From: Eial Czerwacki <eial@scalemp.com>
To: linux-kernel@vger.kernel.org
Cc: Eial Czerwacki <eial@scalemp.com>,
Juergen Gross <jgross@suse.com>,
Thomas Gleixner <tglx@linutronix.de>
Subject: [PATCH] x86/vsmp: Remove dependency on pv_irq_ops
Date: Mon, 5 Nov 2018 10:01:04 +0200 [thread overview]
Message-ID: <1541404864-31603-1-git-send-email-eial@scalemp.com> (raw)
vsmp dependency on pv_irq_ops removed some years ago, so now let's clean it up from vsmp_64.c.
In short, "cap & ctl & (1 << 4)" was always returning 0, as such we can
remove all the PARAVIRT/PARAVIRT_XXL code handling that.
However, the rest of the code depends on CONFIG_PCI, so fix it accordingly.
in addition, rename set_vsmp_pv_ops to set_vsmp_ctl.
Signed-off-by: Eial Czerwacki <eial@scalemp.com>
Acked-by: Shai Fultheim <shai@scalemp.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
---
arch/x86/Kconfig | 1 -
arch/x86/kernel/vsmp_64.c | 84 ++++-------------------------------------------
2 files changed, 7 insertions(+), 78 deletions(-)
diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig
index ba7e346..9d734f3 100644
--- a/arch/x86/Kconfig
+++ b/arch/x86/Kconfig
@@ -525,7 +525,6 @@ config X86_VSMP
bool "ScaleMP vSMP"
select HYPERVISOR_GUEST
select PARAVIRT
- select PARAVIRT_XXL
depends on X86_64 && PCI
depends on X86_EXTENDED_PLATFORM
depends on SMP
diff --git a/arch/x86/kernel/vsmp_64.c b/arch/x86/kernel/vsmp_64.c
index 1eae5af..4862576 100644
--- a/arch/x86/kernel/vsmp_64.c
+++ b/arch/x86/kernel/vsmp_64.c
@@ -26,65 +26,8 @@
#define TOPOLOGY_REGISTER_OFFSET 0x10
-#if defined CONFIG_PCI && defined CONFIG_PARAVIRT_XXL
-/*
- * Interrupt control on vSMPowered systems:
- * ~AC is a shadow of IF. If IF is 'on' AC should be 'off'
- * and vice versa.
- */
-
-asmlinkage __visible unsigned long vsmp_save_fl(void)
-{
- unsigned long flags = native_save_fl();
-
- if (!(flags & X86_EFLAGS_IF) || (flags & X86_EFLAGS_AC))
- flags &= ~X86_EFLAGS_IF;
- return flags;
-}
-PV_CALLEE_SAVE_REGS_THUNK(vsmp_save_fl);
-
-__visible void vsmp_restore_fl(unsigned long flags)
-{
- if (flags & X86_EFLAGS_IF)
- flags &= ~X86_EFLAGS_AC;
- else
- flags |= X86_EFLAGS_AC;
- native_restore_fl(flags);
-}
-PV_CALLEE_SAVE_REGS_THUNK(vsmp_restore_fl);
-
-asmlinkage __visible void vsmp_irq_disable(void)
-{
- unsigned long flags = native_save_fl();
-
- native_restore_fl((flags & ~X86_EFLAGS_IF) | X86_EFLAGS_AC);
-}
-PV_CALLEE_SAVE_REGS_THUNK(vsmp_irq_disable);
-
-asmlinkage __visible void vsmp_irq_enable(void)
-{
- unsigned long flags = native_save_fl();
-
- native_restore_fl((flags | X86_EFLAGS_IF) & (~X86_EFLAGS_AC));
-}
-PV_CALLEE_SAVE_REGS_THUNK(vsmp_irq_enable);
-
-static unsigned __init vsmp_patch(u8 type, void *ibuf,
- unsigned long addr, unsigned len)
-{
- switch (type) {
- case PARAVIRT_PATCH(irq.irq_enable):
- case PARAVIRT_PATCH(irq.irq_disable):
- case PARAVIRT_PATCH(irq.save_fl):
- case PARAVIRT_PATCH(irq.restore_fl):
- return paravirt_patch_default(type, ibuf, addr, len);
- default:
- return native_patch(type, ibuf, addr, len);
- }
-
-}
-
-static void __init set_vsmp_pv_ops(void)
+#if defined CONFIG_PCI
+static void __init set_vsmp_ctl(void)
{
void __iomem *address;
unsigned int cap, ctl, cfg;
@@ -109,28 +52,12 @@ static void __init set_vsmp_pv_ops(void)
}
#endif
- if (cap & ctl & (1 << 4)) {
- /* Setup irq ops and turn on vSMP IRQ fastpath handling */
- pv_ops.irq.irq_disable = PV_CALLEE_SAVE(vsmp_irq_disable);
- pv_ops.irq.irq_enable = PV_CALLEE_SAVE(vsmp_irq_enable);
- pv_ops.irq.save_fl = PV_CALLEE_SAVE(vsmp_save_fl);
- pv_ops.irq.restore_fl = PV_CALLEE_SAVE(vsmp_restore_fl);
- pv_ops.init.patch = vsmp_patch;
- ctl &= ~(1 << 4);
- }
writel(ctl, address + 4);
ctl = readl(address + 4);
pr_info("vSMP CTL: control set to:0x%08x\n", ctl);
early_iounmap(address, 8);
}
-#else
-static void __init set_vsmp_pv_ops(void)
-{
-}
-#endif
-
-#ifdef CONFIG_PCI
static int is_vsmp = -1;
static void __init detect_vsmp_box(void)
@@ -164,11 +91,14 @@ static int is_vsmp_box(void)
{
return 0;
}
+static void __init set_vsmp_ctl(void)
+{
+}
#endif
static void __init vsmp_cap_cpus(void)
{
-#if !defined(CONFIG_X86_VSMP) && defined(CONFIG_SMP)
+#if !defined(CONFIG_X86_VSMP) && defined(CONFIG_SMP) && defined(CONFIG_PCI)
void __iomem *address;
unsigned int cfg, topology, node_shift, maxcpus;
@@ -221,6 +151,6 @@ void __init vsmp_init(void)
vsmp_cap_cpus();
- set_vsmp_pv_ops();
+ set_vsmp_ctl();
return;
}
--
2.7.4
next reply other threads:[~2018-11-05 8:01 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-11-05 8:01 Eial Czerwacki [this message]
2018-11-05 11:36 ` [tip:x86/urgent] x86/vsmp: Remove dependency on pv_irq_ops tip-bot for Eial Czerwacki
2018-11-05 15:41 ` Ingo Molnar
2018-11-05 15:44 ` Thomas Gleixner
2018-11-05 16:40 ` Eial Czerwacki
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1541404864-31603-1-git-send-email-eial@scalemp.com \
--to=eial@scalemp.com \
--cc=jgross@suse.com \
--cc=linux-kernel@vger.kernel.org \
--cc=tglx@linutronix.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.