From: Paulo Zanoni <paulo.r.zanoni@intel.com>
To: "Chauhan, Madhav" <madhav.chauhan@intel.com>,
"intel-gfx@lists.freedesktop.org"
<intel-gfx@lists.freedesktop.org>
Cc: "Nikula, Jani" <jani.nikula@intel.com>,
"Vivi, Rodrigo" <rodrigo.vivi@intel.com>
Subject: Re: [PATCH 02/20] drm/i915/icl: Program DSI Escape clock Divider
Date: Fri, 15 Jun 2018 11:11:11 -0700 [thread overview]
Message-ID: <1529086271.2740.23.camel@intel.com> (raw)
In-Reply-To: <FDE0F82259988449BC0C053E4EF090C96EEE3D3F@BGSMSX104.gar.corp.intel.com>
Em Sex, 2018-06-15 às 23:30 +0530, Chauhan, Madhav escreveu:
> > -----Original Message-----
> > From: Zanoni, Paulo R
> > Sent: Friday, June 15, 2018 11:00 PM
> > To: Chauhan, Madhav <madhav.chauhan@intel.com>; intel-
> > gfx@lists.freedesktop.org
> > Cc: Nikula, Jani <jani.nikula@intel.com>; Shankar, Uma
> > <uma.shankar@intel.com>; Vivi, Rodrigo <rodrigo.vivi@intel.com>
> > Subject: Re: [PATCH 02/20] drm/i915/icl: Program DSI Escape clock
> > Divider
> >
> > Em Sex, 2018-06-15 às 15:51 +0530, Madhav Chauhan escreveu:
> > > Escape Clock is used for LP communication across the DSI Link. To
> > > achieve the constant frequency of the escape clock from the
> > > variable
> > > DPLL frequency output, a variable divider(M) is needed. This
> > > patch
> > > programs the same.
> > >
> > > Signed-off-by: Madhav Chauhan <madhav.chauhan@intel.com>
> > > ---
> > > drivers/gpu/drm/i915/Makefile | 1 +
> > > drivers/gpu/drm/i915/i915_reg.h | 1 +
> > > drivers/gpu/drm/i915/intel_dsi_new.c | 65
> > > ++++++++++++++++++++++++++++++++++++
> > > 3 files changed, 67 insertions(+)
> > > create mode 100644 drivers/gpu/drm/i915/intel_dsi_new.c
> > >
> > > diff --git a/drivers/gpu/drm/i915/Makefile
> > > b/drivers/gpu/drm/i915/Makefile index 4c6adae..a5f60c8 100644
> > > --- a/drivers/gpu/drm/i915/Makefile
> > > +++ b/drivers/gpu/drm/i915/Makefile
> > > @@ -142,6 +142,7 @@ i915-y += dvo_ch7017.o \
> > > intel_dp_mst.o \
> > > intel_dp.o \
> > > intel_dsi.o \
> > > + intel_dsi_new.o \
> > > intel_dsi_dcs_backlight.o \
> > > intel_dsi_pll.o \
> > > intel_dsi_vbt.o \
> > > diff --git a/drivers/gpu/drm/i915/i915_reg.h
> > > b/drivers/gpu/drm/i915/i915_reg.h index bf2d3e4..55ef57d 100644
> > > --- a/drivers/gpu/drm/i915/i915_reg.h
> > > +++ b/drivers/gpu/drm/i915/i915_reg.h
> > > @@ -9350,6 +9350,7 @@ enum skl_power_gate {
> > > _ICL_DPHY_ESC_CL
> > > K_DI
> > > V0, \
> > > _ICL_DPHY_ESC_CL
> > > K_DI
> > > V1)
> > > #define ICL_ESC_CLK_DIV_MASK 0x1ff
> > > +#define DSI_MAX_ESC_CLK 20000
> > > /* in KHz */
> > >
> > > /* Gen4+ Timestamp and Pipe Frame time stamp registers */
> > > #define GEN4_TIMESTAMP _MMIO(0x2358)
> > > diff --git a/drivers/gpu/drm/i915/intel_dsi_new.c
> > > b/drivers/gpu/drm/i915/intel_dsi_new.c
> > > new file mode 100644
> > > index 0000000..0d325ca
> > > --- /dev/null
> > > +++ b/drivers/gpu/drm/i915/intel_dsi_new.c
> > > @@ -0,0 +1,65 @@
> >
> > I am not a lawyer nor a license expert, but as far as I understand
> > (and I may
> > be wrong):
> >
> > > +// SPDX-License-Identifier: GPL-2.0+
> >
> > the line above...
>
> I was getting checkpatch warning and then I explored the options and
> found this.
> Looked at some of the recent files added (intel_hdcp.c) as well and
> they have this option .
>
> >
> > > +/*
> > > + * Copyright © 2018 Intel Corporation
> > > + *
> > > + * Permission is hereby granted, free of charge, to any person
> > > obtaining a
> > > + * copy of this software and associated documentation files (the
> > > "Software"),
> > > + * to deal in the Software without restriction, including
> > > without
> > > limitation
> > > + * the rights to use, copy, modify, merge, publish, distribute,
> > > sublicense,
> > > + * and/or sell copies of the Software, and to permit persons to
> > > whom
> > > the
> > > + * Software is furnished to do so, subject to the following
> > > conditions:
> > > + *
> > > + * The above copyright notice and this permission notice
> > > (including
> > > the next
> > > + * paragraph) shall be included in all copies or substantial
> > > portions of the
> > > + * Software.
> > > + *
> > > + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY
> >
> > KIND,
> > > EXPRESS OR
> > > + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
> > > MERCHANTABILITY,
> > > + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO
> > > EVENT SHALL
> > > + * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM,
> >
> > DAMAGES
> > > OR OTHER
> > > + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR
> >
> > OTHERWISE,
> > > ARISING
> > > + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE
> >
> > OR
> > > OTHER
> > > + * DEALINGS IN THE SOFTWARE.
> >
> > ... does not seem to match the license above.
>
> Can you please be more specific here??
Please read the two links I gave. The file has an SPDX identifier for
GPL-2.0+ but license text is the MIT license.
>
> Regards,
> Madhav
>
> >
> > https://www.kernel.org/doc/html/latest/process/license-rules.html
> >
> > https://spdx.org/
> >
> > Thanks,
> > Paulo
> >
> > > + *
> > > + * Authors:
> > > + * Madhav Chauhan <madhav.chauhan@intel.com>
> > > + * Jani Nikula <jani.nikula@intel.com>
> > > + */
> > > +
> > > +#include "intel_dsi.h"
> > > +
> > > +static void gen11_dsi_program_esc_clk_div(struct intel_encoder
> > > *encoder)
> > > +{
> > > + struct drm_i915_private *dev_priv = to_i915(encoder-
> > > > base.dev);
> > >
> > > + struct intel_dsi *intel_dsi = enc_to_intel_dsi(&encoder-
> > > > base);
> > >
> > > + enum port port;
> > > + u32 bpp = mipi_dsi_pixel_format_to_bpp(intel_dsi-
> > > > pixel_format);
> > >
> > > + u32 afe_clk_khz; /* 8X Clock */
> > > + u32 esc_clk_div_m;
> > > +
> > > + afe_clk_khz = DIV_ROUND_CLOSEST(intel_dsi->pclk * bpp,
> > > + intel_dsi->lane_count);
> > > +
> > > + esc_clk_div_m = DIV_ROUND_UP(afe_clk_khz,
> > > DSI_MAX_ESC_CLK);
> > > +
> > > + for_each_dsi_port(port, intel_dsi->ports) {
> > > + I915_WRITE(ICL_DSI_ESC_CLK_DIV(port),
> > > + esc_clk_div_m &
> > > ICL_ESC_CLK_DIV_MASK);
> > > + POSTING_READ(ICL_DSI_ESC_CLK_DIV(port));
> > > + }
> > > +
> > > + for_each_dsi_port(port, intel_dsi->ports) {
> > > + I915_WRITE(ICL_DPHY_ESC_CLK_DIV(port),
> > > + esc_clk_div_m &
> > > ICL_ESC_CLK_DIV_MASK);
> > > + POSTING_READ(ICL_DPHY_ESC_CLK_DIV(port));
> > > + }
> > > +}
> > > +
> > > +static void __attribute__((unused)) gen11_dsi_pre_enable(
> > > + struct intel_encoder *encoder,
> > > + const struct intel_crtc_state
> > > *pipe_config,
> > > + const struct drm_connector_state
> > > *conn_state)
> > > +{
> > > + /* step3: enable DSI PLL */
> > > + gen11_dsi_program_esc_clk_div(encoder);
> > > +}
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
next prev parent reply other threads:[~2018-06-15 18:11 UTC|newest]
Thread overview: 47+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-06-15 10:21 [PATCH 00/20] ICELAKE DSI DRIVER Madhav Chauhan
2018-06-15 10:21 ` [PATCH 01/20] drm/i915/icl: Define register for DSI PLL Madhav Chauhan
2018-06-29 11:43 ` Jani Nikula
2018-06-29 13:31 ` Chauhan, Madhav
2018-06-29 14:18 ` Jani Nikula
2018-06-15 10:21 ` [PATCH 02/20] drm/i915/icl: Program DSI Escape clock Divider Madhav Chauhan
2018-06-15 17:30 ` Paulo Zanoni
2018-06-15 18:00 ` Chauhan, Madhav
2018-06-15 18:11 ` Paulo Zanoni [this message]
2018-06-20 8:14 ` Chauhan, Madhav
2018-06-15 10:21 ` [PATCH 03/20] drm/i915/icl: Define DSI mode ctl register Madhav Chauhan
2018-06-29 11:51 ` Jani Nikula
2018-06-29 13:59 ` Chauhan, Madhav
2018-06-29 14:18 ` Jani Nikula
2018-06-15 10:21 ` [PATCH 04/20] drm/i915/icl: Enable DSI IO power Madhav Chauhan
2018-07-02 9:56 ` Jani Nikula
2018-07-02 10:03 ` Chauhan, Madhav
2018-07-02 10:22 ` Jani Nikula
2018-07-02 10:26 ` Chauhan, Madhav
2018-06-15 10:21 ` [PATCH 05/20] drm/i915/icl: Define PORT_CL_DW_10 register Madhav Chauhan
2018-06-29 13:53 ` Jani Nikula
2018-07-02 8:22 ` Chauhan, Madhav
2018-07-02 10:12 ` Jani Nikula
2018-07-02 10:17 ` Chauhan, Madhav
2018-06-15 10:21 ` [PATCH 06/20] drm/i915/icl: Power down unused DSI lanes Madhav Chauhan
2018-06-29 13:57 ` Jani Nikula
2018-07-02 12:42 ` Jani Nikula
2018-07-02 12:43 ` Chauhan, Madhav
2018-06-15 10:21 ` [PATCH 07/20] drm/i915/icl: Define AUX lane registers for Port A/B Madhav Chauhan
2018-06-15 10:21 ` [PATCH 08/20] drm/i915/icl: Configure lane sequencing of combo phy transmitter Madhav Chauhan
2018-06-15 10:21 ` [PATCH 09/20] drm/i915/icl: DSI vswing programming sequence Madhav Chauhan
2018-06-15 10:21 ` [PATCH 10/20] drm/i915/icl: Enable DDI Buffer Madhav Chauhan
2018-06-15 10:21 ` [PATCH 11/20] drm/i915/icl: Define T_INIT_MASTER registers Madhav Chauhan
2018-06-15 10:21 ` [PATCH 12/20] drm/i915/icl: Program " Madhav Chauhan
2018-06-15 10:21 ` [PATCH 13/20] drm/i915/icl: Define data/clock lanes dphy timing registers Madhav Chauhan
2018-06-15 10:21 ` [PATCH 14/20] drm/i915/icl: Program DSI clock and data lane timing params Madhav Chauhan
2018-06-15 10:21 ` [PATCH 15/20] drm/i915/icl: Define TA_TIMING_PARAM registers Madhav Chauhan
2018-06-15 10:21 ` [PATCH 16/20] drm/i915/icl: Program " Madhav Chauhan
2018-06-15 10:21 ` [PATCH 17/20] drm/i915/icl: Get DSI transcoder for a given port Madhav Chauhan
2018-06-15 10:21 ` [PATCH 18/20] drm/i915/icl: Add macros for MMIO of DSI transcoder registers Madhav Chauhan
2018-06-15 10:21 ` [PATCH 19/20] drm/i915/icl: Define TRANS_DSI_FUNC_CONF register Madhav Chauhan
2018-06-15 10:21 ` [PATCH 20/20] drm/i915/icl: Configure DSI transcoders Madhav Chauhan
2018-06-15 11:06 ` ✗ Fi.CI.CHECKPATCH: warning for ICELAKE DSI DRIVER Patchwork
2018-06-15 11:12 ` ✗ Fi.CI.SPARSE: " Patchwork
2018-06-15 11:21 ` ✓ Fi.CI.BAT: success " Patchwork
2018-06-15 18:14 ` ✓ Fi.CI.IGT: " Patchwork
2018-06-27 6:32 ` [PATCH 00/20] " Chauhan, Madhav
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1529086271.2740.23.camel@intel.com \
--to=paulo.r.zanoni@intel.com \
--cc=intel-gfx@lists.freedesktop.org \
--cc=jani.nikula@intel.com \
--cc=madhav.chauhan@intel.com \
--cc=rodrigo.vivi@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.