[PATCH v12 2/8] i2c: Add FSI-attached I2C master algorithm

[Eddie James <eajames@linux.vnet.ibm.com>]

From: "eajames@linux.vnet.ibm.com" <eajames@linux.vnet.ibm.com>

Add register definitions for FSI-attached I2C master and functions to
access those registers over FSI. Add an FSI driver so that our I2C bus
is probed up during an FSI scan.

Signed-off-by: Eddie James <eajames@linux.vnet.ibm.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
---
 drivers/i2c/busses/Kconfig   |  11 ++
 drivers/i2c/busses/Makefile  |   1 +
 drivers/i2c/busses/i2c-fsi.c | 239 +++++++++++++++++++++++++++++++++++++++++++
 3 files changed, 251 insertions(+)
 create mode 100644 drivers/i2c/busses/i2c-fsi.c

diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig
index e7a4d28..48b5de7 100644
--- a/drivers/i2c/busses/Kconfig
+++ b/drivers/i2c/busses/Kconfig
@@ -1327,4 +1327,15 @@ config I2C_ZX2967
 	  This driver can also be built as a module. If so, the module will be
 	  called i2c-zx2967.
 
+config I2C_FSI
+	tristate "FSI I2C driver"
+	depends on FSI
+	help
+	  Driver for FSI bus attached I2C masters. These are I2C masters that
+	  are connected to the system over an FSI bus, instead of the more
+	  common PCI or MMIO interface.
+
+	  This driver can also be built as a module. If so, the module will be
+	  called as i2c-fsi.
+
 endmenu
diff --git a/drivers/i2c/busses/Makefile b/drivers/i2c/busses/Makefile
index 5a86914..4909fd6 100644
--- a/drivers/i2c/busses/Makefile
+++ b/drivers/i2c/busses/Makefile
@@ -137,5 +137,6 @@ obj-$(CONFIG_I2C_PCA_ISA)	+= i2c-pca-isa.o
 obj-$(CONFIG_I2C_SIBYTE)	+= i2c-sibyte.o
 obj-$(CONFIG_I2C_XGENE_SLIMPRO) += i2c-xgene-slimpro.o
 obj-$(CONFIG_SCx200_ACB)	+= scx200_acb.o
+obj-$(CONFIG_I2C_FSI)		+= i2c-fsi.o
 
 ccflags-$(CONFIG_I2C_DEBUG_BUS) := -DDEBUG
diff --git a/drivers/i2c/busses/i2c-fsi.c b/drivers/i2c/busses/i2c-fsi.c
new file mode 100644
index 0000000..3725db1
--- /dev/null
+++ b/drivers/i2c/busses/i2c-fsi.c
@@ -0,0 +1,239 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * FSI-attached I2C master algorithm
+ *
+ * Copyright 2018 IBM Corporation
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#include <linux/bitfield.h>
+#include <linux/bitops.h>
+#include <linux/device.h>
+#include <linux/errno.h>
+#include <linux/fsi.h>
+#include <linux/i2c.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+
+#define FSI_ENGID_I2C		0x7
+
+#define I2C_DEFAULT_CLK_DIV	6
+
+/* i2c registers */
+#define I2C_FSI_FIFO		0x00
+#define I2C_FSI_CMD		0x04
+#define I2C_FSI_MODE		0x08
+#define I2C_FSI_WATER_MARK	0x0C
+#define I2C_FSI_INT_MASK	0x10
+#define I2C_FSI_INT_COND	0x14
+#define I2C_FSI_OR_INT_MASK	0x14
+#define I2C_FSI_INTS		0x18
+#define I2C_FSI_AND_INT_MASK	0x18
+#define I2C_FSI_STAT		0x1C
+#define I2C_FSI_RESET_I2C	0x1C
+#define I2C_FSI_ESTAT		0x20
+#define I2C_FSI_RESET_ERR	0x20
+#define I2C_FSI_RESID_LEN	0x24
+#define I2C_FSI_SET_SCL		0x24
+#define I2C_FSI_PORT_BUSY	0x28
+#define I2C_FSI_RESET_SCL	0x2C
+#define I2C_FSI_SET_SDA		0x30
+#define I2C_FSI_RESET_SDA	0x34
+
+/* cmd register */
+#define I2C_CMD_WITH_START	BIT(31)
+#define I2C_CMD_WITH_ADDR	BIT(30)
+#define I2C_CMD_RD_CONT		BIT(29)
+#define I2C_CMD_WITH_STOP	BIT(28)
+#define I2C_CMD_FORCELAUNCH	BIT(27)
+#define I2C_CMD_ADDR		GENMASK(23, 17)
+#define I2C_CMD_READ		BIT(16)
+#define I2C_CMD_LEN		GENMASK(15, 0)
+
+/* mode register */
+#define I2C_MODE_CLKDIV		GENMASK(31, 16)
+#define I2C_MODE_PORT		GENMASK(15, 10)
+#define I2C_MODE_ENHANCED	BIT(3)
+#define I2C_MODE_DIAG		BIT(2)
+#define I2C_MODE_PACE_ALLOW	BIT(1)
+#define I2C_MODE_WRAP		BIT(0)
+
+/* watermark register */
+#define I2C_WATERMARK_HI	GENMASK(15, 12)
+#define I2C_WATERMARK_LO	GENMASK(7, 4)
+
+#define I2C_FIFO_HI_LVL		4
+#define I2C_FIFO_LO_LVL		4
+
+/* interrupt register */
+#define I2C_INT_INV_CMD		BIT(15)
+#define I2C_INT_PARITY		BIT(14)
+#define I2C_INT_BE_OVERRUN	BIT(13)
+#define I2C_INT_BE_ACCESS	BIT(12)
+#define I2C_INT_LOST_ARB	BIT(11)
+#define I2C_INT_NACK		BIT(10)
+#define I2C_INT_DAT_REQ		BIT(9)
+#define I2C_INT_CMD_COMP	BIT(8)
+#define I2C_INT_STOP_ERR	BIT(7)
+#define I2C_INT_BUSY		BIT(6)
+#define I2C_INT_IDLE		BIT(5)
+
+/* status register */
+#define I2C_STAT_INV_CMD	BIT(31)
+#define I2C_STAT_PARITY		BIT(30)
+#define I2C_STAT_BE_OVERRUN	BIT(29)
+#define I2C_STAT_BE_ACCESS	BIT(28)
+#define I2C_STAT_LOST_ARB	BIT(27)
+#define I2C_STAT_NACK		BIT(26)
+#define I2C_STAT_DAT_REQ	BIT(25)
+#define I2C_STAT_CMD_COMP	BIT(24)
+#define I2C_STAT_STOP_ERR	BIT(23)
+#define I2C_STAT_MAX_PORT	GENMASK(19, 16)
+#define I2C_STAT_ANY_INT	BIT(15)
+#define I2C_STAT_SCL_IN		BIT(11)
+#define I2C_STAT_SDA_IN		BIT(10)
+#define I2C_STAT_PORT_BUSY	BIT(9)
+#define I2C_STAT_SELF_BUSY	BIT(8)
+#define I2C_STAT_FIFO_COUNT	GENMASK(7, 0)
+
+#define I2C_STAT_ERR		(I2C_STAT_INV_CMD |			\
+				 I2C_STAT_PARITY |			\
+				 I2C_STAT_BE_OVERRUN |			\
+				 I2C_STAT_BE_ACCESS |			\
+				 I2C_STAT_LOST_ARB |			\
+				 I2C_STAT_NACK |			\
+				 I2C_STAT_STOP_ERR)
+#define I2C_STAT_ANY_RESP	(I2C_STAT_ERR |				\
+				 I2C_STAT_DAT_REQ |			\
+				 I2C_STAT_CMD_COMP)
+
+/* extended status register */
+#define I2C_ESTAT_FIFO_SZ	GENMASK(31, 24)
+#define I2C_ESTAT_SCL_IN_SY	BIT(15)
+#define I2C_ESTAT_SDA_IN_SY	BIT(14)
+#define I2C_ESTAT_S_SCL		BIT(13)
+#define I2C_ESTAT_S_SDA		BIT(12)
+#define I2C_ESTAT_M_SCL		BIT(11)
+#define I2C_ESTAT_M_SDA		BIT(10)
+#define I2C_ESTAT_HI_WATER	BIT(9)
+#define I2C_ESTAT_LO_WATER	BIT(8)
+#define I2C_ESTAT_PORT_BUSY	BIT(7)
+#define I2C_ESTAT_SELF_BUSY	BIT(6)
+#define I2C_ESTAT_VERSION	GENMASK(4, 0)
+
+struct fsi_i2c_master {
+	struct fsi_device	*fsi;
+	u8			fifo_size;
+};
+
+static int fsi_i2c_read_reg(struct fsi_device *fsi, unsigned int reg,
+			    u32 *data)
+{
+	int rc;
+	__be32 data_be;
+
+	rc = fsi_device_read(fsi, reg, &data_be, sizeof(data_be));
+	if (rc)
+		return rc;
+
+	*data = be32_to_cpu(data_be);
+
+	return 0;
+}
+
+static int fsi_i2c_write_reg(struct fsi_device *fsi, unsigned int reg,
+			     u32 *data)
+{
+	__be32 data_be = cpu_to_be32p(data);
+
+	return fsi_device_write(fsi, reg, &data_be, sizeof(data_be));
+}
+
+static int fsi_i2c_dev_init(struct fsi_i2c_master *i2c)
+{
+	int rc;
+	u32 mode = I2C_MODE_ENHANCED, extended_status, watermark;
+	u32 interrupt = 0;
+
+	/* since we use polling, disable interrupts */
+	rc = fsi_i2c_write_reg(i2c->fsi, I2C_FSI_INT_MASK, &interrupt);
+	if (rc)
+		return rc;
+
+	mode |= FIELD_PREP(I2C_MODE_CLKDIV, I2C_DEFAULT_CLK_DIV);
+	rc = fsi_i2c_write_reg(i2c->fsi, I2C_FSI_MODE, &mode);
+	if (rc)
+		return rc;
+
+	rc = fsi_i2c_read_reg(i2c->fsi, I2C_FSI_ESTAT, &extended_status);
+	if (rc)
+		return rc;
+
+	i2c->fifo_size = FIELD_GET(I2C_ESTAT_FIFO_SZ, extended_status);
+	watermark = FIELD_PREP(I2C_WATERMARK_HI,
+			       i2c->fifo_size - I2C_FIFO_HI_LVL);
+	watermark |= FIELD_PREP(I2C_WATERMARK_LO, I2C_FIFO_LO_LVL);
+
+	return fsi_i2c_write_reg(i2c->fsi, I2C_FSI_WATER_MARK, &watermark);
+}
+
+static int fsi_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg *msgs,
+			int num)
+{
+	return -EOPNOTSUPP;
+}
+
+static u32 fsi_i2c_functionality(struct i2c_adapter *adap)
+{
+	return I2C_FUNC_I2C | I2C_FUNC_PROTOCOL_MANGLING |
+		I2C_FUNC_SMBUS_EMUL | I2C_FUNC_SMBUS_BLOCK_DATA;
+}
+
+static const struct i2c_algorithm fsi_i2c_algorithm = {
+	.master_xfer = fsi_i2c_xfer,
+	.functionality = fsi_i2c_functionality,
+};
+
+static int fsi_i2c_probe(struct device *dev)
+{
+	struct fsi_i2c_master *i2c;
+	int rc;
+
+	i2c = devm_kzalloc(dev, sizeof(*i2c), GFP_KERNEL);
+	if (!i2c)
+		return -ENOMEM;
+
+	i2c->fsi = to_fsi_dev(dev);
+
+	rc = fsi_i2c_dev_init(i2c);
+	if (rc)
+		return rc;
+
+	dev_set_drvdata(dev, i2c);
+
+	return 0;
+}
+
+static const struct fsi_device_id fsi_i2c_ids[] = {
+	{ FSI_ENGID_I2C, FSI_VERSION_ANY },
+	{ }
+};
+
+static struct fsi_driver fsi_i2c_driver = {
+	.id_table = fsi_i2c_ids,
+	.drv = {
+		.name = "i2c-fsi",
+		.bus = &fsi_bus_type,
+		.probe = fsi_i2c_probe,
+	},
+};
+
+module_fsi_driver(fsi_i2c_driver);
+
+MODULE_AUTHOR("Eddie James <eajames@us.ibm.com>");
+MODULE_DESCRIPTION("FSI attached I2C master");
+MODULE_LICENSE("GPL");
-- 
1.8.3.1