From: James Bottomley <James.Bottomley@HansenPartnership.com>
To: Andrew Morton <akpm@linux-foundation.org>,
Linus Torvalds <torvalds@linux-foundation.org>
Cc: linux-scsi <linux-scsi@vger.kernel.org>,
linux-kernel <linux-kernel@vger.kernel.org>
Subject: [GIT PULL] final round of SCSI updates for the 4.19+ merge window
Date: Fri, 02 Nov 2018 14:41:03 -0700 [thread overview]
Message-ID: <1541194863.2824.2.camel@HansenPartnership.com> (raw)
This is a set of minor small (and safe changes) that didn't make the
initial pull request plus some bug fixes.
The patch is available here:
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi.git scsi-misc
The short changelog is:
Bart Van Assche (7):
scsi: qla2xxx: Remove two arguments from qlafx00_error_entry()
scsi: qla2xxx: Make sure that qlafx00_ioctl_iosb_entry() initializes 'res'
scsi: qla2xxx: Remove a set-but-not-used variable
scsi: qla2xxx: Make qla2x00_sysfs_write_nvram() easier to analyze
scsi: qla2xxx: Declare local functions 'static'
scsi: qla2xxx: Improve several kernel-doc headers
scsi: qla2xxx: Modify fall-through annotations
Nathan Chancellor (1):
scsi: 3w-sas: 3w-9xxx: Use unsigned char for cdb
Roland Dreier (2):
scsi: target: Don't request modules that aren't even built
scsi: target: Set response length for REPORT TARGET PORT GROUPS
Sabyasachi Gupta (1):
scsi: mvsas: Use dma_pool_zalloc
YueHaibing (1):
scsi: mvsas: Remove set but not used variable 'id'
And the diffstat:
drivers/scsi/3w-9xxx.c | 12 ++++++++----
drivers/scsi/3w-sas.c | 8 +++++---
drivers/scsi/mvsas/mv_sas.c | 6 ++----
drivers/scsi/qla2xxx/qla_attr.c | 2 +-
drivers/scsi/qla2xxx/qla_init.c | 7 ++++---
drivers/scsi/qla2xxx/qla_iocb.c | 4 ++--
drivers/scsi/qla2xxx/qla_isr.c | 6 +++---
drivers/scsi/qla2xxx/qla_mbx.c | 6 +++---
drivers/scsi/qla2xxx/qla_mr.c | 21 +++++++++------------
drivers/scsi/qla2xxx/qla_nx.c | 2 +-
drivers/scsi/qla2xxx/qla_nx2.c | 2 +-
drivers/scsi/qla2xxx/qla_os.c | 6 +++---
drivers/scsi/qla2xxx/qla_sup.c | 2 +-
drivers/scsi/qla2xxx/qla_target.c | 8 ++++----
drivers/target/target_core_alua.c | 2 +-
drivers/target/target_core_transport.c | 8 ++++----
16 files changed, 52 insertions(+), 50 deletions(-)
With full diff below.
James
---
diff --git a/drivers/scsi/3w-9xxx.c b/drivers/scsi/3w-9xxx.c
index 05293babb031..2d655a97b959 100644
--- a/drivers/scsi/3w-9xxx.c
+++ b/drivers/scsi/3w-9xxx.c
@@ -143,7 +143,9 @@ static int twa_poll_status_gone(TW_Device_Extension *tw_dev, u32 flag, int secon
static int twa_post_command_packet(TW_Device_Extension *tw_dev, int request_id, char internal);
static int twa_reset_device_extension(TW_Device_Extension *tw_dev);
static int twa_reset_sequence(TW_Device_Extension *tw_dev, int soft_reset);
-static int twa_scsiop_execute_scsi(TW_Device_Extension *tw_dev, int request_id, char *cdb, int use_sg, TW_SG_Entry *sglistarg);
+static int twa_scsiop_execute_scsi(TW_Device_Extension *tw_dev, int request_id,
+ unsigned char *cdb, int use_sg,
+ TW_SG_Entry *sglistarg);
static void twa_scsiop_execute_scsi_complete(TW_Device_Extension *tw_dev, int request_id);
static char *twa_string_lookup(twa_message_type *table, unsigned int aen_code);
@@ -278,7 +280,7 @@ static int twa_aen_complete(TW_Device_Extension *tw_dev, int request_id)
static int twa_aen_drain_queue(TW_Device_Extension *tw_dev, int no_check_reset)
{
int request_id = 0;
- char cdb[TW_MAX_CDB_LEN];
+ unsigned char cdb[TW_MAX_CDB_LEN];
TW_SG_Entry sglist[1];
int finished = 0, count = 0;
TW_Command_Full *full_command_packet;
@@ -423,7 +425,7 @@ static void twa_aen_queue_event(TW_Device_Extension *tw_dev, TW_Command_Apache_H
/* This function will read the aen queue from the isr */
static int twa_aen_read_queue(TW_Device_Extension *tw_dev, int request_id)
{
- char cdb[TW_MAX_CDB_LEN];
+ unsigned char cdb[TW_MAX_CDB_LEN];
TW_SG_Entry sglist[1];
TW_Command_Full *full_command_packet;
int retval = 1;
@@ -1798,7 +1800,9 @@ static int twa_scsi_queue_lck(struct scsi_cmnd *SCpnt, void (*done)(struct scsi_
static DEF_SCSI_QCMD(twa_scsi_queue)
/* This function hands scsi cdb's to the firmware */
-static int twa_scsiop_execute_scsi(TW_Device_Extension *tw_dev, int request_id, char *cdb, int use_sg, TW_SG_Entry *sglistarg)
+static int twa_scsiop_execute_scsi(TW_Device_Extension *tw_dev, int request_id,
+ unsigned char *cdb, int use_sg,
+ TW_SG_Entry *sglistarg)
{
TW_Command_Full *full_command_packet;
TW_Command_Apache *command_packet;
diff --git a/drivers/scsi/3w-sas.c b/drivers/scsi/3w-sas.c
index 266bdac75304..480cf82700e9 100644
--- a/drivers/scsi/3w-sas.c
+++ b/drivers/scsi/3w-sas.c
@@ -287,7 +287,9 @@ static int twl_post_command_packet(TW_Device_Extension *tw_dev, int request_id)
} /* End twl_post_command_packet() */
/* This function hands scsi cdb's to the firmware */
-static int twl_scsiop_execute_scsi(TW_Device_Extension *tw_dev, int request_id, char *cdb, int use_sg, TW_SG_Entry_ISO *sglistarg)
+static int twl_scsiop_execute_scsi(TW_Device_Extension *tw_dev, int request_id,
+ unsigned char *cdb, int use_sg,
+ TW_SG_Entry_ISO *sglistarg)
{
TW_Command_Full *full_command_packet;
TW_Command_Apache *command_packet;
@@ -372,7 +374,7 @@ static int twl_scsiop_execute_scsi(TW_Device_Extension *tw_dev, int request_id,
/* This function will read the aen queue from the isr */
static int twl_aen_read_queue(TW_Device_Extension *tw_dev, int request_id)
{
- char cdb[TW_MAX_CDB_LEN];
+ unsigned char cdb[TW_MAX_CDB_LEN];
TW_SG_Entry_ISO sglist[1];
TW_Command_Full *full_command_packet;
int retval = 1;
@@ -554,7 +556,7 @@ static int twl_poll_response(TW_Device_Extension *tw_dev, int request_id, int se
static int twl_aen_drain_queue(TW_Device_Extension *tw_dev, int no_check_reset)
{
int request_id = 0;
- char cdb[TW_MAX_CDB_LEN];
+ unsigned char cdb[TW_MAX_CDB_LEN];
TW_SG_Entry_ISO sglist[1];
int finished = 0, count = 0;
TW_Command_Full *full_command_packet;
diff --git a/drivers/scsi/mvsas/mv_sas.c b/drivers/scsi/mvsas/mv_sas.c
index 3df1428df317..311d23c727ce 100644
--- a/drivers/scsi/mvsas/mv_sas.c
+++ b/drivers/scsi/mvsas/mv_sas.c
@@ -790,12 +790,11 @@ static int mvs_task_prep(struct sas_task *task, struct mvs_info *mvi, int is_tmf
slot->n_elem = n_elem;
slot->slot_tag = tag;
- slot->buf = dma_pool_alloc(mvi->dma_pool, GFP_ATOMIC, &slot->buf_dma);
+ slot->buf = dma_pool_zalloc(mvi->dma_pool, GFP_ATOMIC, &slot->buf_dma);
if (!slot->buf) {
rc = -ENOMEM;
goto err_out_tag;
}
- memset(slot->buf, 0, MVS_SLOT_BUF_SZ);
tei.task = task;
tei.hdr = &mvi->slot[tag];
@@ -1906,8 +1905,7 @@ static void mvs_work_queue(struct work_struct *work)
if (phy->phy_event & PHY_PLUG_OUT) {
u32 tmp;
- struct sas_identify_frame *id;
- id = (struct sas_identify_frame *)phy->frame_rcvd;
+
tmp = MVS_CHIP_DISP->read_phy_ctl(mvi, phy_no);
phy->phy_event &= ~PHY_PLUG_OUT;
if (!(tmp & PHY_READY_MASK)) {
diff --git a/drivers/scsi/qla2xxx/qla_attr.c b/drivers/scsi/qla2xxx/qla_attr.c
index b28f159fdaee..0bb9ac6ece92 100644
--- a/drivers/scsi/qla2xxx/qla_attr.c
+++ b/drivers/scsi/qla2xxx/qla_attr.c
@@ -218,7 +218,7 @@ qla2x00_sysfs_write_nvram(struct file *filp, struct kobject *kobj,
mutex_lock(&ha->optrom_mutex);
if (qla2x00_chip_is_down(vha)) {
- mutex_unlock(&vha->hw->optrom_mutex);
+ mutex_unlock(&ha->optrom_mutex);
return -EAGAIN;
}
diff --git a/drivers/scsi/qla2xxx/qla_init.c b/drivers/scsi/qla2xxx/qla_init.c
index c72d8012fe2a..6fe20c27acc1 100644
--- a/drivers/scsi/qla2xxx/qla_init.c
+++ b/drivers/scsi/qla2xxx/qla_init.c
@@ -425,7 +425,7 @@ void qla24xx_handle_adisc_event(scsi_qla_host_t *vha, struct event_arg *ea)
__qla24xx_handle_gpdb_event(vha, ea);
}
-int qla_post_els_plogi_work(struct scsi_qla_host *vha, fc_port_t *fcport)
+static int qla_post_els_plogi_work(struct scsi_qla_host *vha, fc_port_t *fcport)
{
struct qla_work_evt *e;
@@ -680,7 +680,7 @@ static void qla24xx_handle_gnl_done_event(scsi_qla_host_t *vha,
fcport);
break;
}
- /* drop through */
+ /* fall through */
default:
if (fcport_is_smaller(fcport)) {
/* local adapter is bigger */
@@ -1551,7 +1551,8 @@ void qla24xx_handle_relogin_event(scsi_qla_host_t *vha,
}
-void qla_handle_els_plogi_done(scsi_qla_host_t *vha, struct event_arg *ea)
+static void qla_handle_els_plogi_done(scsi_qla_host_t *vha,
+ struct event_arg *ea)
{
ql_dbg(ql_dbg_disc, vha, 0x2118,
"%s %d %8phC post PRLI\n",
diff --git a/drivers/scsi/qla2xxx/qla_iocb.c b/drivers/scsi/qla2xxx/qla_iocb.c
index 86fb8b21aa71..032635321ad6 100644
--- a/drivers/scsi/qla2xxx/qla_iocb.c
+++ b/drivers/scsi/qla2xxx/qla_iocb.c
@@ -1195,8 +1195,8 @@ qla24xx_walk_and_build_prot_sglist(struct qla_hw_data *ha, srb_t *sp,
* @sp: SRB command to process
* @cmd_pkt: Command type 3 IOCB
* @tot_dsds: Total number of segments to transfer
- * @tot_prot_dsds:
- * @fw_prot_opts:
+ * @tot_prot_dsds: Total number of segments with protection information
+ * @fw_prot_opts: Protection options to be passed to firmware
*/
inline int
qla24xx_build_scsi_crc_2_iocbs(srb_t *sp, struct cmd_type_crc_2 *cmd_pkt,
diff --git a/drivers/scsi/qla2xxx/qla_isr.c b/drivers/scsi/qla2xxx/qla_isr.c
index d73b04e40590..30d3090842f8 100644
--- a/drivers/scsi/qla2xxx/qla_isr.c
+++ b/drivers/scsi/qla2xxx/qla_isr.c
@@ -25,7 +25,7 @@ static int qla2x00_error_entry(scsi_qla_host_t *, struct rsp_que *,
/**
* qla2100_intr_handler() - Process interrupts for the ISP2100 and ISP2200.
- * @irq:
+ * @irq: interrupt number
* @dev_id: SCSI driver HA context
*
* Called by system whenever the host adapter generates an interrupt.
@@ -144,7 +144,7 @@ qla2x00_check_reg16_for_disconnect(scsi_qla_host_t *vha, uint16_t reg)
/**
* qla2300_intr_handler() - Process interrupts for the ISP23xx and ISP63xx.
- * @irq:
+ * @irq: interrupt number
* @dev_id: SCSI driver HA context
*
* Called by system whenever the host adapter generates an interrupt.
@@ -3109,7 +3109,7 @@ qla2xxx_check_risc_status(scsi_qla_host_t *vha)
/**
* qla24xx_intr_handler() - Process interrupts for the ISP23xx and ISP24xx.
- * @irq:
+ * @irq: interrupt number
* @dev_id: SCSI driver HA context
*
* Called by system whenever the host adapter generates an interrupt.
diff --git a/drivers/scsi/qla2xxx/qla_mbx.c b/drivers/scsi/qla2xxx/qla_mbx.c
index 2f3e5075ae76..191b6b7c8747 100644
--- a/drivers/scsi/qla2xxx/qla_mbx.c
+++ b/drivers/scsi/qla2xxx/qla_mbx.c
@@ -3478,9 +3478,9 @@ qla8044_read_serdes_word(scsi_qla_host_t *vha, uint32_t addr, uint32_t *data)
/**
* qla2x00_set_serdes_params() -
* @vha: HA context
- * @sw_em_1g:
- * @sw_em_2g:
- * @sw_em_4g:
+ * @sw_em_1g: serial link options
+ * @sw_em_2g: serial link options
+ * @sw_em_4g: serial link options
*
* Returns
*/
diff --git a/drivers/scsi/qla2xxx/qla_mr.c b/drivers/scsi/qla2xxx/qla_mr.c
index 521a51370554..60f964c53c01 100644
--- a/drivers/scsi/qla2xxx/qla_mr.c
+++ b/drivers/scsi/qla2xxx/qla_mr.c
@@ -2212,7 +2212,7 @@ qlafx00_ioctl_iosb_entry(scsi_qla_host_t *vha, struct req_que *req,
struct bsg_job *bsg_job;
struct fc_bsg_reply *bsg_reply;
struct srb_iocb *iocb_job;
- int res;
+ int res = 0;
struct qla_mt_iocb_rsp_fx00 fstatus;
uint8_t *fw_sts_ptr;
@@ -2624,7 +2624,7 @@ qlafx00_status_cont_entry(struct rsp_que *rsp, sts_cont_entry_t *pkt)
* qlafx00_multistatus_entry() - Process Multi response queue entries.
* @vha: SCSI driver HA context
* @rsp: response queue
- * @pkt:
+ * @pkt: received packet
*/
static void
qlafx00_multistatus_entry(struct scsi_qla_host *vha,
@@ -2681,12 +2681,10 @@ qlafx00_multistatus_entry(struct scsi_qla_host *vha,
* @vha: SCSI driver HA context
* @rsp: response queue
* @pkt: Entry pointer
- * @estatus:
- * @etype:
*/
static void
qlafx00_error_entry(scsi_qla_host_t *vha, struct rsp_que *rsp,
- struct sts_entry_fx00 *pkt, uint8_t estatus, uint8_t etype)
+ struct sts_entry_fx00 *pkt)
{
srb_t *sp;
struct qla_hw_data *ha = vha->hw;
@@ -2695,9 +2693,6 @@ qlafx00_error_entry(scsi_qla_host_t *vha, struct rsp_que *rsp,
struct req_que *req = NULL;
int res = DID_ERROR << 16;
- ql_dbg(ql_dbg_async, vha, 0x507f,
- "type of error status in response: 0x%x\n", estatus);
-
req = ha->req_q_map[que];
sp = qla2x00_get_sp_from_handle(vha, func, req, pkt);
@@ -2745,9 +2740,11 @@ qlafx00_process_response_queue(struct scsi_qla_host *vha,
if (pkt->entry_status != 0 &&
pkt->entry_type != IOCTL_IOSB_TYPE_FX00) {
+ ql_dbg(ql_dbg_async, vha, 0x507f,
+ "type of error status in response: 0x%x\n",
+ pkt->entry_status);
qlafx00_error_entry(vha, rsp,
- (struct sts_entry_fx00 *)pkt, pkt->entry_status,
- pkt->entry_type);
+ (struct sts_entry_fx00 *)pkt);
continue;
}
@@ -2867,7 +2864,7 @@ qlafx00_async_event(scsi_qla_host_t *vha)
/**
* qlafx00x_mbx_completion() - Process mailbox command completions.
* @vha: SCSI driver HA context
- * @mb0:
+ * @mb0: value to be written into mailbox register 0
*/
static void
qlafx00_mbx_completion(scsi_qla_host_t *vha, uint32_t mb0)
@@ -2893,7 +2890,7 @@ qlafx00_mbx_completion(scsi_qla_host_t *vha, uint32_t mb0)
/**
* qlafx00_intr_handler() - Process interrupts for the ISPFX00.
- * @irq:
+ * @irq: interrupt number
* @dev_id: SCSI driver HA context
*
* Called by system whenever the host adapter generates an interrupt.
diff --git a/drivers/scsi/qla2xxx/qla_nx.c b/drivers/scsi/qla2xxx/qla_nx.c
index 121e18b3b9f8..f2f54806f4da 100644
--- a/drivers/scsi/qla2xxx/qla_nx.c
+++ b/drivers/scsi/qla2xxx/qla_nx.c
@@ -2010,7 +2010,7 @@ qla82xx_mbx_completion(scsi_qla_host_t *vha, uint16_t mb0)
/**
* qla82xx_intr_handler() - Process interrupts for the ISP23xx and ISP63xx.
- * @irq:
+ * @irq: interrupt number
* @dev_id: SCSI driver HA context
*
* Called by system whenever the host adapter generates an interrupt.
diff --git a/drivers/scsi/qla2xxx/qla_nx2.c b/drivers/scsi/qla2xxx/qla_nx2.c
index 3a2b0282df14..fe856b602e03 100644
--- a/drivers/scsi/qla2xxx/qla_nx2.c
+++ b/drivers/scsi/qla2xxx/qla_nx2.c
@@ -3878,7 +3878,7 @@ qla8044_write_optrom_data(struct scsi_qla_host *vha, uint8_t *buf,
#define PF_BITS_MASK (0xF << 16)
/**
* qla8044_intr_handler() - Process interrupts for the ISP8044
- * @irq:
+ * @irq: interrupt number
* @dev_id: SCSI driver HA context
*
* Called by system whenever the host adapter generates an interrupt.
diff --git a/drivers/scsi/qla2xxx/qla_os.c b/drivers/scsi/qla2xxx/qla_os.c
index dba672f87cb2..01607d2f2c34 100644
--- a/drivers/scsi/qla2xxx/qla_os.c
+++ b/drivers/scsi/qla2xxx/qla_os.c
@@ -1749,7 +1749,7 @@ qla2x00_loop_reset(scsi_qla_host_t *vha)
static void
__qla2x00_abort_all_cmds(struct qla_qpair *qp, int res)
{
- int cnt, status;
+ int cnt;
unsigned long flags;
srb_t *sp;
scsi_qla_host_t *vha = qp->vha;
@@ -1799,8 +1799,8 @@ __qla2x00_abort_all_cmds(struct qla_qpair *qp, int res)
if (!sp_get(sp)) {
spin_unlock_irqrestore
(qp->qp_lock_ptr, flags);
- status = qla2xxx_eh_abort(
- GET_CMD_SP(sp));
+ qla2xxx_eh_abort(
+ GET_CMD_SP(sp));
spin_lock_irqsave
(qp->qp_lock_ptr, flags);
}
diff --git a/drivers/scsi/qla2xxx/qla_sup.c b/drivers/scsi/qla2xxx/qla_sup.c
index 4499c787165f..2a3055c799fb 100644
--- a/drivers/scsi/qla2xxx/qla_sup.c
+++ b/drivers/scsi/qla2xxx/qla_sup.c
@@ -2229,7 +2229,7 @@ qla2x00_erase_flash_sector(struct qla_hw_data *ha, uint32_t addr,
/**
* qla2x00_get_flash_manufacturer() - Read manufacturer ID from flash chip.
- * @ha:
+ * @ha: host adapter
* @man_id: Flash manufacturer ID
* @flash_id: Flash ID
*/
diff --git a/drivers/scsi/qla2xxx/qla_target.c b/drivers/scsi/qla2xxx/qla_target.c
index 39828207bc1d..c4504740f0e2 100644
--- a/drivers/scsi/qla2xxx/qla_target.c
+++ b/drivers/scsi/qla2xxx/qla_target.c
@@ -4540,7 +4540,7 @@ static int qlt_issue_task_mgmt(struct fc_port *sess, u64 lun,
case QLA_TGT_CLEAR_TS:
case QLA_TGT_ABORT_TS:
abort_cmds_for_lun(vha, lun, a->u.isp24.fcp_hdr.s_id);
- /* drop through */
+ /* fall through */
case QLA_TGT_CLEAR_ACA:
h = qlt_find_qphint(vha, mcmd->unpacked_lun);
mcmd->qpair = h->qpair;
@@ -6598,9 +6598,9 @@ static void qlt_lport_dump(struct scsi_qla_host *vha, u64 wwpn,
* qla_tgt_lport_register - register lport with external module
*
* @target_lport_ptr: pointer for tcm_qla2xxx specific lport data
- * @phys_wwpn:
- * @npiv_wwpn:
- * @npiv_wwnn:
+ * @phys_wwpn: physical port WWPN
+ * @npiv_wwpn: NPIV WWPN
+ * @npiv_wwnn: NPIV WWNN
* @callback: lport initialization callback for tcm_qla2xxx code
*/
int qlt_lport_register(void *target_lport_ptr, u64 phys_wwpn,
diff --git a/drivers/target/target_core_alua.c b/drivers/target/target_core_alua.c
index e46ca968009c..4f134b0c3e29 100644
--- a/drivers/target/target_core_alua.c
+++ b/drivers/target/target_core_alua.c
@@ -268,7 +268,7 @@ target_emulate_report_target_port_groups(struct se_cmd *cmd)
}
transport_kunmap_data_sg(cmd);
- target_complete_cmd(cmd, GOOD);
+ target_complete_cmd_with_length(cmd, GOOD, rd_len + 4);
return 0;
}
diff --git a/drivers/target/target_core_transport.c b/drivers/target/target_core_transport.c
index 4cf33e2cc705..e31e4fc31aa1 100644
--- a/drivers/target/target_core_transport.c
+++ b/drivers/target/target_core_transport.c
@@ -205,19 +205,19 @@ void transport_subsystem_check_init(void)
if (sub_api_initialized)
return;
- ret = request_module("target_core_iblock");
+ ret = IS_ENABLED(CONFIG_TCM_IBLOCK) && request_module("target_core_iblock");
if (ret != 0)
pr_err("Unable to load target_core_iblock\n");
- ret = request_module("target_core_file");
+ ret = IS_ENABLED(CONFIG_TCM_FILEIO) && request_module("target_core_file");
if (ret != 0)
pr_err("Unable to load target_core_file\n");
- ret = request_module("target_core_pscsi");
+ ret = IS_ENABLED(CONFIG_TCM_PSCSI) && request_module("target_core_pscsi");
if (ret != 0)
pr_err("Unable to load target_core_pscsi\n");
- ret = request_module("target_core_user");
+ ret = IS_ENABLED(CONFIG_TCM_USER2) && request_module("target_core_user");
if (ret != 0)
pr_err("Unable to load target_core_user\n");
next reply other threads:[~2018-11-02 21:41 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-11-02 21:41 James Bottomley [this message]
2018-11-03 17:38 ` [GIT PULL] final round of SCSI updates for the 4.19+ merge window Linus Torvalds
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1541194863.2824.2.camel@HansenPartnership.com \
--to=james.bottomley@hansenpartnership.com \
--cc=akpm@linux-foundation.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-scsi@vger.kernel.org \
--cc=torvalds@linux-foundation.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.