ath10k_pci 0000:0a:00.0: [08]: 0x00000004 0x00414B50 0x00405524 0x00975A00
[ 5817.929180] ath10k_pci 0000:0a:00.0: [12]: 0x00000000 0xFFFFFFFF 0x00973D28 0x00973D33
[ 5817.937105] ath10k_pci 0000:0a:00.0: [16]: 0x800D8B69 0x004069AC 0x00000004 0x00414B50
[ 5817.945032] ath10k_pci 0000:0a:00.0: [20]: 0x00401F00 0x00401F04 0x00000004 0x00000000
[ 5817.952957] ath10k_pci 0000:0a:00.0: [24]: 0x800C383A 0x004069DC 0x004149E0 0x00400000
[ 5817.960878] ath10k_pci 0000:0a:00.0: [28]: 0x00000000 0x00000000 0x004149E0 0x00400000
[ 5817.968802] ath10k_pci 0000:0a:00.0: [32]: 0x00405524 0x00975A00 0x00000000 0x00000000
[ 5817.976725] ath10k_pci 0000:0a:00.0: [36]: 0x809800A3 0x00406A0C 0x004149F0 0x009C3F98
[ 5817.984648] ath10k_pci 0000:0a:00.0: [40]: 0x00000000 0x00000000 0x0047EB48 0x00000004
[ 5817.992571] ath10k_pci 0000:0a:00.0: [44]: 0x00020EB2 0x00404C20 0x00000006 0x00000047
[ 5818.000497] ath10k_pci 0000:0a:00.0: [48]: 0x8098003A 0x00406A5C 0x00400000 0x00400600
[ 5818.008422] ath10k_pci 0000:0a:00.0: [52]: 0x80961A63 0x00406A4C 0x00400000 0x00000000
[ 5818.016348] ath10k_pci 0000:0a:00.0: [56]: 0x00406400 0x00000000 0x00402324 0x00000001
[ 5818.024274] ath10k_pci 0000:0a:00.0: Copy Engine register dump:
[ 5818.030210] ath10k_pci 0000:0a:00.0: [00]: 0x0004a000 7 7 8 7
[ 5818.036663] ath10k_pci 0000:0a:00.0: [01]: 0x0004a400 6 6 5 6
[ 5818.043119] ath10k_pci 0000:0a:00.0: [02]: 0x0004a800 0 0 127 0
[ 5818.049573] ath10k_pci 0000:0a:00.0: [03]: 0x0004ac00 0 0 0 0
[ 5818.056028] ath10k_pci 0000:0a:00.0: [04]: 0x0004b000 0 0 0 0
[ 5818.062482] ath10k_pci 0000:0a:00.0: [05]: 0x0004b400 0 0 0 0
[ 5818.068933] ath10k_pci 0000:0a:00.0: [06]: 0x0004b800 0 0 0 0
[ 5818.075386] ath10k_pci 0000:0a:00.0: [07]: 0x0004bc00 1 1 1 1
[ 5818.081838] ath10k_pci 0000:0a:00.0: [08]: 0x0004c000 0 0 127 0
[ 5818.088294] ath10k_pci 0000:0a:00.0: [09]: 0x0004c400 1 1 1 1
[ 5818.094746] ath10k_pci 0000:0a:00.0: [10]: 0x0004c800 0 0 0 0
[ 5818.101202] ath10k_pci 0000:0a:00.0: [11]: 0x0004cc00 0 0 0 0
[ 5818.107683] ath10k_pci 0000:0b:00.0: firmware crashed! (uuid ad40fac3-8bc4-4b21-9b68-5a71c29251a7)
[ 5818.116652] ath10k_pci 0000:0b:00.0: qca9984/qca9994 hw1.0 target 0x01000000 chip_id 0x00000000 sub 168c:cafe
[ 5818.126573] ath10k_pci 0000:0b:00.0: kconfig debug 1 debugfs 1 tracing 0 dfs 1 testmode 0
[ 5818.135022] ath10k_pci 0000:0b:00.0: firmware ver 10.4-3.2-00072 api 5 features no-p2p,mfp,peer-flow-ctrl crc32 61dee96a
[ 5818.145959] ath10k_pci 0000:0b:00.0: board_file api 2 bmi_id 0:2 crc32 751efba1
[ 5818.153281] ath10k_pci 0000:0b:00.0: htt-ver 0.0 wmi-op 6 htt-op 4 cal otp max-sta 32 raw 0 hwcrypto 1
[ 5818.164611] ath10k_pci 0000:0b:00.0: firmware register dump:
[ 5818.170279] ath10k_pci 0000:0b:00.0: [00]: 0x01000000 0x00000000 0x009CF084 0x00000000
[ 5818.178205] ath10k_pci 0000:0b:00.0: [04]: 0x009CF084 0x00060330 0x0000000E 0x00000000
[ 5818.186129] ath10k_pci 0000:0b:00.0: [08]: 0x00000004 0x00414B50 0x00405524 0x00975A00
[ 5818.194056] ath10k_pci 0000:0b:00.0: [12]: 0x00000000 0xFFFFFFFF 0x00973D28 0x00973D33
[ 5818.201983] ath10k_pci 0000:0b:00.0: [16]: 0x800D8B69 0x004069AC 0x00000004 0x00414B50
[ 5818.209907] ath10k_pci 0000:0b:00.0: [20]: 0x00401F00 0x00401F04 0x00000004 0x00000000
[ 5818.217830] ath10k_pci 0000:0b:00.0: [24]: 0x800C383A 0x004069DC 0x004149E0 0x00400000
[ 5818.225758] ath10k_pci 0000:0b:00.0: [28]: 0x00000000 0x00000000 0x004149E0 0x00400000
[ 5818.233684] ath10k_pci 0000:0b:00.0: [32]: 0x00405524 0x00975A00 0x00000000 0x00000000
[ 5818.241609] ath10k_pci 0000:0b:00.0: [36]: 0x809800A3 0x00406A0C 0x004149F0 0x009C3F98
[ 5818.249536] ath10k_pci 0000:0b:00.0: [40]: 0x00000000 0x00000000 0x0047EB48 0x00000004
[ 5818.257461] ath10k_pci 0000:0b:00.0: [44]: 0x00020ECA 0x00404C20 0x00000006 0x00000047
[ 5818.265387] ath10k_pci 0000:0b:00.0: [48]: 0x8098003A 0x00406A5C 0x00400000 0x00400600
[ 5818.273313] ath10k_pci 0000:0b:00.0: [52]: 0x80961A63 0x00406A4C 0x00400000 0x00000000
[ 5818.281241] ath10k_pci 0000:0b:00.0: [56]: 0x00406400 0x00000000 0x00402324 0x00000001
[ 5818.289167] ath10k_pci 0000:0b:00.0: Copy Engine register dump:
[ 5818.295102] ath10k_pci 0000:0b:00.0: [00]: 0x0004a000 7 7 8 7
[ 5818.301558] ath10k_pci 0000:0b:00.0: [01]: 0x0004a400 6 6 5 6
[ 5818.308011] ath10k_pci 0000:0b:00.0: [02]: 0x0004a800 0 0 127 0
[ 5818.314467] ath10k_pci 0000:0b:00.0: [03]: 0x0004ac00 0 0 0 0
[ 5818.320923] ath10k_pci 0000:0b:00.0: [04]: 0x0004b000 0 0 0 0
[ 5818.327381] ath10k_pci 0000:0b:00.0: [05]: 0x0004b400 0 0 0 0
[ 5818.333837] ath10k_pci 0000:0b:00.0: [06]: 0x0004b800 0 0 0 0
[ 5818.340294] ath10k_pci 0000:0b:00.0: [07]: 0x0004bc00 1 1 1 1
[ 5818.346750] ath10k_pci 0000:0b:00.0: [08]: 0x0004c000 0 0 127 0
[ 5818.353202] ath10k_pci 0000:0b:00.0: [09]: 0x0004c400 1 1 1 1
[ 5818.359661] ath10k_pci 0000:0b:00.0: [10]: 0x0004c800 0 0 0 0
[ 5818.366118] ath10k_pci 0000:0b:00.0: [11]: 0x0004cc00 0 0 0 0
[ 5818.797569] ath10k_pci 0000:0a:00.0: failed to receive control response completion, polling..
[ 5818.853576] ath10k_pci 0000:0b:00.0: failed to receive control response completion, polling..
[ 5819.805396] ath10k_pci 0000:0a:00.0: ctl_resp never came in (-110)
[ 5819.811590] ath10k_pci 0000:0a:00.0: failed to connect to HTC: -110
[ 5819.860779] ath10k_pci 0000:0a:00.0: could not init core (-110)
[ 5819.861336] ath10k_pci 0000:0b:00.0: ctl_resp never came in (-110)
[ 5819.861337] ath10k_pci 0000:0b:00.0: failed to connect to HTC: -110
[ 5819.879179] ath10k_pci 0000:0a:00.0: could not probe fw (-110)
[ 5819.892527] ath10k_pci 0000:0a:00.0: cannot restart a device that hasn't been started
[ 5819.904124] ath10k_pci 0000:0b:00.0: could not init core (-110)
[ 5819.910079] ath10k_pci 0000:0b:00.0: could not probe fw (-110)
[ 5819.920524] ath10k_pci 0000:0b:00.0: cannot restart a device that hasn't been started
[-- Attachment #3: Type: text/plain, Size: 146 bytes --]
_______________________________________________
ath10k mailing list
ath10k@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/ath10k
next reply other threads:[~2018-04-26 8:57 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-04-26 8:46 KC [this message]
2018-04-26 15:03 ` ath10k driver firmware crash when bring up qca 9984 wireless car d Ben Greear
2018-04-27 6:12 ` KC
2018-04-27 17:20 ` Ben Greear
2018-04-30 2:57 ` ath10k driver firmware crash when bring up qca 9984 wireless card KC
2018-04-30 16:00 ` Ben Greear
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1524732398.3848.kc@mail2000.com.tw \
--to=kc@mail2000.com.tw \
--cc=KC1120@gmail.com \
--cc=ath10k@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.