patch "USB: serial: option: add two-endpoints device-id flag" added to usb-linus

[<gregkh@linuxfoundation.org>]

This is a note to let you know that I've just added the patch titled

    USB: serial: option: add two-endpoints device-id flag

to my usb git tree which can be found at
    git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb.git
in the usb-linus branch.

The patch will show up in the next release of the linux-next tree
(usually sometime within the next 24 hours during the week.)

The patch will hopefully also be merged in Linus's tree for the
next -rc kernel release.

If you have any questions about this process, please let me know.


>From 35aecc02b5b621782111f64cbb032c7f6a90bb32 Mon Sep 17 00:00:00 2001
From: Johan Hovold <johan@kernel.org>
Date: Thu, 13 Sep 2018 11:21:50 +0200
Subject: USB: serial: option: add two-endpoints device-id flag

Allow matching on interfaces having two endpoints by adding a new
device-id flag.

This allows for the handling of devices whose interface numbers can
change (e.g. Quectel EP06) to be contained in the device-id table.

Tested-by: Kristian Evensen <kristian.evensen@gmail.com>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Johan Hovold <johan@kernel.org>
---
 drivers/usb/serial/option.c | 17 +++++++----------
 1 file changed, 7 insertions(+), 10 deletions(-)

diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c
index 382feafbd127..e72ad9f81c73 100644
--- a/drivers/usb/serial/option.c
+++ b/drivers/usb/serial/option.c
@@ -561,6 +561,9 @@ static void option_instat_callback(struct urb *urb);
 /* Interface is reserved */
 #define RSVD(ifnum)	((BIT(ifnum) & 0xff) << 0)
 
+/* Interface must have two endpoints */
+#define NUMEP2		BIT(16)
+
 
 static const struct usb_device_id option_ids[] = {
 	{ USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_COLT) },
@@ -1082,7 +1085,7 @@ static const struct usb_device_id option_ids[] = {
 	{ USB_DEVICE(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_BG96),
 	  .driver_info = RSVD(4) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EP06, 0xff, 0xff, 0xff),
-	  .driver_info = RSVD(1) | RSVD(2) | RSVD(3) | RSVD(4) },
+	  .driver_info = RSVD(1) | RSVD(2) | RSVD(3) | RSVD(4) | NUMEP2 },
 	{ USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EP06, 0xff, 0, 0) },
 	{ USB_DEVICE(CMOTECH_VENDOR_ID, CMOTECH_PRODUCT_6001) },
 	{ USB_DEVICE(CMOTECH_VENDOR_ID, CMOTECH_PRODUCT_CMU_300) },
@@ -1986,7 +1989,6 @@ static int option_probe(struct usb_serial *serial,
 {
 	struct usb_interface_descriptor *iface_desc =
 				&serial->interface->cur_altsetting->desc;
-	struct usb_device_descriptor *dev_desc = &serial->dev->descriptor;
 	unsigned long device_flags = id->driver_info;
 
 	/* Never bind to the CD-Rom emulation interface	*/
@@ -2002,16 +2004,11 @@ static int option_probe(struct usb_serial *serial,
 		return -ENODEV;
 
 	/*
-	 * Don't bind to the QMI device of the Quectel EP06/EG06/EM06. Class,
-	 * subclass and protocol is 0xff for both the diagnostic port and the
-	 * QMI interface, but the diagnostic port only has two endpoints (QMI
-	 * has three).
+	 * Allow matching on bNumEndpoints for devices whose interface numbers
+	 * can change (e.g. Quectel EP06).
 	 */
-	if (dev_desc->idVendor == cpu_to_le16(QUECTEL_VENDOR_ID) &&
-	    dev_desc->idProduct == cpu_to_le16(QUECTEL_PRODUCT_EP06) &&
-	    iface_desc->bInterfaceSubClass && iface_desc->bNumEndpoints == 3) {
+	if (device_flags & NUMEP2 && iface_desc->bNumEndpoints != 2)
 		return -ENODEV;
-	}
 
 	/* Store the device flags so we can use them during attach. */
 	usb_set_serial_data(serial, (void *)device_flags);
-- 
2.19.0