From: sunil.kovvuri@gmail.com
To: netdev@vger.kernel.org, davem@davemloft.net
Cc: arnd@arndb.de, linux-soc@vger.kernel.org,
Sunil Goutham <sgoutham@marvell.com>
Subject: [PATCH v2 13/17] octeontx2-af: Install ucast and bcast pkt forwarding rules
Date: Mon, 22 Oct 2018 23:26:00 +0530 [thread overview]
Message-ID: <1540230964-5506-14-git-send-email-sunil.kovvuri@gmail.com> (raw)
In-Reply-To: <1540230964-5506-1-git-send-email-sunil.kovvuri@gmail.com>
From: Sunil Goutham <sgoutham@marvell.com>
Upon NIXLF_ALLOC install a unicast forwarding rule in NPC MCAM
like below
- Match pkt DMAC with NIXLF attached PF/VF's MAC address.
- Ingress channel
- Action is UCAST
- Forward to PF_FUNC of this NIXLF
And broadcast pkt forwarding rule as
- Match L2B bit in MCAM search key
- Ingress channel
- Action is UCAST, for now, later it will be changed to MCAST.
Only PFs can install this rule
Upon NIXLF_FREE disable all MCAM entries in use by that NIXLF.
Signed-off-by: Sunil Goutham <sgoutham@marvell.com>
---
drivers/net/ethernet/marvell/octeontx2/af/npc.h | 19 ++
drivers/net/ethernet/marvell/octeontx2/af/rvu.h | 5 +
.../net/ethernet/marvell/octeontx2/af/rvu_nix.c | 14 +
.../net/ethernet/marvell/octeontx2/af/rvu_npc.c | 337 +++++++++++++++++++++
4 files changed, 375 insertions(+)
diff --git a/drivers/net/ethernet/marvell/octeontx2/af/npc.h b/drivers/net/ethernet/marvell/octeontx2/af/npc.h
index 58d8f0b..f98b011 100644
--- a/drivers/net/ethernet/marvell/octeontx2/af/npc.h
+++ b/drivers/net/ethernet/marvell/octeontx2/af/npc.h
@@ -240,4 +240,23 @@ struct npc_kpu_pkind_cpi_def {
u64 ena : 1;
#endif
};
+
+struct nix_rx_action {
+#if defined(__BIG_ENDIAN_BITFIELD)
+ u64 rsvd_63_61 :3;
+ u64 flow_key_alg :5;
+ u64 match_id :16;
+ u64 index :20;
+ u64 pf_func :16;
+ u64 op :4;
+#else
+ u64 op :4;
+ u64 pf_func :16;
+ u64 index :20;
+ u64 match_id :16;
+ u64 flow_key_alg :5;
+ u64 rsvd_63_61 :3;
+#endif
+};
+
#endif /* NPC_H */
diff --git a/drivers/net/ethernet/marvell/octeontx2/af/rvu.h b/drivers/net/ethernet/marvell/octeontx2/af/rvu.h
index 12391d2..e83d324 100644
--- a/drivers/net/ethernet/marvell/octeontx2/af/rvu.h
+++ b/drivers/net/ethernet/marvell/octeontx2/af/rvu.h
@@ -347,4 +347,9 @@ int rvu_npc_init(struct rvu *rvu);
void rvu_npc_freemem(struct rvu *rvu);
int rvu_npc_get_pkind(struct rvu *rvu, u16 pf);
void rvu_npc_set_pkind(struct rvu *rvu, int pkind, struct rvu_pfvf *pfvf);
+void rvu_npc_install_ucast_entry(struct rvu *rvu, u16 pcifunc,
+ int nixlf, u64 chan, u8 *mac_addr);
+void rvu_npc_install_bcast_match_entry(struct rvu *rvu, u16 pcifunc,
+ int nixlf, u64 chan);
+void rvu_npc_disable_mcam_entries(struct rvu *rvu, u16 pcifunc, int nixlf);
#endif /* RVU_H */
diff --git a/drivers/net/ethernet/marvell/octeontx2/af/rvu_nix.c b/drivers/net/ethernet/marvell/octeontx2/af/rvu_nix.c
index 86b1e9b..fbe4ff0 100644
--- a/drivers/net/ethernet/marvell/octeontx2/af/rvu_nix.c
+++ b/drivers/net/ethernet/marvell/octeontx2/af/rvu_nix.c
@@ -151,13 +151,24 @@ static int nix_interface_init(struct rvu *rvu, u16 pcifunc, int type, int nixlf)
break;
}
+ /* Add a UCAST forwarding rule in MCAM with this NIXLF attached
+ * RVU PF/VF's MAC address.
+ */
+ rvu_npc_install_ucast_entry(rvu, pcifunc, nixlf,
+ pfvf->rx_chan_base, pfvf->mac_addr);
+
/* Add this PF_FUNC to bcast pkt replication list */
err = nix_update_bcast_mce_list(rvu, pcifunc, true);
if (err) {
dev_err(rvu->dev,
"Bcast list, failed to enable PF_FUNC 0x%x\n",
pcifunc);
+ return err;
}
+
+ rvu_npc_install_bcast_match_entry(rvu, pcifunc,
+ nixlf, pfvf->rx_chan_base);
+
return 0;
}
@@ -172,6 +183,9 @@ static void nix_interface_deinit(struct rvu *rvu, u16 pcifunc, u8 nixlf)
"Bcast list, failed to disable PF_FUNC 0x%x\n",
pcifunc);
}
+
+ /* Free and disable any MCAM entries used by this NIX LF */
+ rvu_npc_disable_mcam_entries(rvu, pcifunc, nixlf);
}
static void nix_setup_lso_tso_l3(struct rvu *rvu, int blkaddr,
diff --git a/drivers/net/ethernet/marvell/octeontx2/af/rvu_npc.c b/drivers/net/ethernet/marvell/octeontx2/af/rvu_npc.c
index 1c29436..845ea98 100644
--- a/drivers/net/ethernet/marvell/octeontx2/af/rvu_npc.c
+++ b/drivers/net/ethernet/marvell/octeontx2/af/rvu_npc.c
@@ -26,6 +26,14 @@
#define NPC_PARSE_RESULT_DMAC_OFFSET 8
+struct mcam_entry {
+#define NPC_MAX_KWS_IN_KEY 7 /* Number of keywords in max keywidth */
+ u64 kw[NPC_MAX_KWS_IN_KEY];
+ u64 kw_mask[NPC_MAX_KWS_IN_KEY];
+ u64 action;
+ u64 vtag_action;
+};
+
void rvu_npc_set_pkind(struct rvu *rvu, int pkind, struct rvu_pfvf *pfvf)
{
int blkaddr;
@@ -54,6 +62,335 @@ int rvu_npc_get_pkind(struct rvu *rvu, u16 pf)
return -1;
}
+static int npc_get_nixlf_mcam_index(struct npc_mcam *mcam,
+ u16 pcifunc, int nixlf, int type)
+{
+ int pf = rvu_get_pf(pcifunc);
+ int index;
+
+ /* Check if this is for a PF */
+ if (pf && !(pcifunc & RVU_PFVF_FUNC_MASK)) {
+ /* Reserved entries exclude PF0 */
+ pf--;
+ index = mcam->pf_offset + (pf * RSVD_MCAM_ENTRIES_PER_PF);
+ /* Broadcast address matching entry should be first so
+ * that the packet can be replicated to all VFs.
+ */
+ if (type == NIXLF_BCAST_ENTRY)
+ return index;
+ else if (type == NIXLF_PROMISC_ENTRY)
+ return index + 1;
+ }
+
+ return (mcam->nixlf_offset + (nixlf * RSVD_MCAM_ENTRIES_PER_NIXLF));
+}
+
+static int npc_get_bank(struct npc_mcam *mcam, int index)
+{
+ int bank = index / mcam->banksize;
+
+ /* 0,1 & 2,3 banks are combined for this keysize */
+ if (mcam->keysize == NPC_MCAM_KEY_X2)
+ return bank ? 2 : 0;
+
+ return bank;
+}
+
+static bool is_mcam_entry_enabled(struct rvu *rvu, struct npc_mcam *mcam,
+ int blkaddr, int index)
+{
+ int bank = npc_get_bank(mcam, index);
+ u64 cfg;
+
+ index &= (mcam->banksize - 1);
+ cfg = rvu_read64(rvu, blkaddr, NPC_AF_MCAMEX_BANKX_CFG(index, bank));
+ return (cfg & 1);
+}
+
+static void npc_enable_mcam_entry(struct rvu *rvu, struct npc_mcam *mcam,
+ int blkaddr, int index, bool enable)
+{
+ int bank = npc_get_bank(mcam, index);
+ int actbank = bank;
+
+ index &= (mcam->banksize - 1);
+ for (; bank < (actbank + mcam->banks_per_entry); bank++) {
+ rvu_write64(rvu, blkaddr,
+ NPC_AF_MCAMEX_BANKX_CFG(index, bank),
+ enable ? 1 : 0);
+ }
+}
+
+static void npc_get_keyword(struct mcam_entry *entry, int idx,
+ u64 *cam0, u64 *cam1)
+{
+ u64 kw_mask = 0x00;
+
+#define CAM_MASK(n) (BIT_ULL(n) - 1)
+
+ /* 0, 2, 4, 6 indices refer to BANKX_CAMX_W0 and
+ * 1, 3, 5, 7 indices refer to BANKX_CAMX_W1.
+ *
+ * Also, only 48 bits of BANKX_CAMX_W1 are valid.
+ */
+ switch (idx) {
+ case 0:
+ /* BANK(X)_CAM_W0<63:0> = MCAM_KEY[KW0]<63:0> */
+ *cam1 = entry->kw[0];
+ kw_mask = entry->kw_mask[0];
+ break;
+ case 1:
+ /* BANK(X)_CAM_W1<47:0> = MCAM_KEY[KW1]<47:0> */
+ *cam1 = entry->kw[1] & CAM_MASK(48);
+ kw_mask = entry->kw_mask[1] & CAM_MASK(48);
+ break;
+ case 2:
+ /* BANK(X + 1)_CAM_W0<15:0> = MCAM_KEY[KW1]<63:48>
+ * BANK(X + 1)_CAM_W0<63:16> = MCAM_KEY[KW2]<47:0>
+ */
+ *cam1 = (entry->kw[1] >> 48) & CAM_MASK(16);
+ *cam1 |= ((entry->kw[2] & CAM_MASK(48)) << 16);
+ kw_mask = (entry->kw_mask[1] >> 48) & CAM_MASK(16);
+ kw_mask |= ((entry->kw_mask[2] & CAM_MASK(48)) << 16);
+ break;
+ case 3:
+ /* BANK(X + 1)_CAM_W1<15:0> = MCAM_KEY[KW2]<63:48>
+ * BANK(X + 1)_CAM_W1<47:16> = MCAM_KEY[KW3]<31:0>
+ */
+ *cam1 = (entry->kw[2] >> 48) & CAM_MASK(16);
+ *cam1 |= ((entry->kw[3] & CAM_MASK(32)) << 16);
+ kw_mask = (entry->kw_mask[2] >> 48) & CAM_MASK(16);
+ kw_mask |= ((entry->kw_mask[3] & CAM_MASK(32)) << 16);
+ break;
+ case 4:
+ /* BANK(X + 2)_CAM_W0<31:0> = MCAM_KEY[KW3]<63:32>
+ * BANK(X + 2)_CAM_W0<63:32> = MCAM_KEY[KW4]<31:0>
+ */
+ *cam1 = (entry->kw[3] >> 32) & CAM_MASK(32);
+ *cam1 |= ((entry->kw[4] & CAM_MASK(32)) << 32);
+ kw_mask = (entry->kw_mask[3] >> 32) & CAM_MASK(32);
+ kw_mask |= ((entry->kw_mask[4] & CAM_MASK(32)) << 32);
+ break;
+ case 5:
+ /* BANK(X + 2)_CAM_W1<31:0> = MCAM_KEY[KW4]<63:32>
+ * BANK(X + 2)_CAM_W1<47:32> = MCAM_KEY[KW5]<15:0>
+ */
+ *cam1 = (entry->kw[4] >> 32) & CAM_MASK(32);
+ *cam1 |= ((entry->kw[5] & CAM_MASK(16)) << 32);
+ kw_mask = (entry->kw_mask[4] >> 32) & CAM_MASK(32);
+ kw_mask |= ((entry->kw_mask[5] & CAM_MASK(16)) << 32);
+ break;
+ case 6:
+ /* BANK(X + 3)_CAM_W0<47:0> = MCAM_KEY[KW5]<63:16>
+ * BANK(X + 3)_CAM_W0<63:48> = MCAM_KEY[KW6]<15:0>
+ */
+ *cam1 = (entry->kw[5] >> 16) & CAM_MASK(48);
+ *cam1 |= ((entry->kw[6] & CAM_MASK(16)) << 48);
+ kw_mask = (entry->kw_mask[5] >> 16) & CAM_MASK(48);
+ kw_mask |= ((entry->kw_mask[6] & CAM_MASK(16)) << 48);
+ break;
+ case 7:
+ /* BANK(X + 3)_CAM_W1<47:0> = MCAM_KEY[KW6]<63:16> */
+ *cam1 = (entry->kw[6] >> 16) & CAM_MASK(48);
+ kw_mask = (entry->kw_mask[6] >> 16) & CAM_MASK(48);
+ break;
+ }
+
+ *cam1 &= kw_mask;
+ *cam0 = ~*cam1 & kw_mask;
+}
+
+static void npc_config_mcam_entry(struct rvu *rvu, struct npc_mcam *mcam,
+ int blkaddr, int index, u8 intf,
+ struct mcam_entry *entry, bool enable)
+{
+ int bank = npc_get_bank(mcam, index);
+ int kw = 0, actbank, actindex;
+ u64 cam0, cam1;
+
+ actbank = bank; /* Save bank id, to set action later on */
+ actindex = index;
+ index &= (mcam->banksize - 1);
+
+ /* CAM1 takes the comparison value and
+ * CAM0 specifies match for a bit in key being '0' or '1' or 'dontcare'.
+ * CAM1<n> = 0 & CAM0<n> = 1 => match if key<n> = 0
+ * CAM1<n> = 1 & CAM0<n> = 0 => match if key<n> = 1
+ * CAM1<n> = 0 & CAM0<n> = 0 => always match i.e dontcare.
+ */
+ for (; bank < (actbank + mcam->banks_per_entry); bank++, kw = kw + 2) {
+ /* Interface should be set in all banks */
+ rvu_write64(rvu, blkaddr,
+ NPC_AF_MCAMEX_BANKX_CAMX_INTF(index, bank, 1),
+ intf);
+ rvu_write64(rvu, blkaddr,
+ NPC_AF_MCAMEX_BANKX_CAMX_INTF(index, bank, 0),
+ ~intf & 0x3);
+
+ /* Set the match key */
+ npc_get_keyword(entry, kw, &cam0, &cam1);
+ rvu_write64(rvu, blkaddr,
+ NPC_AF_MCAMEX_BANKX_CAMX_W0(index, bank, 1), cam1);
+ rvu_write64(rvu, blkaddr,
+ NPC_AF_MCAMEX_BANKX_CAMX_W0(index, bank, 0), cam0);
+
+ npc_get_keyword(entry, kw + 1, &cam0, &cam1);
+ rvu_write64(rvu, blkaddr,
+ NPC_AF_MCAMEX_BANKX_CAMX_W1(index, bank, 1), cam1);
+ rvu_write64(rvu, blkaddr,
+ NPC_AF_MCAMEX_BANKX_CAMX_W1(index, bank, 0), cam0);
+ }
+
+ /* Set 'action' */
+ rvu_write64(rvu, blkaddr,
+ NPC_AF_MCAMEX_BANKX_ACTION(index, actbank), entry->action);
+
+ /* Set TAG 'action' */
+ rvu_write64(rvu, blkaddr, NPC_AF_MCAMEX_BANKX_TAG_ACT(index, actbank),
+ entry->vtag_action);
+
+ /* Enable the entry */
+ if (enable)
+ npc_enable_mcam_entry(rvu, mcam, blkaddr, actindex, true);
+ else
+ npc_enable_mcam_entry(rvu, mcam, blkaddr, actindex, false);
+}
+
+static u64 npc_get_mcam_action(struct rvu *rvu, struct npc_mcam *mcam,
+ int blkaddr, int index)
+{
+ int bank = npc_get_bank(mcam, index);
+
+ index &= (mcam->banksize - 1);
+ return rvu_read64(rvu, blkaddr,
+ NPC_AF_MCAMEX_BANKX_ACTION(index, bank));
+}
+
+void rvu_npc_install_ucast_entry(struct rvu *rvu, u16 pcifunc,
+ int nixlf, u64 chan, u8 *mac_addr)
+{
+ struct npc_mcam *mcam = &rvu->hw->mcam;
+ struct mcam_entry entry = { {0} };
+ struct nix_rx_action action;
+ int blkaddr, index, kwi;
+ u64 mac = 0;
+
+ blkaddr = rvu_get_blkaddr(rvu, BLKTYPE_NPC, 0);
+ if (blkaddr < 0)
+ return;
+
+ for (index = ETH_ALEN - 1; index >= 0; index--)
+ mac |= ((u64)*mac_addr++) << (8 * index);
+
+ index = npc_get_nixlf_mcam_index(mcam, pcifunc,
+ nixlf, NIXLF_UCAST_ENTRY);
+
+ /* Match ingress channel and DMAC */
+ entry.kw[0] = chan;
+ entry.kw_mask[0] = 0xFFFULL;
+
+ kwi = NPC_PARSE_RESULT_DMAC_OFFSET / sizeof(u64);
+ entry.kw[kwi] = mac;
+ entry.kw_mask[kwi] = BIT_ULL(48) - 1;
+
+ /* Don't change the action if entry is already enabled
+ * Otherwise RSS action may get overwritten.
+ */
+ if (is_mcam_entry_enabled(rvu, mcam, blkaddr, index)) {
+ *(u64 *)&action = npc_get_mcam_action(rvu, mcam,
+ blkaddr, index);
+ } else {
+ *(u64 *)&action = 0x00;
+ action.op = NIX_RX_ACTIONOP_UCAST;
+ action.pf_func = pcifunc;
+ }
+
+ entry.action = *(u64 *)&action;
+ npc_config_mcam_entry(rvu, mcam, blkaddr, index,
+ NIX_INTF_RX, &entry, true);
+}
+
+void rvu_npc_install_bcast_match_entry(struct rvu *rvu, u16 pcifunc,
+ int nixlf, u64 chan)
+{
+ struct npc_mcam *mcam = &rvu->hw->mcam;
+ struct mcam_entry entry = { {0} };
+ struct nix_rx_action action;
+#ifdef MCAST_MCE
+ struct rvu_pfvf *pfvf;
+#endif
+ int blkaddr, index;
+
+ blkaddr = rvu_get_blkaddr(rvu, BLKTYPE_NPC, 0);
+ if (blkaddr < 0)
+ return;
+
+ /* Only PF can add a bcast match entry */
+ if (pcifunc & RVU_PFVF_FUNC_MASK)
+ return;
+#ifdef MCAST_MCE
+ pfvf = rvu_get_pfvf(rvu, pcifunc & ~RVU_PFVF_FUNC_MASK);
+#endif
+
+ index = npc_get_nixlf_mcam_index(mcam, pcifunc,
+ nixlf, NIXLF_BCAST_ENTRY);
+
+ /* Check for L2B bit and LMAC channel */
+ entry.kw[0] = BIT_ULL(25) | chan;
+ entry.kw_mask[0] = BIT_ULL(25) | 0xFFFULL;
+
+ *(u64 *)&action = 0x00;
+#ifdef MCAST_MCE
+ /* Early silicon doesn't support pkt replication,
+ * so install entry with UCAST action, so that PF
+ * receives all broadcast packets.
+ */
+ action.op = NIX_RX_ACTIONOP_MCAST;
+ action.pf_func = pcifunc;
+ action.index = pfvf->bcast_mce_idx;
+#else
+ action.op = NIX_RX_ACTIONOP_UCAST;
+ action.pf_func = pcifunc;
+#endif
+
+ entry.action = *(u64 *)&action;
+ npc_config_mcam_entry(rvu, mcam, blkaddr, index,
+ NIX_INTF_RX, &entry, true);
+}
+
+void rvu_npc_disable_mcam_entries(struct rvu *rvu, u16 pcifunc, int nixlf)
+{
+ struct npc_mcam *mcam = &rvu->hw->mcam;
+ struct nix_rx_action action;
+ int blkaddr, index, bank;
+
+ blkaddr = rvu_get_blkaddr(rvu, BLKTYPE_NPC, 0);
+ if (blkaddr < 0)
+ return;
+
+ /* Disable ucast MCAM match entry of this PF/VF */
+ index = npc_get_nixlf_mcam_index(mcam, pcifunc,
+ nixlf, NIXLF_UCAST_ENTRY);
+ npc_enable_mcam_entry(rvu, mcam, blkaddr, index, false);
+
+ /* For PF, disable promisc and bcast MCAM match entries */
+ if (!(pcifunc & RVU_PFVF_FUNC_MASK)) {
+ index = npc_get_nixlf_mcam_index(mcam, pcifunc,
+ nixlf, NIXLF_BCAST_ENTRY);
+ /* For bcast, disable only if it's action is not
+ * packet replication, incase if action is replication
+ * then this PF's nixlf is removed from bcast replication
+ * list.
+ */
+ bank = npc_get_bank(mcam, index);
+ index &= (mcam->banksize - 1);
+ *(u64 *)&action = rvu_read64(rvu, blkaddr,
+ NPC_AF_MCAMEX_BANKX_ACTION(index, bank));
+ if (action.op != NIX_RX_ACTIONOP_MCAST)
+ npc_enable_mcam_entry(rvu, mcam, blkaddr, index, false);
+ }
+}
+
#define LDATA_EXTRACT_CONFIG(intf, lid, ltype, ld, cfg) \
rvu_write64(rvu, blkaddr, \
NPC_AF_INTFX_LIDX_LTX_LDX_CFG(intf, lid, ltype, ld), cfg)
--
2.7.4
next prev parent reply other threads:[~2018-10-23 2:17 UTC|newest]
Thread overview: 32+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-10-22 17:55 [PATCH v2 00/17] octeontx2-af: NPC parser and NIX blocks initialization sunil.kovvuri
2018-10-22 17:55 ` [PATCH v2 01/17] octeontx2-af: NIX Tx scheduler queues alloc/free sunil.kovvuri
2018-10-22 17:55 ` [PATCH v2 02/17] octeontx2-af: NIX Tx scheduler queue config support sunil.kovvuri
2018-10-22 17:55 ` [PATCH v2 03/17] octeontx2-af: Reset NIXLF's Rx/Tx stats sunil.kovvuri
2018-10-22 17:55 ` [PATCH v2 04/17] octeontx2-af: Add NPC KPU profile sunil.kovvuri
2018-10-22 17:55 ` [PATCH v2 05/17] octeontx2-af: Config NPC KPU engines with parser profile sunil.kovvuri
2018-10-26 12:07 ` Arnd Bergmann
2018-10-22 17:55 ` [PATCH v2 06/17] octeontx2-af: Config pkind for CGX mapped PFs sunil.kovvuri
2018-10-22 17:55 ` [PATCH v2 07/17] octeontx2-af: Broadcast packet replication support sunil.kovvuri
2018-10-22 17:55 ` [PATCH v2 08/17] octeontx2-af: Update bcast list upon NIXLF alloc/free sunil.kovvuri
2018-10-22 17:55 ` [PATCH v2 09/17] octeontx2-af: Support for VTAG strip and capture sunil.kovvuri
2018-10-22 17:55 ` [PATCH v2 10/17] octeontx2-af: Enable packet length and csum validation sunil.kovvuri
2018-10-22 17:55 ` [PATCH v2 11/17] octeontx2-af: NPC MCAM and LDATA extract minimal configuration sunil.kovvuri
2018-10-22 17:55 ` [PATCH v2 12/17] octeontx2-af: Add LMAC channel info to NIXLF_ALLOC response sunil.kovvuri
2018-10-22 17:56 ` sunil.kovvuri [this message]
2018-10-22 17:56 ` [PATCH v2 14/17] octeontx2-af: NIX Rx flowkey configuration for RSS sunil.kovvuri
2018-10-22 17:56 ` [PATCH v2 15/17] octeontx2-af: Support for changing RSS algorithm sunil.kovvuri
2018-10-22 17:56 ` [PATCH v2 16/17] octeontx2-af: Support for setting MAC address sunil.kovvuri
2018-10-22 17:56 ` [PATCH v2 17/17] octeontx2-af: Support for NIXLF's UCAST/PROMISC/ALLMULTI modes sunil.kovvuri
2018-10-23 3:19 ` [PATCH v2 00/17] octeontx2-af: NPC parser and NIX blocks initialization David Miller
2018-10-26 12:54 ` Arnd Bergmann
2018-10-26 13:29 ` Sunil Kovvuri
2018-10-26 14:04 ` Arnd Bergmann
2018-10-26 15:47 ` Andrew Lunn
2018-10-26 15:55 ` Arnd Bergmann
2018-10-26 16:26 ` Sunil Kovvuri
2018-10-26 16:33 ` Sunil Kovvuri
2018-10-26 19:28 ` Arnd Bergmann
2018-10-29 4:32 ` Sunil Kovvuri
2018-10-29 8:59 ` Arnd Bergmann
2018-10-26 17:16 ` Andrew Lunn
2018-10-26 17:19 ` David Miller
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1540230964-5506-14-git-send-email-sunil.kovvuri@gmail.com \
--to=sunil.kovvuri@gmail.com \
--cc=arnd@arndb.de \
--cc=davem@davemloft.net \
--cc=linux-soc@vger.kernel.org \
--cc=netdev@vger.kernel.org \
--cc=sgoutham@marvell.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.