From: <gregkh@linuxfoundation.org>
To: oneukum@suse.com, gregkh@linuxfoundation.org, stable@vger.kernel.org
Subject: patch "USB: usbdevfs: sanitize flags more" added to usb-linus
Date: Thu, 20 Sep 2018 12:48:55 +0200 [thread overview]
Message-ID: <15374405358192@kroah.com> (raw)
This is a note to let you know that I've just added the patch titled
USB: usbdevfs: sanitize flags more
to my usb git tree which can be found at
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb.git
in the usb-linus branch.
The patch will show up in the next release of the linux-next tree
(usually sometime within the next 24 hours during the week.)
The patch will hopefully also be merged in Linus's tree for the
next -rc kernel release.
If you have any questions about this process, please let me know.
>From 7a68d9fb851012829c29e770621905529bd9490b Mon Sep 17 00:00:00 2001
From: Oliver Neukum <oneukum@suse.com>
Date: Wed, 5 Sep 2018 12:07:02 +0200
Subject: USB: usbdevfs: sanitize flags more
Requesting a ZERO_PACKET or not is sensible only for output.
In the input direction the device decides.
Likewise accepting short packets makes sense only for input.
This allows operation with panic_on_warn without opening up
a local DOS.
Signed-off-by: Oliver Neukum <oneukum@suse.com>
Reported-by: syzbot+843efa30c8821bd69f53@syzkaller.appspotmail.com
Fixes: 0cb54a3e47cb ("USB: debugging code shouldn't alter control flow")
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/usb/core/devio.c | 19 ++++++++++++++++---
1 file changed, 16 insertions(+), 3 deletions(-)
diff --git a/drivers/usb/core/devio.c b/drivers/usb/core/devio.c
index 6ce77b33da61..263dd2f309fb 100644
--- a/drivers/usb/core/devio.c
+++ b/drivers/usb/core/devio.c
@@ -1434,10 +1434,13 @@ static int proc_do_submiturb(struct usb_dev_state *ps, struct usbdevfs_urb *uurb
struct async *as = NULL;
struct usb_ctrlrequest *dr = NULL;
unsigned int u, totlen, isofrmlen;
- int i, ret, is_in, num_sgs = 0, ifnum = -1;
+ int i, ret, num_sgs = 0, ifnum = -1;
int number_of_packets = 0;
unsigned int stream_id = 0;
void *buf;
+ bool is_in;
+ bool allow_short = false;
+ bool allow_zero = false;
unsigned long mask = USBDEVFS_URB_SHORT_NOT_OK |
USBDEVFS_URB_BULK_CONTINUATION |
USBDEVFS_URB_NO_FSBR |
@@ -1471,6 +1474,8 @@ static int proc_do_submiturb(struct usb_dev_state *ps, struct usbdevfs_urb *uurb
u = 0;
switch (uurb->type) {
case USBDEVFS_URB_TYPE_CONTROL:
+ if (is_in)
+ allow_short = true;
if (!usb_endpoint_xfer_control(&ep->desc))
return -EINVAL;
/* min 8 byte setup packet */
@@ -1511,6 +1516,10 @@ static int proc_do_submiturb(struct usb_dev_state *ps, struct usbdevfs_urb *uurb
break;
case USBDEVFS_URB_TYPE_BULK:
+ if (!is_in)
+ allow_zero = true;
+ else
+ allow_short = true;
switch (usb_endpoint_type(&ep->desc)) {
case USB_ENDPOINT_XFER_CONTROL:
case USB_ENDPOINT_XFER_ISOC:
@@ -1531,6 +1540,10 @@ static int proc_do_submiturb(struct usb_dev_state *ps, struct usbdevfs_urb *uurb
if (!usb_endpoint_xfer_int(&ep->desc))
return -EINVAL;
interrupt_urb:
+ if (!is_in)
+ allow_zero = true;
+ else
+ allow_short = true;
break;
case USBDEVFS_URB_TYPE_ISO:
@@ -1676,9 +1689,9 @@ static int proc_do_submiturb(struct usb_dev_state *ps, struct usbdevfs_urb *uurb
u = (is_in ? URB_DIR_IN : URB_DIR_OUT);
if (uurb->flags & USBDEVFS_URB_ISO_ASAP)
u |= URB_ISO_ASAP;
- if (uurb->flags & USBDEVFS_URB_SHORT_NOT_OK && is_in)
+ if (allow_short && uurb->flags & USBDEVFS_URB_SHORT_NOT_OK)
u |= URB_SHORT_NOT_OK;
- if (uurb->flags & USBDEVFS_URB_ZERO_PACKET)
+ if (allow_zero && uurb->flags & USBDEVFS_URB_ZERO_PACKET)
u |= URB_ZERO_PACKET;
if (uurb->flags & USBDEVFS_URB_NO_INTERRUPT)
u |= URB_NO_INTERRUPT;
--
2.19.0
reply other threads:[~2018-09-20 16:31 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=15374405358192@kroah.com \
--to=gregkh@linuxfoundation.org \
--cc=oneukum@suse.com \
--cc=stable@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.