From: Luca Boccassi <bluca@debian.org>
To: Marco Varlese <mvarlese@suse.de>, dpdk stable <stable@dpdk.org>
Cc: dev@dpdk.org
Subject: Re: [dpdk-stable] 16.11.8 (LTS) patches review and test
Date: Mon, 20 Aug 2018 09:46:14 +0100 [thread overview]
Message-ID: <1534754774.5764.76.camel@debian.org> (raw)
In-Reply-To: <32a48b23334b89d9b53de0e2db242b620d9a7f90.camel@suse.de>
Great, thanks for checking!
On Mon, 2018-08-20 at 08:46 +0200, Marco Varlese wrote:
> Hi Luca & all,
>
> I have gone through the usual smoke tests using test_pmd and OvS-
> DPDK.
> I have not experienced any issues with the -rc1 release.
>
>
> Thanks,
> Marco
>
> On Mon, 2018-08-13 at 19:21 +0100, luca.boccassi@gmail.com wrote:
> > Hi all,
> >
> > Here is a list of patches targeted for LTS release 16.11.8. Please
> > help review and test. The planned date for the final release is
> > August
> > the 23rd.
> > Before that, please shout if anyone has objections with these
> > patches being applied.
> >
> > Also for the companies committed to running regression tests,
> > please run the tests and report any issue before the release date.
> >
> > A release candidate tarball can be found at:
> >
> > https://dpdk.org/browse/dpdk-stable/tag/?id=v16.11.8-rc1
> >
> > These patches are located at branch 16.11 of dpdk-stable repo:
> > https://dpdk.org/browse/dpdk-stable/
> >
> > Thanks.
> >
> > Luca Boccassi
> >
> > ---
> > Adrien Mazarguil (1):
> > maintainers: update for Mellanox PMDs
> >
> > Ajit Khaparde (6):
> > net/bnxt: fix HW Tx checksum offload check
> > net/bnxt: fix incorrect IO address handling in Tx
> > net/bnxt: fix Rx ring count limitation
> > net/bnxt: check access denied for HWRM commands
> > net/bnxt: fix RETA size
> > net/bnxt: fix close operation
> >
> > Alejandro Lucero (1):
> > net/nfp: fix field initialization in Tx descriptor
> >
> > Anatoly Burakov (2):
> > eal/linux: fix invalid syntax in interrupts
> > test: fix EAL flags autotest on FreeBSD
> >
> > Beilei Xing (1):
> > net/i40e: fix shifts of 32-bit value
> >
> > Bruce Richardson (2):
> > examples/exception_path: fix out-of-bounds read
> > mk: fix permissions when using make install
> >
> > Chas Williams (1):
> > net/bonding: do not clear active slave count
> >
> > Damjan Marion (1):
> > net/i40e: do not reset device info data
> >
> > Dan Gora (1):
> > kni: fix crash with null name
> >
> > Daria Kolistratova (1):
> > net/ena: fix SIGFPE with 0 Rx queue
> >
> > Dariusz Stojaczyk (1):
> > eal: fix return codes on thread naming failure
> >
> > Drocula Lambda (1):
> > kni: fix build on RHEL 7.5
> >
> > Emma Kenny (1):
> > examples/multi_process: build l2fwd_fork app
> >
> > Ferruh Yigit (2):
> > kni: fix build with gcc 8.1
> > net/thunderx: fix build with gcc optimization on
> >
> > Fiona Trahe (1):
> > crypto/qat: fix checks for 3GPP algo bit params
> >
> > Gage Eads (1):
> > net: rename u16 to fix shadowed declaration
> >
> > Gavin Hu (1):
> > maintainers: claim maintainership for ARM v7 and v8
> >
> > Haiyue Wang (2):
> > mbuf: fix typo in IPv6 macro comment
> > net/i40e: workaround performance degradation
> >
> > Hemant Agrawal (1):
> > test/crypto: fix device id when stopping port
> >
> > Hyong Youb Kim (1):
> > net/enic: do not overwrite admin Tx queue limit
> >
> > Ido Goshen (1):
> > net/pcap: fix multiple queues
> >
> > Jerin Jacob (2):
> > ethdev: fix queue statistics mapping documentation
> > eal: fix bitmap documentation
> >
> > Kiran Kumar (3):
> > net/bonding: fix MAC address reset
> > ethdev: check queue stats mapping input arguments
> > net/thunderx: avoid sq door bell write on zero packet
> >
> > Konstantin Ananyev (3):
> > examples/ipsec-secgw: fix IPv4 checksum at Tx
> > examples/ipsec-secgw: fix bypass rule processing
> > app/testpmd: fix DCB config
> >
> > Maxime Coquelin (1):
> > vhost: fix missing increment of log cache count
> >
> > Pablo de Lara (3):
> > test/hash: fix multiwriter with non consecutive cores
> > test/hash: fix potential memory leak
> > hash: fix doxygen of return values
> >
> > Radu Nicolau (2):
> > test: fix uninitialized port configuration
> > net/bonding: fix race condition
> >
> > Rafal Kozik (4):
> > net/ena: check pointer before memset
> > net/ena: change memory type
> > net/ena: fix GENMASK_ULL macro
> > net/ena: set link speed as none
> >
> > Rahul Lakkireddy (2):
> > net/cxgbe/base: update flash part information
> > net/cxgbe: fix init failure due to new flash parts
> >
> > Rami Rosen (2):
> > examples/l3fwd: remove useless include
> > ethdev: fix a doxygen comment for port allocation
> >
> > Rasesh Mody (3):
> > net/qede: fix default extended VLAN offload config
> > net/qede/base: fix GRC attention callback
> > net/bnx2x: fix FW command timeout during stop
> >
> > Shahed Shaikh (1):
> > net/qede: fix MAC address removal failure message
> >
> > Shreyansh Jain (1):
> > doc: fix bonding command in testpmd
> >
> > Wei Zhao (6):
> > net/ixgbe: fix tunnel id format error for FDIR
> > net/ixgbe: fix tunnel type set error for FDIR
> > net/ixgbe: fix mask bits register set error for FDIR
> > app/testpmd: fix VLAN TCI mask set error for FDIR
> > net/i40e: fix check of flow director programming status
> > net/i40e: revert fix of flow director check
> >
> > Xiaoxin Peng (1):
> > net/bnxt: fix Tx with multiple mbuf
> >
> > Xiaoyun Li (1):
> > net/i40e: fix link speed
> >
> > Yipeng Wang (3):
> > hash: fix multiwriter lock memory allocation
> > hash: fix a multi-writer race condition
> > hash: fix key slot size accuracy
--
Kind regards,
Luca Boccassi
next prev parent reply other threads:[~2018-08-20 8:46 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-08-13 18:21 16.11.8 (LTS) patches review and test luca.boccassi
2018-08-20 6:46 ` [dpdk-stable] " Marco Varlese
2018-08-20 8:46 ` Luca Boccassi [this message]
2018-08-20 8:46 ` Luca Boccassi
2018-08-23 8:55 ` Luca Boccassi
2018-08-27 16:17 ` Luca Boccassi
2018-08-29 9:55 ` Luca Boccassi
2018-08-29 10:58 ` Marco Varlese
2018-08-29 13:28 ` Marco Varlese
2018-08-29 13:36 ` [dpdk-stable] " Luca Boccassi
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1534754774.5764.76.camel@debian.org \
--to=bluca@debian.org \
--cc=dev@dpdk.org \
--cc=mvarlese@suse.de \
--cc=stable@dpdk.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.