From: Jeykumar Sankaran <jsanka-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org>
To: dri-devel-PD4FTy7X32lNgt0PjOBp9y5qC8QIuHrW@public.gmane.org,
freedreno-PD4FTy7X32lNgt0PjOBp9y5qC8QIuHrW@public.gmane.org,
linux-arm-msm-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
Cc: hoegsberg-hpIqsD4AKlfQT0dZR+AlfA@public.gmane.org,
Jeykumar Sankaran
<jsanka-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org>,
seanpaul-F7+t8E8rja9g9hUCZPvPmw@public.gmane.org,
robdclark-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org
Subject: [PATCH v3 07/13] drm/msm/dpu: avoid querying for hw intf before assignment
Date: Tue, 7 Aug 2018 20:12:34 -0700 [thread overview]
Message-ID: <1533697956-29686-8-git-send-email-jsanka@codeaurora.org> (raw)
In-Reply-To: <1533697956-29686-1-git-send-email-jsanka-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org>
hw intf blocks are needed only during encoder enable to program
timing engines(for video panels). encoder->enable is triggered
only after atomic_modeset at which point we assign the
resources for the display pipeline. This patch defers the
hw_intf look-up until encoder enable.
changes in v2:
- none
changes in v3:
- none
Change-Id: Ib0a2253431468151355e50cbad7b91e2b77b6e54
Signed-off-by: Jeykumar Sankaran <jsanka@codeaurora.org>
---
.../gpu/drm/msm/disp/dpu1/dpu_encoder_phys_vid.c | 53 +++++++---------------
1 file changed, 16 insertions(+), 37 deletions(-)
diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys_vid.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys_vid.c
index c0221cc..a0b3744 100644
--- a/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys_vid.c
+++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys_vid.c
@@ -462,7 +462,7 @@ static void dpu_encoder_phys_vid_enable(struct dpu_encoder_phys *phys_enc)
{
struct msm_drm_private *priv;
struct dpu_encoder_phys_vid *vid_enc;
- struct dpu_hw_intf *intf;
+ struct dpu_rm_hw_iter iter;
struct dpu_hw_ctl *ctl;
u32 flush_mask = 0;
@@ -474,11 +474,20 @@ static void dpu_encoder_phys_vid_enable(struct dpu_encoder_phys *phys_enc)
priv = phys_enc->parent->dev->dev_private;
vid_enc = to_dpu_encoder_phys_vid(phys_enc);
- intf = vid_enc->hw_intf;
ctl = phys_enc->hw_ctl;
- if (!vid_enc->hw_intf || !phys_enc->hw_ctl) {
- DPU_ERROR("invalid hw_intf %d hw_ctl %d\n",
- vid_enc->hw_intf != 0, phys_enc->hw_ctl != 0);
+
+ dpu_rm_init_hw_iter(&iter, phys_enc->parent->base.id, DPU_HW_BLK_INTF);
+ while (dpu_rm_get_hw(&phys_enc->dpu_kms->rm, &iter)) {
+ struct dpu_hw_intf *hw_intf = (struct dpu_hw_intf *)iter.hw;
+
+ if (hw_intf->idx == phys_enc->intf_idx) {
+ vid_enc->hw_intf = hw_intf;
+ break;
+ }
+ }
+
+ if (!vid_enc->hw_intf) {
+ DPU_ERROR("hw_intf not assigned\n");
return;
}
@@ -500,7 +509,7 @@ static void dpu_encoder_phys_vid_enable(struct dpu_encoder_phys *phys_enc)
!dpu_encoder_phys_vid_is_master(phys_enc))
goto skip_flush;
- ctl->ops.get_bitmask_intf(ctl, &flush_mask, intf->idx);
+ ctl->ops.get_bitmask_intf(ctl, &flush_mask, vid_enc->hw_intf->idx);
ctl->ops.update_pending_flush(ctl, flush_mask);
skip_flush:
@@ -531,22 +540,13 @@ static void dpu_encoder_phys_vid_get_hw_resources(
struct dpu_encoder_hw_resources *hw_res,
struct drm_connector_state *conn_state)
{
- struct dpu_encoder_phys_vid *vid_enc;
-
if (!phys_enc || !hw_res) {
DPU_ERROR("invalid arg(s), enc %d hw_res %d conn_state %d\n",
phys_enc != 0, hw_res != 0, conn_state != 0);
return;
}
- vid_enc = to_dpu_encoder_phys_vid(phys_enc);
- if (!vid_enc->hw_intf) {
- DPU_ERROR("invalid arg(s), hw_intf\n");
- return;
- }
-
- DPU_DEBUG_VIDENC(vid_enc, "\n");
- hw_res->intfs[vid_enc->hw_intf->idx - INTF_0] = INTF_MODE_VIDEO;
+ hw_res->intfs[phys_enc->intf_idx - INTF_0] = INTF_MODE_VIDEO;
}
static int _dpu_encoder_phys_vid_wait_for_vblank(
@@ -809,7 +809,6 @@ struct dpu_encoder_phys *dpu_encoder_phys_vid_init(
{
struct dpu_encoder_phys *phys_enc = NULL;
struct dpu_encoder_phys_vid *vid_enc = NULL;
- struct dpu_rm_hw_iter iter;
struct dpu_encoder_irq *irq;
int i, ret = 0;
@@ -829,26 +828,6 @@ struct dpu_encoder_phys *dpu_encoder_phys_vid_init(
phys_enc->hw_mdptop = p->dpu_kms->hw_mdp;
phys_enc->intf_idx = p->intf_idx;
- /**
- * hw_intf resource permanently assigned to this encoder
- * Other resources allocated at atomic commit time by use case
- */
- dpu_rm_init_hw_iter(&iter, 0, DPU_HW_BLK_INTF);
- while (dpu_rm_get_hw(&p->dpu_kms->rm, &iter)) {
- struct dpu_hw_intf *hw_intf = (struct dpu_hw_intf *)iter.hw;
-
- if (hw_intf->idx == p->intf_idx) {
- vid_enc->hw_intf = hw_intf;
- break;
- }
- }
-
- if (!vid_enc->hw_intf) {
- ret = -EINVAL;
- DPU_ERROR("failed to get hw_intf\n");
- goto fail;
- }
-
DPU_DEBUG_VIDENC(vid_enc, "\n");
dpu_encoder_phys_vid_init_ops(&phys_enc->ops);
--
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project
_______________________________________________
Freedreno mailing list
Freedreno@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/freedreno
next prev parent reply other threads:[~2018-08-08 3:12 UTC|newest]
Thread overview: 20+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-08-08 3:12 [PATCH v3 00/13] Atomic resource management Jeykumar Sankaran
[not found] ` <1533697956-29686-1-git-send-email-jsanka-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org>
2018-08-08 3:12 ` [PATCH v3 01/13] drm/msm/dpu: remove scalar config definitions Jeykumar Sankaran
[not found] ` <1533697956-29686-2-git-send-email-jsanka-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org>
2018-08-13 13:50 ` Sean Paul
2018-08-08 3:12 ` [PATCH v3 02/13] drm/msm/dpu: remove resource pool manager Jeykumar Sankaran
[not found] ` <1533697956-29686-3-git-send-email-jsanka-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org>
2018-08-14 19:02 ` Sean Paul
2018-08-08 3:12 ` [PATCH v3 03/13] drm/msm/dpu: remove ping pong split topology variables Jeykumar Sankaran
[not found] ` <1533697956-29686-4-git-send-email-jsanka-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org>
2018-08-14 19:03 ` Sean Paul
2018-08-08 3:12 ` [PATCH v3 04/13] drm/msm/dpu: program master-slave encoders explicitly Jeykumar Sankaran
[not found] ` <1533697956-29686-5-git-send-email-jsanka-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org>
2018-08-14 19:19 ` Sean Paul
2018-08-15 0:11 ` Jeykumar Sankaran
2018-08-08 3:12 ` [PATCH v3 05/13] drm/msm/dpu: use kms stored hw mdp block Jeykumar Sankaran
[not found] ` <1533697956-29686-6-git-send-email-jsanka-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org>
2018-08-14 19:19 ` Sean Paul
2018-08-08 3:12 ` [PATCH v3 06/13] drm/msm/dpu: iterate for assigned hw ctl in virtual encoder Jeykumar Sankaran
[not found] ` <1533697956-29686-7-git-send-email-jsanka-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org>
2018-08-14 19:24 ` Sean Paul
2018-08-08 3:12 ` Jeykumar Sankaran [this message]
[not found] ` <1533697956-29686-8-git-send-email-jsanka-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org>
2018-08-14 19:37 ` [PATCH v3 07/13] drm/msm/dpu: avoid querying for hw intf before assignment Sean Paul
2018-08-08 3:12 ` [PATCH v3 08/13] drm/msm/dpu: move hw resource tracking to crtc state Jeykumar Sankaran
[not found] ` <1533697956-29686-9-git-send-email-jsanka-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org>
2018-08-14 19:57 ` Sean Paul
2018-08-08 3:12 ` [PATCH v3 09/13] drm/msm/dpu: rename hw_ctl to lm_ctl Jeykumar Sankaran
[not found] ` <1533697956-29686-10-git-send-email-jsanka-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org>
2018-08-14 19:59 ` Sean Paul
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1533697956-29686-8-git-send-email-jsanka@codeaurora.org \
--to=jsanka-sgv2jx0feol9jmxxk+q4oq@public.gmane.org \
--cc=dri-devel-PD4FTy7X32lNgt0PjOBp9y5qC8QIuHrW@public.gmane.org \
--cc=freedreno-PD4FTy7X32lNgt0PjOBp9y5qC8QIuHrW@public.gmane.org \
--cc=hoegsberg-hpIqsD4AKlfQT0dZR+AlfA@public.gmane.org \
--cc=linux-arm-msm-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=robdclark-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org \
--cc=seanpaul-F7+t8E8rja9g9hUCZPvPmw@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.