From: Bryan Whitehead <Bryan.Whitehead@microchip.com>
To: <davem@davemloft.net>
Cc: <netdev@vger.kernel.org>, <UNGLinuxDriver@microchip.com>
Subject: [PATCH v4 net-next 6/8] lan743x: Add power management support
Date: Mon, 23 Jul 2018 16:16:31 -0400 [thread overview]
Message-ID: <1532376993-20765-7-git-send-email-Bryan.Whitehead@microchip.com> (raw)
In-Reply-To: <1532376993-20765-1-git-send-email-Bryan.Whitehead@microchip.com>
Implement power management
Supports suspend, resume, and Wake on LAN
Signed-off-by: Bryan Whitehead <Bryan.Whitehead@microchip.com>
---
drivers/net/ethernet/microchip/lan743x_ethtool.c | 47 ++++++
drivers/net/ethernet/microchip/lan743x_main.c | 176 +++++++++++++++++++++++
drivers/net/ethernet/microchip/lan743x_main.h | 47 ++++++
3 files changed, 270 insertions(+)
diff --git a/drivers/net/ethernet/microchip/lan743x_ethtool.c b/drivers/net/ethernet/microchip/lan743x_ethtool.c
index f9ad237..56b45aa 100644
--- a/drivers/net/ethernet/microchip/lan743x_ethtool.c
+++ b/drivers/net/ethernet/microchip/lan743x_ethtool.c
@@ -415,6 +415,49 @@ static int lan743x_ethtool_get_sset_count(struct net_device *netdev, int sset)
}
}
+#ifdef CONFIG_PM
+static void lan743x_ethtool_get_wol(struct net_device *netdev,
+ struct ethtool_wolinfo *wol)
+{
+ struct lan743x_adapter *adapter = netdev_priv(netdev);
+
+ wol->supported = 0;
+ wol->wolopts = 0;
+ phy_ethtool_get_wol(netdev->phydev, wol);
+
+ wol->supported |= WAKE_BCAST | WAKE_UCAST | WAKE_MCAST |
+ WAKE_MAGIC | WAKE_PHY | WAKE_ARP;
+
+ wol->wolopts |= adapter->wolopts;
+}
+
+static int lan743x_ethtool_set_wol(struct net_device *netdev,
+ struct ethtool_wolinfo *wol)
+{
+ struct lan743x_adapter *adapter = netdev_priv(netdev);
+
+ adapter->wolopts = 0;
+ if (wol->wolopts & WAKE_UCAST)
+ adapter->wolopts |= WAKE_UCAST;
+ if (wol->wolopts & WAKE_MCAST)
+ adapter->wolopts |= WAKE_MCAST;
+ if (wol->wolopts & WAKE_BCAST)
+ adapter->wolopts |= WAKE_BCAST;
+ if (wol->wolopts & WAKE_MAGIC)
+ adapter->wolopts |= WAKE_MAGIC;
+ if (wol->wolopts & WAKE_PHY)
+ adapter->wolopts |= WAKE_PHY;
+ if (wol->wolopts & WAKE_ARP)
+ adapter->wolopts |= WAKE_ARP;
+
+ device_set_wakeup_enable(&adapter->pdev->dev, (bool)wol->wolopts);
+
+ phy_ethtool_set_wol(netdev->phydev, wol);
+
+ return 0;
+}
+#endif /* CONFIG_PM */
+
const struct ethtool_ops lan743x_ethtool_ops = {
.get_drvinfo = lan743x_ethtool_get_drvinfo,
.get_msglevel = lan743x_ethtool_get_msglevel,
@@ -429,4 +472,8 @@ const struct ethtool_ops lan743x_ethtool_ops = {
.get_sset_count = lan743x_ethtool_get_sset_count,
.get_link_ksettings = phy_ethtool_get_link_ksettings,
.set_link_ksettings = phy_ethtool_set_link_ksettings,
+#ifdef CONFIG_PM
+ .get_wol = lan743x_ethtool_get_wol,
+ .set_wol = lan743x_ethtool_set_wol,
+#endif
};
diff --git a/drivers/net/ethernet/microchip/lan743x_main.c b/drivers/net/ethernet/microchip/lan743x_main.c
index 1e2f8c6..30178f8 100644
--- a/drivers/net/ethernet/microchip/lan743x_main.c
+++ b/drivers/net/ethernet/microchip/lan743x_main.c
@@ -11,6 +11,7 @@
#include <linux/phy.h>
#include <linux/rtnetlink.h>
#include <linux/iopoll.h>
+#include <linux/crc16.h>
#include "lan743x_main.h"
#include "lan743x_ethtool.h"
@@ -2749,10 +2750,182 @@ static void lan743x_pcidev_shutdown(struct pci_dev *pdev)
lan743x_netdev_close(netdev);
rtnl_unlock();
+#ifdef CONFIG_PM
+ pci_save_state(pdev);
+#endif
+
/* clean up lan743x portion */
lan743x_hardware_cleanup(adapter);
}
+#ifdef CONFIG_PM
+static u16 lan743x_pm_wakeframe_crc16(const u8 *buf, int len)
+{
+ return bitrev16(crc16(0xFFFF, buf, len));
+}
+
+static void lan743x_pm_set_wol(struct lan743x_adapter *adapter)
+{
+ const u8 ipv4_multicast[3] = { 0x01, 0x00, 0x5E };
+ const u8 ipv6_multicast[3] = { 0x33, 0x33 };
+ const u8 arp_type[2] = { 0x08, 0x06 };
+ int mask_index;
+ u32 pmtctl;
+ u32 wucsr;
+ u32 macrx;
+ u16 crc;
+
+ for (mask_index = 0; mask_index < MAC_NUM_OF_WUF_CFG; mask_index++)
+ lan743x_csr_write(adapter, MAC_WUF_CFG(mask_index), 0);
+
+ /* clear wake settings */
+ pmtctl = lan743x_csr_read(adapter, PMT_CTL);
+ pmtctl |= PMT_CTL_WUPS_MASK_;
+ pmtctl &= ~(PMT_CTL_GPIO_WAKEUP_EN_ | PMT_CTL_EEE_WAKEUP_EN_ |
+ PMT_CTL_WOL_EN_ | PMT_CTL_MAC_D3_RX_CLK_OVR_ |
+ PMT_CTL_RX_FCT_RFE_D3_CLK_OVR_ | PMT_CTL_ETH_PHY_WAKE_EN_);
+
+ macrx = lan743x_csr_read(adapter, MAC_RX);
+
+ wucsr = 0;
+ mask_index = 0;
+
+ pmtctl |= PMT_CTL_ETH_PHY_D3_COLD_OVR_ | PMT_CTL_ETH_PHY_D3_OVR_;
+
+ if (adapter->wolopts & WAKE_PHY) {
+ pmtctl |= PMT_CTL_ETH_PHY_EDPD_PLL_CTL_;
+ pmtctl |= PMT_CTL_ETH_PHY_WAKE_EN_;
+ }
+ if (adapter->wolopts & WAKE_MAGIC) {
+ wucsr |= MAC_WUCSR_MPEN_;
+ macrx |= MAC_RX_RXEN_;
+ pmtctl |= PMT_CTL_WOL_EN_ | PMT_CTL_MAC_D3_RX_CLK_OVR_;
+ }
+ if (adapter->wolopts & WAKE_UCAST) {
+ wucsr |= MAC_WUCSR_RFE_WAKE_EN_ | MAC_WUCSR_PFDA_EN_;
+ macrx |= MAC_RX_RXEN_;
+ pmtctl |= PMT_CTL_WOL_EN_ | PMT_CTL_MAC_D3_RX_CLK_OVR_;
+ pmtctl |= PMT_CTL_RX_FCT_RFE_D3_CLK_OVR_;
+ }
+ if (adapter->wolopts & WAKE_BCAST) {
+ wucsr |= MAC_WUCSR_RFE_WAKE_EN_ | MAC_WUCSR_BCST_EN_;
+ macrx |= MAC_RX_RXEN_;
+ pmtctl |= PMT_CTL_WOL_EN_ | PMT_CTL_MAC_D3_RX_CLK_OVR_;
+ pmtctl |= PMT_CTL_RX_FCT_RFE_D3_CLK_OVR_;
+ }
+ if (adapter->wolopts & WAKE_MCAST) {
+ /* IPv4 multicast */
+ crc = lan743x_pm_wakeframe_crc16(ipv4_multicast, 3);
+ lan743x_csr_write(adapter, MAC_WUF_CFG(mask_index),
+ MAC_WUF_CFG_EN_ | MAC_WUF_CFG_TYPE_MCAST_ |
+ (0 << MAC_WUF_CFG_OFFSET_SHIFT_) |
+ (crc & MAC_WUF_CFG_CRC16_MASK_));
+ lan743x_csr_write(adapter, MAC_WUF_MASK0(mask_index), 7);
+ lan743x_csr_write(adapter, MAC_WUF_MASK1(mask_index), 0);
+ lan743x_csr_write(adapter, MAC_WUF_MASK2(mask_index), 0);
+ lan743x_csr_write(adapter, MAC_WUF_MASK3(mask_index), 0);
+ mask_index++;
+
+ /* IPv6 multicast */
+ crc = lan743x_pm_wakeframe_crc16(ipv6_multicast, 2);
+ lan743x_csr_write(adapter, MAC_WUF_CFG(mask_index),
+ MAC_WUF_CFG_EN_ | MAC_WUF_CFG_TYPE_MCAST_ |
+ (0 << MAC_WUF_CFG_OFFSET_SHIFT_) |
+ (crc & MAC_WUF_CFG_CRC16_MASK_));
+ lan743x_csr_write(adapter, MAC_WUF_MASK0(mask_index), 3);
+ lan743x_csr_write(adapter, MAC_WUF_MASK1(mask_index), 0);
+ lan743x_csr_write(adapter, MAC_WUF_MASK2(mask_index), 0);
+ lan743x_csr_write(adapter, MAC_WUF_MASK3(mask_index), 0);
+ mask_index++;
+
+ wucsr |= MAC_WUCSR_RFE_WAKE_EN_ | MAC_WUCSR_WAKE_EN_;
+ macrx |= MAC_RX_RXEN_;
+ pmtctl |= PMT_CTL_WOL_EN_ | PMT_CTL_MAC_D3_RX_CLK_OVR_;
+ pmtctl |= PMT_CTL_RX_FCT_RFE_D3_CLK_OVR_;
+ }
+ if (adapter->wolopts & WAKE_ARP) {
+ /* set MAC_WUF_CFG & WUF_MASK
+ * for packettype (offset 12,13) = ARP (0x0806)
+ */
+ crc = lan743x_pm_wakeframe_crc16(arp_type, 2);
+ lan743x_csr_write(adapter, MAC_WUF_CFG(mask_index),
+ MAC_WUF_CFG_EN_ | MAC_WUF_CFG_TYPE_ALL_ |
+ (0 << MAC_WUF_CFG_OFFSET_SHIFT_) |
+ (crc & MAC_WUF_CFG_CRC16_MASK_));
+ lan743x_csr_write(adapter, MAC_WUF_MASK0(mask_index), 0x3000);
+ lan743x_csr_write(adapter, MAC_WUF_MASK1(mask_index), 0);
+ lan743x_csr_write(adapter, MAC_WUF_MASK2(mask_index), 0);
+ lan743x_csr_write(adapter, MAC_WUF_MASK3(mask_index), 0);
+ mask_index++;
+
+ wucsr |= MAC_WUCSR_RFE_WAKE_EN_ | MAC_WUCSR_WAKE_EN_;
+ macrx |= MAC_RX_RXEN_;
+ pmtctl |= PMT_CTL_WOL_EN_ | PMT_CTL_MAC_D3_RX_CLK_OVR_;
+ pmtctl |= PMT_CTL_RX_FCT_RFE_D3_CLK_OVR_;
+ }
+
+ lan743x_csr_write(adapter, MAC_WUCSR, wucsr);
+ lan743x_csr_write(adapter, PMT_CTL, pmtctl);
+ lan743x_csr_write(adapter, MAC_RX, macrx);
+}
+
+static int lan743x_pm_suspend(struct device *dev)
+{
+ struct pci_dev *pdev = to_pci_dev(dev);
+ struct net_device *netdev = pci_get_drvdata(pdev);
+ struct lan743x_adapter *adapter = netdev_priv(netdev);
+ int ret;
+
+ lan743x_pcidev_shutdown(pdev);
+
+ /* clear all wakes */
+ lan743x_csr_write(adapter, MAC_WUCSR, 0);
+ lan743x_csr_write(adapter, MAC_WUCSR2, 0);
+ lan743x_csr_write(adapter, MAC_WK_SRC, 0xFFFFFFFF);
+
+ if (adapter->wolopts)
+ lan743x_pm_set_wol(adapter);
+
+ /* Host sets PME_En, put D3hot */
+ ret = pci_prepare_to_sleep(pdev);
+
+ return 0;
+}
+
+static int lan743x_pm_resume(struct device *dev)
+{
+ struct pci_dev *pdev = to_pci_dev(dev);
+ struct net_device *netdev = pci_get_drvdata(pdev);
+ struct lan743x_adapter *adapter = netdev_priv(netdev);
+ int ret;
+
+ pci_set_power_state(pdev, PCI_D0);
+ pci_restore_state(pdev);
+ pci_save_state(pdev);
+
+ ret = lan743x_hardware_init(adapter, pdev);
+ if (ret) {
+ netif_err(adapter, probe, adapter->netdev,
+ "lan743x_hardware_init returned %d\n", ret);
+ }
+
+ /* open netdev when netdev is at running state while resume.
+ * For instance, it is true when system wakesup after pm-suspend
+ * However, it is false when system wakes up after suspend GUI menu
+ */
+ if (netif_running(netdev))
+ lan743x_netdev_open(netdev);
+
+ netif_device_attach(netdev);
+
+ return 0;
+}
+
+const struct dev_pm_ops lan743x_pm_ops = {
+ SET_SYSTEM_SLEEP_PM_OPS(lan743x_pm_suspend, lan743x_pm_resume)
+};
+#endif /*CONFIG_PM */
+
static const struct pci_device_id lan743x_pcidev_tbl[] = {
{ PCI_DEVICE(PCI_VENDOR_ID_SMSC, PCI_DEVICE_ID_SMSC_LAN7430) },
{ 0, }
@@ -2763,6 +2936,9 @@ static struct pci_driver lan743x_pcidev_driver = {
.id_table = lan743x_pcidev_tbl,
.probe = lan743x_pcidev_probe,
.remove = lan743x_pcidev_remove,
+#ifdef CONFIG_PM
+ .driver.pm = &lan743x_pm_ops,
+#endif
.shutdown = lan743x_pcidev_shutdown,
};
diff --git a/drivers/net/ethernet/microchip/lan743x_main.h b/drivers/net/ethernet/microchip/lan743x_main.h
index c026b8d..72b9beb 100644
--- a/drivers/net/ethernet/microchip/lan743x_main.h
+++ b/drivers/net/ethernet/microchip/lan743x_main.h
@@ -24,8 +24,18 @@
#define HW_CFG_LRST_ BIT(1)
#define PMT_CTL (0x014)
+#define PMT_CTL_ETH_PHY_D3_COLD_OVR_ BIT(27)
+#define PMT_CTL_MAC_D3_RX_CLK_OVR_ BIT(25)
+#define PMT_CTL_ETH_PHY_EDPD_PLL_CTL_ BIT(24)
+#define PMT_CTL_ETH_PHY_D3_OVR_ BIT(23)
+#define PMT_CTL_RX_FCT_RFE_D3_CLK_OVR_ BIT(18)
+#define PMT_CTL_GPIO_WAKEUP_EN_ BIT(15)
+#define PMT_CTL_EEE_WAKEUP_EN_ BIT(13)
#define PMT_CTL_READY_ BIT(7)
#define PMT_CTL_ETH_PHY_RST_ BIT(4)
+#define PMT_CTL_WOL_EN_ BIT(3)
+#define PMT_CTL_ETH_PHY_WAKE_EN_ BIT(2)
+#define PMT_CTL_WUPS_MASK_ (0x00000003)
#define DP_SEL (0x024)
#define DP_SEL_DPRDY_ BIT(31)
@@ -107,6 +117,38 @@
#define MAC_MII_DATA (0x124)
+#define MAC_WUCSR (0x140)
+#define MAC_WUCSR_RFE_WAKE_EN_ BIT(14)
+#define MAC_WUCSR_PFDA_EN_ BIT(3)
+#define MAC_WUCSR_WAKE_EN_ BIT(2)
+#define MAC_WUCSR_MPEN_ BIT(1)
+#define MAC_WUCSR_BCST_EN_ BIT(0)
+
+#define MAC_WK_SRC (0x144)
+
+#define MAC_WUF_CFG0 (0x150)
+#define MAC_NUM_OF_WUF_CFG (32)
+#define MAC_WUF_CFG_BEGIN (MAC_WUF_CFG0)
+#define MAC_WUF_CFG(index) (MAC_WUF_CFG_BEGIN + (4 * (index)))
+#define MAC_WUF_CFG_EN_ BIT(31)
+#define MAC_WUF_CFG_TYPE_MCAST_ (0x02000000)
+#define MAC_WUF_CFG_TYPE_ALL_ (0x01000000)
+#define MAC_WUF_CFG_OFFSET_SHIFT_ (16)
+#define MAC_WUF_CFG_CRC16_MASK_ (0x0000FFFF)
+
+#define MAC_WUF_MASK0_0 (0x200)
+#define MAC_WUF_MASK0_1 (0x204)
+#define MAC_WUF_MASK0_2 (0x208)
+#define MAC_WUF_MASK0_3 (0x20C)
+#define MAC_WUF_MASK0_BEGIN (MAC_WUF_MASK0_0)
+#define MAC_WUF_MASK1_BEGIN (MAC_WUF_MASK0_1)
+#define MAC_WUF_MASK2_BEGIN (MAC_WUF_MASK0_2)
+#define MAC_WUF_MASK3_BEGIN (MAC_WUF_MASK0_3)
+#define MAC_WUF_MASK0(index) (MAC_WUF_MASK0_BEGIN + (0x10 * (index)))
+#define MAC_WUF_MASK1(index) (MAC_WUF_MASK1_BEGIN + (0x10 * (index)))
+#define MAC_WUF_MASK2(index) (MAC_WUF_MASK2_BEGIN + (0x10 * (index)))
+#define MAC_WUF_MASK3(index) (MAC_WUF_MASK3_BEGIN + (0x10 * (index)))
+
/* offset 0x400 - 0x500, x may range from 0 to 32, for a total of 33 entries */
#define RFE_ADDR_FILT_HI(x) (0x400 + (8 * (x)))
#define RFE_ADDR_FILT_HI_VALID_ BIT(31)
@@ -121,6 +163,8 @@
#define RFE_CTL_MCAST_HASH_ BIT(3)
#define RFE_CTL_DA_PERFECT_ BIT(1)
+#define MAC_WUCSR2 (0x600)
+
#define INT_STS (0x780)
#define INT_BIT_DMA_RX_(channel) BIT(24 + (channel))
#define INT_BIT_ALL_RX_ (0x0F000000)
@@ -534,6 +578,9 @@ struct lan743x_adapter {
struct net_device *netdev;
struct mii_bus *mdiobus;
int msg_enable;
+#ifdef CONFIG_PM
+ u32 wolopts;
+#endif
struct pci_dev *pdev;
struct lan743x_csr csr;
struct lan743x_intr intr;
--
2.7.4
next prev parent reply other threads:[~2018-07-23 21:23 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-07-23 20:16 [PATCH v4 net-next 0/8] lan743x: Add features to lan743x driver Bryan Whitehead
2018-07-23 20:16 ` [PATCH v4 net-next 1/8] lan743x: Add support for ethtool get_drvinfo Bryan Whitehead
2018-07-23 20:16 ` [PATCH v4 net-next 2/8] lan743x: Add support for ethtool link settings Bryan Whitehead
2018-07-23 20:16 ` [PATCH v4 net-next 3/8] lan743x: Add support for ethtool statistics Bryan Whitehead
2018-07-23 20:16 ` [PATCH v4 net-next 4/8] lan743x: Add support for ethtool message level Bryan Whitehead
2018-07-23 20:16 ` [PATCH v4 net-next 5/8] lan743x: Add support for ethtool eeprom access Bryan Whitehead
2018-07-23 20:16 ` Bryan Whitehead [this message]
2018-07-23 20:16 ` [PATCH v4 net-next 7/8] lan743x: Add EEE support Bryan Whitehead
2018-07-23 20:16 ` [PATCH v4 net-next 8/8] lan743x: Add RSS support Bryan Whitehead
2018-07-23 21:11 ` [PATCH v4 net-next 0/8] lan743x: Add features to lan743x driver David Miller
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1532376993-20765-7-git-send-email-Bryan.Whitehead@microchip.com \
--to=bryan.whitehead@microchip.com \
--cc=UNGLinuxDriver@microchip.com \
--cc=davem@davemloft.net \
--cc=netdev@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.