Re: The failure summary report of GEN2 for linux stable v4.10-rc2

[Laurent Pinchart <laurent.pinchart@ideasonboard.com>]

Hello Dong,

On Monday 16 Jan 2017 18:29:30 カオ・ヴァン・ドン wrote:
> Hi all,
> 
> We have tested the linux v4.10-rc2 for Gen2 Lager and Koelsch
> 
> So we would like to report the summary of the failure.

Thank you for the report.

I've retested the HDMI output on Lager running v4.10-rc2 with 
shmobile_defconfig using your test method (with the bmap application) and I 
haven't been to reproduce the problem. I have also tested v4.8 and v4.9, and 
both worked fine as well.

The kernel was started with the HDMI cable unplugged in all tests. If I boot 
the board with the cable plugged in, framebuffer allocation fails due to CMA 
being disabled. Enabling CMA makes the test pass on all three kernels, both 
with the HDMI cable plugged at boot and plugged after boot.

If you can still reproduce the problem on your side, could you please provide 
me with a very detailed test procedure (including the kernel .config and any 
test application or data you're using) ?

-- 
Regards,

Laurent Pinchart