Re: [PATCH] PCI: Equalize hotplug memory for non/occupied slots

["Derrick, Jonathan" <jonathan.derrick@intel.com>]

[-- Attachment #1: Type: text/plain, Size: 3339 bytes --]

It's been a few weeks. Thoughts on this one?

On Wed, 2018-07-25 at 17:02 -0600, Jon Derrick wrote:
> Currently, a hotplug bridge will be given hpmemsize additional memory
> if
> available, in order to satisfy any future hotplug allocation
> requirements.
> 
> These calculations don't consider the current memory size of the
> hotplug
> bridge/slot, so hotplug bridges/slots which have downstream devices
> will
> get their current allocation in addition to the hpmemsize value.
> 
> This makes for possibly undesirable results with a mix of unoccupied
> and
> occupied slots (ex, with hpmemsize=2M):
> 
> 02:03.0 PCI bridge: <-- Occupied
> 	Memory behind bridge: d6200000-d64fffff [size=3M]
> 02:04.0 PCI bridge: <-- Unoccupied
> 	Memory behind bridge: d6500000-d66fffff [size=2M]
> 
> This change considers the current allocation size when using the
> hpmemsize parameter to make the reservations predictable for the mix
> of
> unoccupied and occupied slots:
> 
> 02:03.0 PCI bridge: <-- Occupied
> 	Memory behind bridge: d6200000-d63fffff [size=2M]
> 02:04.0 PCI bridge: <-- Unoccupied
> 	Memory behind bridge: d6400000-d65fffff [size=2M]
> 
> Signed-off-by: Jon Derrick <jonathan.derrick@intel.com>
> ---
> Original RFC here:
> https://patchwork.ozlabs.org/patch/945374/
> 
> I split this bit out from the RFC while awaiting the pci string
> handling
> enhancements to handle per-device settings
> 
> Changed from RFC is a simpler algo
> 
>  drivers/pci/setup-bus.c | 13 ++++++-------
>  1 file changed, 6 insertions(+), 7 deletions(-)
> 
> diff --git a/drivers/pci/setup-bus.c b/drivers/pci/setup-bus.c
> index 79b1824..5ae39e6 100644
> --- a/drivers/pci/setup-bus.c
> +++ b/drivers/pci/setup-bus.c
> @@ -831,7 +831,8 @@ static resource_size_t
> calculate_iosize(resource_size_t size,
>  
>  static resource_size_t calculate_memsize(resource_size_t size,
>  		resource_size_t min_size,
> -		resource_size_t size1,
> +		resource_size_t add_size,
> +		resource_size_t children_add_size,
>  		resource_size_t old_size,
>  		resource_size_t align)
>  {
> @@ -841,7 +842,7 @@ static resource_size_t
> calculate_memsize(resource_size_t size,
>  		old_size = 0;
>  	if (size < old_size)
>  		size = old_size;
> -	size = ALIGN(size + size1, align);
> +	size = ALIGN(max(size, add_size) + children_add_size,
> align);
>  	return size;
>  }
>  
> @@ -1079,12 +1080,10 @@ static int pbus_size_mem(struct pci_bus *bus,
> unsigned long mask,
>  
>  	min_align = calculate_mem_align(aligns, max_order);
>  	min_align = max(min_align, window_alignment(bus, b_res-
> >flags));
> -	size0 = calculate_memsize(size, min_size, 0,
> resource_size(b_res), min_align);
> +	size0 = calculate_memsize(size, min_size, 0, 0,
> resource_size(b_res), min_align);
>  	add_align = max(min_align, add_align);
> -	if (children_add_size > add_size)
> -		add_size = children_add_size;
> -	size1 = (!realloc_head || (realloc_head && !add_size)) ?
> size0 :
> -		calculate_memsize(size, min_size, add_size,
> +	size1 = (!realloc_head || (realloc_head && !add_size &&
> !children_add_size)) ? size0 :
> +		calculate_memsize(size, min_size, add_size,
> children_add_size,
>  				resource_size(b_res), add_align);
>  	if (!size0 && !size1) {
>  		if (b_res->start || b_res->end)

[-- Attachment #2: smime.p7s --]
[-- Type: application/x-pkcs7-signature, Size: 3278 bytes --]