From: Oza Pawandeep <poza@codeaurora.org>
To: Bjorn Helgaas <bhelgaas@google.com>,
Philippe Ombredanne <pombredanne@nexb.com>,
Thomas Gleixner <tglx@linutronix.de>,
Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
Kate Stewart <kstewart@linuxfoundation.org>,
linux-pci@vger.kernel.org, linux-kernel@vger.kernel.org,
Dongdong Liu <liudongdong3@huawei.com>,
Keith Busch <keith.busch@intel.com>, Wei Zhang <wzhang@fb.com>,
Sinan Kaya <okaya@codeaurora.org>,
Timur Tabi <timur@codeaurora.org>
Cc: Oza Pawandeep <poza@codeaurora.org>
Subject: [PATCH v16 5/9] PCI/AER: Factor out error reporting from AER
Date: Fri, 11 May 2018 06:43:24 -0400 [thread overview]
Message-ID: <1526035408-31328-6-git-send-email-poza@codeaurora.org> (raw)
In-Reply-To: <1526035408-31328-1-git-send-email-poza@codeaurora.org>
This patch factors out error reporting callbacks, which are currently
tightly coupled with AER.
DPC should be able to register callbacks and attempt recovery when DPC
trigger event occurs.
Signed-off-by: Oza Pawandeep <poza@codeaurora.org>
diff --git a/drivers/pci/pcie/Makefile b/drivers/pci/pcie/Makefile
index 800e1d4..03f4e0b 100644
--- a/drivers/pci/pcie/Makefile
+++ b/drivers/pci/pcie/Makefile
@@ -2,7 +2,7 @@
#
# Makefile for PCI Express features and port driver
-pcieportdrv-y := portdrv_core.o portdrv_pci.o
+pcieportdrv-y := portdrv_core.o portdrv_pci.o err.o
obj-$(CONFIG_PCIEPORTBUS) += pcieportdrv.o
diff --git a/drivers/pci/pcie/aer/aerdrv.h b/drivers/pci/pcie/aer/aerdrv.h
index 08b4584..b4c9506 100644
--- a/drivers/pci/pcie/aer/aerdrv.h
+++ b/drivers/pci/pcie/aer/aerdrv.h
@@ -76,36 +76,6 @@ struct aer_rpc {
*/
};
-struct aer_broadcast_data {
- enum pci_channel_state state;
- enum pci_ers_result result;
-};
-
-static inline pci_ers_result_t merge_result(enum pci_ers_result orig,
- enum pci_ers_result new)
-{
- if (new == PCI_ERS_RESULT_NO_AER_DRIVER)
- return PCI_ERS_RESULT_NO_AER_DRIVER;
-
- if (new == PCI_ERS_RESULT_NONE)
- return orig;
-
- switch (orig) {
- case PCI_ERS_RESULT_CAN_RECOVER:
- case PCI_ERS_RESULT_RECOVERED:
- orig = new;
- break;
- case PCI_ERS_RESULT_DISCONNECT:
- if (new == PCI_ERS_RESULT_NEED_RESET)
- orig = PCI_ERS_RESULT_NEED_RESET;
- break;
- default:
- break;
- }
-
- return orig;
-}
-
extern struct bus_type pcie_port_bus_type;
void aer_isr(struct work_struct *work);
void aer_print_error(struct pci_dev *dev, struct aer_err_info *info);
diff --git a/drivers/pci/pcie/aer/aerdrv_core.c b/drivers/pci/pcie/aer/aerdrv_core.c
index 4444aa4..4fa1ee4 100644
--- a/drivers/pci/pcie/aer/aerdrv_core.c
+++ b/drivers/pci/pcie/aer/aerdrv_core.c
@@ -228,191 +228,6 @@ static bool find_source_device(struct pci_dev *parent,
return true;
}
-static int report_error_detected(struct pci_dev *dev, void *data)
-{
- pci_ers_result_t vote;
- const struct pci_error_handlers *err_handler;
- struct aer_broadcast_data *result_data;
- result_data = (struct aer_broadcast_data *) data;
-
- device_lock(&dev->dev);
- dev->error_state = result_data->state;
-
- if (!dev->driver ||
- !dev->driver->err_handler ||
- !dev->driver->err_handler->error_detected) {
- if (result_data->state == pci_channel_io_frozen &&
- dev->hdr_type != PCI_HEADER_TYPE_BRIDGE) {
- /*
- * In case of fatal recovery, if one of down-
- * stream device has no driver. We might be
- * unable to recover because a later insmod
- * of a driver for this device is unaware of
- * its hw state.
- */
- pci_printk(KERN_DEBUG, dev, "device has %s\n",
- dev->driver ?
- "no AER-aware driver" : "no driver");
- }
-
- /*
- * If there's any device in the subtree that does not
- * have an error_detected callback, returning
- * PCI_ERS_RESULT_NO_AER_DRIVER prevents calling of
- * the subsequent mmio_enabled/slot_reset/resume
- * callbacks of "any" device in the subtree. All the
- * devices in the subtree are left in the error state
- * without recovery.
- */
-
- if (dev->hdr_type != PCI_HEADER_TYPE_BRIDGE)
- vote = PCI_ERS_RESULT_NO_AER_DRIVER;
- else
- vote = PCI_ERS_RESULT_NONE;
- } else {
- err_handler = dev->driver->err_handler;
- vote = err_handler->error_detected(dev, result_data->state);
- pci_uevent_ers(dev, PCI_ERS_RESULT_NONE);
- }
-
- result_data->result = merge_result(result_data->result, vote);
- device_unlock(&dev->dev);
- return 0;
-}
-
-static int report_mmio_enabled(struct pci_dev *dev, void *data)
-{
- pci_ers_result_t vote;
- const struct pci_error_handlers *err_handler;
- struct aer_broadcast_data *result_data;
- result_data = (struct aer_broadcast_data *) data;
-
- device_lock(&dev->dev);
- if (!dev->driver ||
- !dev->driver->err_handler ||
- !dev->driver->err_handler->mmio_enabled)
- goto out;
-
- err_handler = dev->driver->err_handler;
- vote = err_handler->mmio_enabled(dev);
- result_data->result = merge_result(result_data->result, vote);
-out:
- device_unlock(&dev->dev);
- return 0;
-}
-
-static int report_slot_reset(struct pci_dev *dev, void *data)
-{
- pci_ers_result_t vote;
- const struct pci_error_handlers *err_handler;
- struct aer_broadcast_data *result_data;
- result_data = (struct aer_broadcast_data *) data;
-
- device_lock(&dev->dev);
- if (!dev->driver ||
- !dev->driver->err_handler ||
- !dev->driver->err_handler->slot_reset)
- goto out;
-
- err_handler = dev->driver->err_handler;
- vote = err_handler->slot_reset(dev);
- result_data->result = merge_result(result_data->result, vote);
-out:
- device_unlock(&dev->dev);
- return 0;
-}
-
-static int report_resume(struct pci_dev *dev, void *data)
-{
- const struct pci_error_handlers *err_handler;
-
- device_lock(&dev->dev);
- dev->error_state = pci_channel_io_normal;
-
- if (!dev->driver ||
- !dev->driver->err_handler ||
- !dev->driver->err_handler->resume)
- goto out;
-
- err_handler = dev->driver->err_handler;
- err_handler->resume(dev);
- pci_uevent_ers(dev, PCI_ERS_RESULT_RECOVERED);
-out:
- device_unlock(&dev->dev);
- return 0;
-}
-
-/**
- * broadcast_error_message - handle message broadcast to downstream drivers
- * @dev: pointer to from where in a hierarchy message is broadcasted down
- * @state: error state
- * @error_mesg: message to print
- * @cb: callback to be broadcasted
- *
- * Invoked during error recovery process. Once being invoked, the content
- * of error severity will be broadcasted to all downstream drivers in a
- * hierarchy in question.
- */
-static pci_ers_result_t broadcast_error_message(struct pci_dev *dev,
- enum pci_channel_state state,
- char *error_mesg,
- int (*cb)(struct pci_dev *, void *))
-{
- struct aer_broadcast_data result_data;
-
- pci_printk(KERN_DEBUG, dev, "broadcast %s message\n", error_mesg);
- result_data.state = state;
- if (cb == report_error_detected)
- result_data.result = PCI_ERS_RESULT_CAN_RECOVER;
- else
- result_data.result = PCI_ERS_RESULT_RECOVERED;
-
- if (dev->hdr_type == PCI_HEADER_TYPE_BRIDGE) {
- /*
- * If the error is reported by a bridge, we think this error
- * is related to the downstream link of the bridge, so we
- * do error recovery on all subordinates of the bridge instead
- * of the bridge and clear the error status of the bridge.
- */
- if (cb == report_error_detected)
- dev->error_state = state;
- pci_walk_bus(dev->subordinate, cb, &result_data);
- if (cb == report_resume) {
- pci_cleanup_aer_uncorrect_error_status(dev);
- dev->error_state = pci_channel_io_normal;
- }
- } else {
- /*
- * If the error is reported by an end point, we think this
- * error is related to the upstream link of the end point.
- */
- if (state == pci_channel_io_normal)
- /*
- * the error is non fatal so the bus is ok, just invoke
- * the callback for the function that logged the error.
- */
- cb(dev, &result_data);
- else
- pci_walk_bus(dev->bus, cb, &result_data);
- }
-
- return result_data.result;
-}
-
-/**
- * default_reset_link - default reset function
- * @dev: pointer to pci_dev data structure
- *
- * Invoked when performing link reset on a Downstream Port or a
- * Root Port with no aer driver.
- */
-static pci_ers_result_t default_reset_link(struct pci_dev *dev)
-{
- pci_reset_bridge_secondary_bus(dev);
- pci_printk(KERN_DEBUG, dev, "downstream link has been reset\n");
- return PCI_ERS_RESULT_RECOVERED;
-}
-
static int find_aer_service_iter(struct device *device, void *data)
{
struct pcie_port_service_driver *service_driver, **drv;
@@ -430,7 +245,7 @@ static int find_aer_service_iter(struct device *device, void *data)
return 0;
}
-static struct pcie_port_service_driver *find_aer_service(struct pci_dev *dev)
+struct pcie_port_service_driver *find_aer_service(struct pci_dev *dev)
{
struct pcie_port_service_driver *drv = NULL;
@@ -439,156 +254,6 @@ static struct pcie_port_service_driver *find_aer_service(struct pci_dev *dev)
return drv;
}
-static pci_ers_result_t reset_link(struct pci_dev *dev)
-{
- struct pci_dev *udev;
- pci_ers_result_t status;
- struct pcie_port_service_driver *driver;
-
- if (dev->hdr_type == PCI_HEADER_TYPE_BRIDGE) {
- /* Reset this port for all subordinates */
- udev = dev;
- } else {
- /* Reset the upstream component (likely downstream port) */
- udev = dev->bus->self;
- }
-
- /* Use the aer driver of the component firstly */
- driver = find_aer_service(udev);
-
- if (driver && driver->reset_link) {
- status = driver->reset_link(udev);
- } else if (udev->has_secondary_link) {
- status = default_reset_link(udev);
- } else {
- pci_printk(KERN_DEBUG, dev, "no link-reset support at upstream device %s\n",
- pci_name(udev));
- return PCI_ERS_RESULT_DISCONNECT;
- }
-
- if (status != PCI_ERS_RESULT_RECOVERED) {
- pci_printk(KERN_DEBUG, dev, "link reset at upstream device %s failed\n",
- pci_name(udev));
- return PCI_ERS_RESULT_DISCONNECT;
- }
-
- return status;
-}
-
-/**
- * pcie_do_fatal_recovery - handle fatal error recovery process
- * @dev: pointer to a pci_dev data structure of agent detecting an error
- *
- * Invoked when an error is fatal. Once being invoked, removes the devices
- * benetah this AER agent, followed by reset link e.g. secondary bus reset
- * followed by re-enumeration of devices.
- */
-
-void pcie_do_fatal_recovery(struct pci_dev *dev)
-{
- struct pci_dev *udev;
- struct pci_bus *parent;
- struct pci_dev *pdev, *temp;
- pci_ers_result_t result = PCI_ERS_RESULT_RECOVERED;
- struct aer_broadcast_data result_data;
-
- if (dev->hdr_type == PCI_HEADER_TYPE_BRIDGE)
- udev = dev;
- else
- udev = dev->bus->self;
-
- parent = udev->subordinate;
- pci_lock_rescan_remove();
- list_for_each_entry_safe_reverse(pdev, temp, &parent->devices,
- bus_list) {
- pci_dev_get(pdev);
- pci_dev_set_disconnected(pdev, NULL);
- if (pci_has_subordinate(pdev))
- pci_walk_bus(pdev->subordinate,
- pci_dev_set_disconnected, NULL);
- pci_stop_and_remove_bus_device(pdev);
- pci_dev_put(pdev);
- }
-
- result = reset_link(udev);
-
- if (dev->hdr_type == PCI_HEADER_TYPE_BRIDGE) {
- /*
- * If the error is reported by a bridge, we think this error
- * is related to the downstream link of the bridge, so we
- * do error recovery on all subordinates of the bridge instead
- * of the bridge and clear the error status of the bridge.
- */
- pci_walk_bus(dev->subordinate, report_resume, &result_data);
- pci_cleanup_aer_uncorrect_error_status(dev);
- }
-
- if (result == PCI_ERS_RESULT_RECOVERED) {
- if (pcie_wait_for_link(udev, true))
- pci_rescan_bus(udev->bus);
- } else {
- pci_uevent_ers(dev, PCI_ERS_RESULT_DISCONNECT);
- pci_info(dev, "AER: Device recovery failed\n");
- }
-
- pci_unlock_rescan_remove();
-}
-
-/**
- * pcie_do_nonfatal_recovery - handle nonfatal error recovery process
- * @dev: pointer to a pci_dev data structure of agent detecting an error
- *
- * Invoked when an error is nonfatal/fatal. Once being invoked, broadcast
- * error detected message to all downstream drivers within a hierarchy in
- * question and return the returned code.
- */
-void pcie_do_nonfatal_recovery(struct pci_dev *dev)
-{
- pci_ers_result_t status;
- enum pci_channel_state state;
-
- state = pci_channel_io_normal;
-
- status = broadcast_error_message(dev,
- state,
- "error_detected",
- report_error_detected);
-
- if (status == PCI_ERS_RESULT_CAN_RECOVER)
- status = broadcast_error_message(dev,
- state,
- "mmio_enabled",
- report_mmio_enabled);
-
- if (status == PCI_ERS_RESULT_NEED_RESET) {
- /*
- * TODO: Should call platform-specific
- * functions to reset slot before calling
- * drivers' slot_reset callbacks?
- */
- status = broadcast_error_message(dev,
- state,
- "slot_reset",
- report_slot_reset);
- }
-
- if (status != PCI_ERS_RESULT_RECOVERED)
- goto failed;
-
- broadcast_error_message(dev,
- state,
- "resume",
- report_resume);
-
- pci_info(dev, "AER: Device recovery successful\n");
- return;
-
-failed:
- pci_uevent_ers(dev, PCI_ERS_RESULT_DISCONNECT);
- /* TODO: Should kernel panic here? */
- pci_info(dev, "AER: Device recovery failed\n");
-}
-
/**
* handle_error_source - handle logging error into an event log
* @aerdev: pointer to pcie_device data structure of the root port
diff --git a/drivers/pci/pcie/err.c b/drivers/pci/pcie/err.c
new file mode 100644
index 0000000..c4ded88
--- /dev/null
+++ b/drivers/pci/pcie/err.c
@@ -0,0 +1,400 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * This file implements the error recovery as a core part of PCIe error
+ * reporting. When a PCIe error is delivered, an error message will be
+ * collected and printed to console, then, an error recovery procedure
+ * will be executed by following the PCI error recovery rules.
+ *
+ * Copyright (C) 2006 Intel Corp.
+ * Tom Long Nguyen (tom.l.nguyen@intel.com)
+ * Zhang Yanmin (yanmin.zhang@intel.com)
+ *
+ */
+
+#include <linux/pci.h>
+#include <linux/module.h>
+#include <linux/pci.h>
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/aer.h>
+#include "portdrv.h"
+#include "../pci.h"
+
+struct aer_broadcast_data {
+ enum pci_channel_state state;
+ enum pci_ers_result result;
+};
+
+static pci_ers_result_t merge_result(enum pci_ers_result orig,
+ enum pci_ers_result new)
+{
+ if (new == PCI_ERS_RESULT_NO_AER_DRIVER)
+ return PCI_ERS_RESULT_NO_AER_DRIVER;
+
+ if (new == PCI_ERS_RESULT_NONE)
+ return orig;
+
+ switch (orig) {
+ case PCI_ERS_RESULT_CAN_RECOVER:
+ case PCI_ERS_RESULT_RECOVERED:
+ orig = new;
+ break;
+ case PCI_ERS_RESULT_DISCONNECT:
+ if (new == PCI_ERS_RESULT_NEED_RESET)
+ orig = PCI_ERS_RESULT_NEED_RESET;
+ break;
+ default:
+ break;
+ }
+
+ return orig;
+}
+
+static int report_error_detected(struct pci_dev *dev, void *data)
+{
+ pci_ers_result_t vote;
+ const struct pci_error_handlers *err_handler;
+ struct aer_broadcast_data *result_data;
+
+ result_data = (struct aer_broadcast_data *) data;
+
+ device_lock(&dev->dev);
+ dev->error_state = result_data->state;
+
+ if (!dev->driver ||
+ !dev->driver->err_handler ||
+ !dev->driver->err_handler->error_detected) {
+ if (result_data->state == pci_channel_io_frozen &&
+ dev->hdr_type != PCI_HEADER_TYPE_BRIDGE) {
+ /*
+ * In case of fatal recovery, if one of down-
+ * stream device has no driver. We might be
+ * unable to recover because a later insmod
+ * of a driver for this device is unaware of
+ * its hw state.
+ */
+ pci_printk(KERN_DEBUG, dev, "device has %s\n",
+ dev->driver ?
+ "no AER-aware driver" : "no driver");
+ }
+
+ /*
+ * If there's any device in the subtree that does not
+ * have an error_detected callback, returning
+ * PCI_ERS_RESULT_NO_AER_DRIVER prevents calling of
+ * the subsequent mmio_enabled/slot_reset/resume
+ * callbacks of "any" device in the subtree. All the
+ * devices in the subtree are left in the error state
+ * without recovery.
+ */
+
+ if (dev->hdr_type != PCI_HEADER_TYPE_BRIDGE)
+ vote = PCI_ERS_RESULT_NO_AER_DRIVER;
+ else
+ vote = PCI_ERS_RESULT_NONE;
+ } else {
+ err_handler = dev->driver->err_handler;
+ vote = err_handler->error_detected(dev, result_data->state);
+#if defined(CONFIG_PCIEAER)
+ pci_uevent_ers(dev, PCI_ERS_RESULT_NONE);
+#endif
+ }
+
+ result_data->result = merge_result(result_data->result, vote);
+ device_unlock(&dev->dev);
+ return 0;
+}
+
+static int report_mmio_enabled(struct pci_dev *dev, void *data)
+{
+ pci_ers_result_t vote;
+ const struct pci_error_handlers *err_handler;
+ struct aer_broadcast_data *result_data;
+
+ result_data = (struct aer_broadcast_data *) data;
+
+ device_lock(&dev->dev);
+ if (!dev->driver ||
+ !dev->driver->err_handler ||
+ !dev->driver->err_handler->mmio_enabled)
+ goto out;
+
+ err_handler = dev->driver->err_handler;
+ vote = err_handler->mmio_enabled(dev);
+ result_data->result = merge_result(result_data->result, vote);
+out:
+ device_unlock(&dev->dev);
+ return 0;
+}
+
+static int report_slot_reset(struct pci_dev *dev, void *data)
+{
+ pci_ers_result_t vote;
+ const struct pci_error_handlers *err_handler;
+ struct aer_broadcast_data *result_data;
+
+ result_data = (struct aer_broadcast_data *) data;
+
+ device_lock(&dev->dev);
+ if (!dev->driver ||
+ !dev->driver->err_handler ||
+ !dev->driver->err_handler->slot_reset)
+ goto out;
+
+ err_handler = dev->driver->err_handler;
+ vote = err_handler->slot_reset(dev);
+ result_data->result = merge_result(result_data->result, vote);
+out:
+ device_unlock(&dev->dev);
+ return 0;
+}
+
+static int report_resume(struct pci_dev *dev, void *data)
+{
+ const struct pci_error_handlers *err_handler;
+
+ device_lock(&dev->dev);
+ dev->error_state = pci_channel_io_normal;
+
+ if (!dev->driver ||
+ !dev->driver->err_handler ||
+ !dev->driver->err_handler->resume)
+ goto out;
+
+ err_handler = dev->driver->err_handler;
+ err_handler->resume(dev);
+#if defined(CONFIG_PCIEAER)
+ pci_uevent_ers(dev, PCI_ERS_RESULT_RECOVERED);
+#endif
+out:
+ device_unlock(&dev->dev);
+ return 0;
+}
+
+/**
+ * default_reset_link - default reset function
+ * @dev: pointer to pci_dev data structure
+ *
+ * Invoked when performing link reset on a Downstream Port or a
+ * Root Port with no aer driver.
+ */
+static pci_ers_result_t default_reset_link(struct pci_dev *dev)
+{
+ pci_reset_bridge_secondary_bus(dev);
+ pci_printk(KERN_DEBUG, dev, "downstream link has been reset\n");
+ return PCI_ERS_RESULT_RECOVERED;
+}
+
+static pci_ers_result_t reset_link(struct pci_dev *dev)
+{
+ struct pci_dev *udev;
+ pci_ers_result_t status;
+ struct pcie_port_service_driver *driver;
+
+ if (dev->hdr_type == PCI_HEADER_TYPE_BRIDGE) {
+ /* Reset this port for all subordinates */
+ udev = dev;
+ } else {
+ /* Reset the upstream component (likely downstream port) */
+ udev = dev->bus->self;
+ }
+
+#if IS_ENABLED(CONFIG_PCIEAER)
+ /* Use the aer driver of the component firstly */
+ driver = find_aer_service(udev);
+#endif
+
+ if (driver && driver->reset_link) {
+ status = driver->reset_link(udev);
+ } else if (udev->has_secondary_link) {
+ status = default_reset_link(udev);
+ } else {
+ pci_printk(KERN_DEBUG, dev, "no link-reset support at upstream device %s\n",
+ pci_name(udev));
+ return PCI_ERS_RESULT_DISCONNECT;
+ }
+
+ if (status != PCI_ERS_RESULT_RECOVERED) {
+ pci_printk(KERN_DEBUG, dev, "link reset at upstream device %s failed\n",
+ pci_name(udev));
+ return PCI_ERS_RESULT_DISCONNECT;
+ }
+
+ return status;
+}
+
+/**
+ * broadcast_error_message - handle message broadcast to downstream drivers
+ * @dev: pointer to from where in a hierarchy message is broadcasted down
+ * @state: error state
+ * @error_mesg: message to print
+ * @cb: callback to be broadcasted
+ *
+ * Invoked during error recovery process. Once being invoked, the content
+ * of error severity will be broadcasted to all downstream drivers in a
+ * hierarchy in question.
+ */
+static pci_ers_result_t broadcast_error_message(struct pci_dev *dev,
+ enum pci_channel_state state,
+ char *error_mesg,
+ int (*cb)(struct pci_dev *, void *))
+{
+ struct aer_broadcast_data result_data;
+
+ pci_printk(KERN_DEBUG, dev, "broadcast %s message\n", error_mesg);
+ result_data.state = state;
+ if (cb == report_error_detected)
+ result_data.result = PCI_ERS_RESULT_CAN_RECOVER;
+ else
+ result_data.result = PCI_ERS_RESULT_RECOVERED;
+
+ if (dev->hdr_type == PCI_HEADER_TYPE_BRIDGE) {
+ /*
+ * If the error is reported by a bridge, we think this error
+ * is related to the downstream link of the bridge, so we
+ * do error recovery on all subordinates of the bridge instead
+ * of the bridge and clear the error status of the bridge.
+ */
+ if (cb == report_error_detected)
+ dev->error_state = state;
+ pci_walk_bus(dev->subordinate, cb, &result_data);
+ if (cb == report_resume) {
+ pci_cleanup_aer_uncorrect_error_status(dev);
+ dev->error_state = pci_channel_io_normal;
+ }
+ } else {
+ /*
+ * If the error is reported by an end point, we think this
+ * error is related to the upstream link of the end point.
+ */
+ if (state == pci_channel_io_normal)
+ /*
+ * the error is non fatal so the bus is ok, just invoke
+ * the callback for the function that logged the error.
+ */
+ cb(dev, &result_data);
+ else
+ pci_walk_bus(dev->bus, cb, &result_data);
+ }
+
+ return result_data.result;
+}
+
+/**
+ * pcie_do_fatal_recovery - handle fatal error recovery process
+ * @dev: pointer to a pci_dev data structure of agent detecting an error
+ *
+ * Invoked when an error is fatal. Once being invoked, removes the devices
+ * benetah this AER agent, followed by reset link e.g. secondary bus reset
+ * followed by re-enumeration of devices.
+ */
+
+void pcie_do_fatal_recovery(struct pci_dev *dev)
+{
+ struct pci_dev *udev;
+ struct pci_bus *parent;
+ struct pci_dev *pdev, *temp;
+ pci_ers_result_t result = PCI_ERS_RESULT_RECOVERED;
+ struct aer_broadcast_data result_data;
+
+ if (dev->hdr_type == PCI_HEADER_TYPE_BRIDGE)
+ udev = dev;
+ else
+ udev = dev->bus->self;
+
+ parent = udev->subordinate;
+ pci_lock_rescan_remove();
+ list_for_each_entry_safe_reverse(pdev, temp, &parent->devices,
+ bus_list) {
+ pci_dev_get(pdev);
+ pci_dev_set_disconnected(pdev, NULL);
+ if (pci_has_subordinate(pdev))
+ pci_walk_bus(pdev->subordinate,
+ pci_dev_set_disconnected, NULL);
+ pci_stop_and_remove_bus_device(pdev);
+ pci_dev_put(pdev);
+ }
+
+ result = reset_link(udev);
+
+ if (dev->hdr_type == PCI_HEADER_TYPE_BRIDGE) {
+ /*
+ * If the error is reported by a bridge, we think this error
+ * is related to the downstream link of the bridge, so we
+ * do error recovery on all subordinates of the bridge instead
+ * of the bridge and clear the error status of the bridge.
+ */
+ pci_walk_bus(dev->subordinate, report_resume, &result_data);
+ pci_cleanup_aer_uncorrect_error_status(dev);
+ }
+
+ if (result == PCI_ERS_RESULT_RECOVERED) {
+ if (pcie_wait_for_link(udev, true))
+ pci_rescan_bus(udev->bus);
+ pci_info(dev, "Device recovery successful\n");
+ } else {
+#if defined(CONFIG_PCIEAER)
+ pci_uevent_ers(dev, PCI_ERS_RESULT_DISCONNECT);
+#endif
+ pci_info(dev, "Device recovery failed\n");
+ }
+
+ pci_unlock_rescan_remove();
+}
+
+/**
+ * pcie_do_nonfatal_recovery - handle nonfatal error recovery process
+ * @dev: pointer to a pci_dev data structure of agent detecting an error
+ *
+ * Invoked when an error is nonfatal/fatal. Once being invoked, broadcast
+ * error detected message to all downstream drivers within a hierarchy in
+ * question and return the returned code.
+ */
+void pcie_do_nonfatal_recovery(struct pci_dev *dev)
+{
+ pci_ers_result_t status;
+ enum pci_channel_state state;
+
+ state = pci_channel_io_normal;
+
+ status = broadcast_error_message(dev,
+ state,
+ "error_detected",
+ report_error_detected);
+
+ if (status == PCI_ERS_RESULT_CAN_RECOVER)
+ status = broadcast_error_message(dev,
+ state,
+ "mmio_enabled",
+ report_mmio_enabled);
+
+ if (status == PCI_ERS_RESULT_NEED_RESET) {
+ /*
+ * TODO: Should call platform-specific
+ * functions to reset slot before calling
+ * drivers' slot_reset callbacks?
+ */
+ status = broadcast_error_message(dev,
+ state,
+ "slot_reset",
+ report_slot_reset);
+ }
+
+ if (status != PCI_ERS_RESULT_RECOVERED)
+ goto failed;
+
+ broadcast_error_message(dev,
+ state,
+ "resume",
+ report_resume);
+
+ pci_info(dev, "AER: Device recovery successful\n");
+ return;
+
+failed:
+#if defined(CONFIG_PCIEAER)
+ pci_uevent_ers(dev, PCI_ERS_RESULT_DISCONNECT);
+#endif
+ /* TODO: Should kernel panic here? */
+ pci_info(dev, "AER: Device recovery failed\n");
+}
diff --git a/drivers/pci/pcie/portdrv.h b/drivers/pci/pcie/portdrv.h
index d0c6783..47c9824 100644
--- a/drivers/pci/pcie/portdrv.h
+++ b/drivers/pci/pcie/portdrv.h
@@ -112,4 +112,5 @@ static inline bool pcie_pme_no_msi(void) { return false; }
static inline void pcie_pme_interrupt_enable(struct pci_dev *dev, bool en) {}
#endif /* !CONFIG_PCIE_PME */
+struct pcie_port_service_driver *find_aer_service(struct pci_dev *dev);
#endif /* _PORTDRV_H_ */
--
2.7.4
next prev parent reply other threads:[~2018-05-11 10:43 UTC|newest]
Thread overview: 29+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-05-11 10:43 [PATCH v16 0/9] Address error and recovery for AER and DPC Oza Pawandeep
2018-05-11 10:43 ` [PATCH v16 1/9] PCI: Unify wait for link active into generic PCI Oza Pawandeep
2018-05-11 10:43 ` [PATCH v16 2/9] pci-error-recovery: Add AER_FATAL handling Oza Pawandeep
2018-05-11 10:43 ` [PATCH v16 3/9] PCI/AER: Handle ERR_FATAL with removal and re-enumeration of devices Oza Pawandeep
2018-05-15 23:59 ` Bjorn Helgaas
2018-05-16 5:49 ` poza
2018-05-11 10:43 ` [PATCH v16 4/9] PCI/AER: Rename error recovery to generic PCI naming Oza Pawandeep
2018-05-11 10:43 ` Oza Pawandeep [this message]
2018-05-11 12:58 ` [PATCH v16 5/9] PCI/AER: Factor out error reporting from AER Lukas Wunner
2018-05-11 15:34 ` poza
2018-05-11 15:54 ` Lukas Wunner
2018-05-11 16:11 ` poza
2018-05-16 0:06 ` Bjorn Helgaas
2018-05-11 10:43 ` [PATCH v16 6/9] PCI/PORTDRV: Implement generic find service Oza Pawandeep
2018-05-11 10:43 ` [PATCH v16 7/9] PCI/PORTDRV: Implement generic find device Oza Pawandeep
2018-05-11 10:43 ` [PATCH v16 8/9] PCI/DPC: Unify and plumb error handling into DPC Oza Pawandeep
2018-05-11 11:52 ` poza
2018-05-15 23:56 ` Bjorn Helgaas
2018-05-16 8:16 ` poza
2018-05-16 10:52 ` Bjorn Helgaas
2018-05-16 12:15 ` poza
2018-05-16 13:04 ` Bjorn Helgaas
2018-05-16 13:58 ` poza
2018-05-16 14:58 ` poza
2018-05-16 20:02 ` Bjorn Helgaas
2018-05-16 12:51 ` poza
2018-05-16 13:09 ` Bjorn Helgaas
2018-05-11 10:43 ` [PATCH v16 9/9] PCI/DPC: Disable ERR_NONFATAL and enable ERR_FATAL for DPC Oza Pawandeep
2018-05-16 0:09 ` [PATCH v16 0/9] Address error and recovery for AER and DPC Bjorn Helgaas
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1526035408-31328-6-git-send-email-poza@codeaurora.org \
--to=poza@codeaurora.org \
--cc=bhelgaas@google.com \
--cc=gregkh@linuxfoundation.org \
--cc=keith.busch@intel.com \
--cc=kstewart@linuxfoundation.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pci@vger.kernel.org \
--cc=liudongdong3@huawei.com \
--cc=okaya@codeaurora.org \
--cc=pombredanne@nexb.com \
--cc=tglx@linutronix.de \
--cc=timur@codeaurora.org \
--cc=wzhang@fb.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.