Re: [PATCH 0/5] Enable an additional VMD device id

["Derrick, Jonathan" <jonathan.derrick@intel.com>]

[-- Attachment #1: Type: text/plain, Size: 2255 bytes --]

On Thu, 2018-05-24 at 17:34 +0100, Lorenzo Pieralisi wrote:
> On Thu, May 24, 2018 at 04:15:08PM +0000, Derrick, Jonathan wrote:
> > Hi Lorenzo,
> > 
> > On Thu, 2018-05-24 at 12:44 +0100, Lorenzo Pieralisi wrote:
> > > On Fri, May 18, 2018 at 01:27:57PM -0600, Jon Derrick wrote:
> > > > This patchset enables an additional VMD device ID to the VMD
> > > > driver
> > > > supporting assignment of the membar addresses from shadow
> > > > registers
> > > > and
> > > > allows more flexibility in assigning bus numbers to a VMD PCIe
> > > > domain.
> > > > Additional VMD root port device ids have been added to the VMD
> > > > AER
> > > > quirk.
> > > > 
> > > > Changes from rfc include comments, code structure, and using
> > > > pci_add_resource_offset to correctly assign addresses while
> > > > virtualized.
> > > > 
> > > > Applies to Bjorn's next branch
> > > 
> > > Hi Jon,
> > > 
> > > You should base it on v4.17-rc1 and if there is a dependency on
> > > later -rc* or a branch in Bjorn/my queue please let us know.
> > 
> > It looks like it applies cleanly to 4.17-rc1 and rc6.
> > 
> > > > Jon Derrick (5):
> > > >   PCI: Add Intel VMD devices to pci ids
> > > >   PCI/VMD: Assign membar addresses from shadow registers
> > > >   PCI/VMD: Add offset to bus numbers if necessary
> > > >   x86/PCI: Add additional VMD device root ports to VMD AER
> > > > quirk
> > > >   PCI/VMD: Add an additional VMD device id to driver device id
> > > > table
> > > > 
> > > >  arch/x86/pci/fixup.c    |  4 +++
> > > >  drivers/pci/host/vmd.c  | 91
> > > > +++++++++++++++++++++++++++++++++++++++++++------
> > > >  include/linux/pci_ids.h |  2 ++
> > > >  3 files changed, 87 insertions(+), 10 deletions(-)
> > > 
> > > I need Bjorn's ACK on patch (4), or if Bjorn is keen on pulling
> > > the
> > > series, here's mine on the series:
> > > 
> > > Acked-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
> > 
> > Would you like me to rebase it and resend with Bjorn's ack?
> 
> No need to resend but I need Bjorn's ACK on patch (4) in order to
> queue it.
> 
> Thanks,
> Lorenzo

Here's Bjorn's ack since you may not have it seen it yet:
https://patchwork.ozlabs.org/patch/916565/


Thanks,
Jon

[-- Attachment #2: smime.p7s --]
[-- Type: application/x-pkcs7-signature, Size: 3278 bytes --]