From: thor.thayer@linux.intel.com (thor.thayer at linux.intel.com)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCHv2] arm64: dts: stratix10: Add QSPI support for Stratix10
Date: Fri, 11 May 2018 11:10:52 -0500 [thread overview]
Message-ID: <1526055052-11371-1-git-send-email-thor.thayer@linux.intel.com> (raw)
From: Thor Thayer <thor.thayer@linux.intel.com>
Add qspi_clock
The qspi_clk frequency is updated by U-Boot before starting Linux.
Add QSPI interface node.
Add QSPI flash memory child node.
Setup the QSPI memory in 2 partitions.
Signed-off-by: Thor Thayer <thor.thayer@linux.intel.com>
---
v2 s/_/-/ in qspi-clk
rename flash node.
use partition child node notation
---
arch/arm64/boot/dts/altera/socfpga_stratix10.dtsi | 22 ++++++++++++++
.../boot/dts/altera/socfpga_stratix10_socdk.dts | 35 ++++++++++++++++++++++
2 files changed, 57 insertions(+)
diff --git a/arch/arm64/boot/dts/altera/socfpga_stratix10.dtsi b/arch/arm64/boot/dts/altera/socfpga_stratix10.dtsi
index e6b059378dc0..bac01b0b7907 100644
--- a/arch/arm64/boot/dts/altera/socfpga_stratix10.dtsi
+++ b/arch/arm64/boot/dts/altera/socfpga_stratix10.dtsi
@@ -119,6 +119,12 @@
#clock-cells = <0>;
compatible = "fixed-clock";
};
+
+ qspi_clk: qspi-clk {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-frequency = <200000000>;
+ };
};
gmac0: ethernet at ff800000 {
@@ -466,5 +472,21 @@
interrupts = <16 4>, <48 4>;
};
};
+
+ qspi: spi at ff8d2000 {
+ compatible = "cdns,qspi-nor";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0xff8d2000 0x100>,
+ <0xff900000 0x100000>;
+ interrupts = <0 3 4>;
+ cdns,fifo-depth = <128>;
+ cdns,fifo-width = <4>;
+ cdns,trigger-address = <0x00000000>;
+ clocks = <&qspi_clk>;
+ bus-num = <1>;
+
+ status = "disabled";
+ };
};
};
diff --git a/arch/arm64/boot/dts/altera/socfpga_stratix10_socdk.dts b/arch/arm64/boot/dts/altera/socfpga_stratix10_socdk.dts
index f9b1ef12db48..96542150654b 100644
--- a/arch/arm64/boot/dts/altera/socfpga_stratix10_socdk.dts
+++ b/arch/arm64/boot/dts/altera/socfpga_stratix10_socdk.dts
@@ -147,3 +147,38 @@
reg = <0x68>;
};
};
+
+&qspi {
+ flash at 0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "n25q00aa";
+ reg = <0>;
+ spi-max-frequency = <50000000>;
+
+ m25p,fast-read;
+ cdns,page-size = <256>;
+ cdns,block-size = <16>;
+ cdns,read-delay = <1>;
+ cdns,tshsl-ns = <50>;
+ cdns,tsd2d-ns = <50>;
+ cdns,tchsh-ns = <4>;
+ cdns,tslch-ns = <4>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ qspi_boot: partition at 0 {
+ label = "Boot and fpga data";
+ reg = <0x0 0x4000000>;
+ };
+
+ qspi_rootfs: partition at 4000000 {
+ label = "Root Filesystem - JFFS2";
+ reg = <0x4000000 0x4000000>;
+ };
+ };
+ };
+};
--
2.7.4
WARNING: multiple messages have this Message-ID (diff)
From: thor.thayer@linux.intel.com
To: dinguyen@kernel.org, robh+dt@kernel.org, mark.rutland@arm.com
Cc: catalin.marinas@arm.com, will.deacon@arm.com,
devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org,
Thor Thayer <thor.thayer@linux.intel.com>
Subject: [PATCHv2] arm64: dts: stratix10: Add QSPI support for Stratix10
Date: Fri, 11 May 2018 11:10:52 -0500 [thread overview]
Message-ID: <1526055052-11371-1-git-send-email-thor.thayer@linux.intel.com> (raw)
From: Thor Thayer <thor.thayer@linux.intel.com>
Add qspi_clock
The qspi_clk frequency is updated by U-Boot before starting Linux.
Add QSPI interface node.
Add QSPI flash memory child node.
Setup the QSPI memory in 2 partitions.
Signed-off-by: Thor Thayer <thor.thayer@linux.intel.com>
---
v2 s/_/-/ in qspi-clk
rename flash node.
use partition child node notation
---
arch/arm64/boot/dts/altera/socfpga_stratix10.dtsi | 22 ++++++++++++++
.../boot/dts/altera/socfpga_stratix10_socdk.dts | 35 ++++++++++++++++++++++
2 files changed, 57 insertions(+)
diff --git a/arch/arm64/boot/dts/altera/socfpga_stratix10.dtsi b/arch/arm64/boot/dts/altera/socfpga_stratix10.dtsi
index e6b059378dc0..bac01b0b7907 100644
--- a/arch/arm64/boot/dts/altera/socfpga_stratix10.dtsi
+++ b/arch/arm64/boot/dts/altera/socfpga_stratix10.dtsi
@@ -119,6 +119,12 @@
#clock-cells = <0>;
compatible = "fixed-clock";
};
+
+ qspi_clk: qspi-clk {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-frequency = <200000000>;
+ };
};
gmac0: ethernet@ff800000 {
@@ -466,5 +472,21 @@
interrupts = <16 4>, <48 4>;
};
};
+
+ qspi: spi@ff8d2000 {
+ compatible = "cdns,qspi-nor";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0xff8d2000 0x100>,
+ <0xff900000 0x100000>;
+ interrupts = <0 3 4>;
+ cdns,fifo-depth = <128>;
+ cdns,fifo-width = <4>;
+ cdns,trigger-address = <0x00000000>;
+ clocks = <&qspi_clk>;
+ bus-num = <1>;
+
+ status = "disabled";
+ };
};
};
diff --git a/arch/arm64/boot/dts/altera/socfpga_stratix10_socdk.dts b/arch/arm64/boot/dts/altera/socfpga_stratix10_socdk.dts
index f9b1ef12db48..96542150654b 100644
--- a/arch/arm64/boot/dts/altera/socfpga_stratix10_socdk.dts
+++ b/arch/arm64/boot/dts/altera/socfpga_stratix10_socdk.dts
@@ -147,3 +147,38 @@
reg = <0x68>;
};
};
+
+&qspi {
+ flash@0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "n25q00aa";
+ reg = <0>;
+ spi-max-frequency = <50000000>;
+
+ m25p,fast-read;
+ cdns,page-size = <256>;
+ cdns,block-size = <16>;
+ cdns,read-delay = <1>;
+ cdns,tshsl-ns = <50>;
+ cdns,tsd2d-ns = <50>;
+ cdns,tchsh-ns = <4>;
+ cdns,tslch-ns = <4>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ qspi_boot: partition@0 {
+ label = "Boot and fpga data";
+ reg = <0x0 0x4000000>;
+ };
+
+ qspi_rootfs: partition@4000000 {
+ label = "Root Filesystem - JFFS2";
+ reg = <0x4000000 0x4000000>;
+ };
+ };
+ };
+};
--
2.7.4
next reply other threads:[~2018-05-11 16:10 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-05-11 16:10 thor.thayer at linux.intel.com [this message]
2018-05-11 16:10 ` [PATCHv2] arm64: dts: stratix10: Add QSPI support for Stratix10 thor.thayer
2018-05-15 15:11 ` Dinh Nguyen
2018-05-15 15:11 ` Dinh Nguyen
2018-05-15 20:10 ` Thor Thayer
2018-05-15 20:10 ` Thor Thayer
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1526055052-11371-1-git-send-email-thor.thayer@linux.intel.com \
--to=thor.thayer@linux.intel.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.