From: <gregkh@linuxfoundation.org>
To: penguin-kernel@I-love.SAKURA.ne.jp, gregkh@linuxfoundation.org,
peter@hurleysoftware.com, stable@vger.kernel.org,
syzbot+108696293d7a21ab688f@syzkaller.appspotmail.com
Subject: patch "n_tty: Access echo_* variables carefully." added to tty-linus
Date: Thu, 28 Jun 2018 21:31:51 +0900 [thread overview]
Message-ID: <1530189111168243@kroah.com> (raw)
This is a note to let you know that I've just added the patch titled
n_tty: Access echo_* variables carefully.
to my tty git tree which can be found at
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty.git
in the tty-linus branch.
The patch will show up in the next release of the linux-next tree
(usually sometime within the next 24 hours during the week.)
The patch will hopefully also be merged in Linus's tree for the
next -rc kernel release.
If you have any questions about this process, please let me know.
>From ebec3f8f5271139df618ebdf8427e24ba102ba94 Mon Sep 17 00:00:00 2001
From: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Date: Sat, 26 May 2018 09:53:14 +0900
Subject: n_tty: Access echo_* variables carefully.
syzbot is reporting stalls at __process_echoes() [1]. This is because
since ldata->echo_commit < ldata->echo_tail becomes true for some reason,
the discard loop is serving as almost infinite loop. This patch tries to
avoid falling into ldata->echo_commit < ldata->echo_tail situation by
making access to echo_* variables more carefully.
Since reset_buffer_flags() is called without output_lock held, it should
not touch echo_* variables. And omit a call to reset_buffer_flags() from
n_tty_open() by using vzalloc().
Since add_echo_byte() is called without output_lock held, it needs memory
barrier between storing into echo_buf[] and incrementing echo_head counter.
echo_buf() needs corresponding memory barrier before reading echo_buf[].
Lack of handling the possibility of not-yet-stored multi-byte operation
might be the reason of falling into ldata->echo_commit < ldata->echo_tail
situation, for if I do WARN_ON(ldata->echo_commit == tail + 1) prior to
echo_buf(ldata, tail + 1), the WARN_ON() fires.
Also, explicitly masking with buffer for the former "while" loop, and
use ldata->echo_commit > tail for the latter "while" loop.
[1] https://syzkaller.appspot.com/bug?id=17f23b094cd80df750e5b0f8982c521ee6bcbf40
Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Reported-by: syzbot <syzbot+108696293d7a21ab688f@syzkaller.appspotmail.com>
Cc: Peter Hurley <peter@hurleysoftware.com>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/tty/n_tty.c | 42 ++++++++++++++++++++++++------------------
1 file changed, 24 insertions(+), 18 deletions(-)
diff --git a/drivers/tty/n_tty.c b/drivers/tty/n_tty.c
index b279f8730e04..431742201709 100644
--- a/drivers/tty/n_tty.c
+++ b/drivers/tty/n_tty.c
@@ -143,6 +143,7 @@ static inline unsigned char *read_buf_addr(struct n_tty_data *ldata, size_t i)
static inline unsigned char echo_buf(struct n_tty_data *ldata, size_t i)
{
+ smp_rmb(); /* Matches smp_wmb() in add_echo_byte(). */
return ldata->echo_buf[i & (N_TTY_BUF_SIZE - 1)];
}
@@ -318,9 +319,7 @@ static inline void put_tty_queue(unsigned char c, struct n_tty_data *ldata)
static void reset_buffer_flags(struct n_tty_data *ldata)
{
ldata->read_head = ldata->canon_head = ldata->read_tail = 0;
- ldata->echo_head = ldata->echo_tail = ldata->echo_commit = 0;
ldata->commit_head = 0;
- ldata->echo_mark = 0;
ldata->line_start = 0;
ldata->erasing = 0;
@@ -619,12 +618,19 @@ static size_t __process_echoes(struct tty_struct *tty)
old_space = space = tty_write_room(tty);
tail = ldata->echo_tail;
- while (ldata->echo_commit != tail) {
+ while (MASK(ldata->echo_commit) != MASK(tail)) {
c = echo_buf(ldata, tail);
if (c == ECHO_OP_START) {
unsigned char op;
int no_space_left = 0;
+ /*
+ * Since add_echo_byte() is called without holding
+ * output_lock, we might see only portion of multi-byte
+ * operation.
+ */
+ if (MASK(ldata->echo_commit) == MASK(tail + 1))
+ goto not_yet_stored;
/*
* If the buffer byte is the start of a multi-byte
* operation, get the next byte, which is either the
@@ -636,6 +642,8 @@ static size_t __process_echoes(struct tty_struct *tty)
unsigned int num_chars, num_bs;
case ECHO_OP_ERASE_TAB:
+ if (MASK(ldata->echo_commit) == MASK(tail + 2))
+ goto not_yet_stored;
num_chars = echo_buf(ldata, tail + 2);
/*
@@ -730,7 +738,8 @@ static size_t __process_echoes(struct tty_struct *tty)
/* If the echo buffer is nearly full (so that the possibility exists
* of echo overrun before the next commit), then discard enough
* data at the tail to prevent a subsequent overrun */
- while (ldata->echo_commit - tail >= ECHO_DISCARD_WATERMARK) {
+ while (ldata->echo_commit > tail &&
+ ldata->echo_commit - tail >= ECHO_DISCARD_WATERMARK) {
if (echo_buf(ldata, tail) == ECHO_OP_START) {
if (echo_buf(ldata, tail + 1) == ECHO_OP_ERASE_TAB)
tail += 3;
@@ -740,6 +749,7 @@ static size_t __process_echoes(struct tty_struct *tty)
tail++;
}
+ not_yet_stored:
ldata->echo_tail = tail;
return old_space - space;
}
@@ -750,6 +760,7 @@ static void commit_echoes(struct tty_struct *tty)
size_t nr, old, echoed;
size_t head;
+ mutex_lock(&ldata->output_lock);
head = ldata->echo_head;
ldata->echo_mark = head;
old = ldata->echo_commit - ldata->echo_tail;
@@ -758,10 +769,12 @@ static void commit_echoes(struct tty_struct *tty)
* is over the threshold (and try again each time another
* block is accumulated) */
nr = head - ldata->echo_tail;
- if (nr < ECHO_COMMIT_WATERMARK || (nr % ECHO_BLOCK > old % ECHO_BLOCK))
+ if (nr < ECHO_COMMIT_WATERMARK ||
+ (nr % ECHO_BLOCK > old % ECHO_BLOCK)) {
+ mutex_unlock(&ldata->output_lock);
return;
+ }
- mutex_lock(&ldata->output_lock);
ldata->echo_commit = head;
echoed = __process_echoes(tty);
mutex_unlock(&ldata->output_lock);
@@ -812,7 +825,9 @@ static void flush_echoes(struct tty_struct *tty)
static inline void add_echo_byte(unsigned char c, struct n_tty_data *ldata)
{
- *echo_buf_addr(ldata, ldata->echo_head++) = c;
+ *echo_buf_addr(ldata, ldata->echo_head) = c;
+ smp_wmb(); /* Matches smp_rmb() in echo_buf(). */
+ ldata->echo_head++;
}
/**
@@ -1881,30 +1896,21 @@ static int n_tty_open(struct tty_struct *tty)
struct n_tty_data *ldata;
/* Currently a malloc failure here can panic */
- ldata = vmalloc(sizeof(*ldata));
+ ldata = vzalloc(sizeof(*ldata));
if (!ldata)
- goto err;
+ return -ENOMEM;
ldata->overrun_time = jiffies;
mutex_init(&ldata->atomic_read_lock);
mutex_init(&ldata->output_lock);
tty->disc_data = ldata;
- reset_buffer_flags(tty->disc_data);
- ldata->column = 0;
- ldata->canon_column = 0;
- ldata->num_overrun = 0;
- ldata->no_room = 0;
- ldata->lnext = 0;
tty->closing = 0;
/* indicate buffer work may resume */
clear_bit(TTY_LDISC_HALTED, &tty->flags);
n_tty_set_termios(tty, NULL);
tty_unthrottle(tty);
-
return 0;
-err:
- return -ENOMEM;
}
static inline int input_available_p(struct tty_struct *tty, int poll)
--
2.18.0
reply other threads:[~2018-06-28 13:04 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1530189111168243@kroah.com \
--to=gregkh@linuxfoundation.org \
--cc=penguin-kernel@I-love.SAKURA.ne.jp \
--cc=peter@hurleysoftware.com \
--cc=stable@vger.kernel.org \
--cc=syzbot+108696293d7a21ab688f@syzkaller.appspotmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.