All of lore.kernel.org
 help / color / mirror / Atom feed
From: Frederic Weisbecker <frederic@kernel.org>
To: LKML <linux-kernel@vger.kernel.org>
Cc: Frederic Weisbecker <frederic@kernel.org>,
	Peter Zijlstra <peterz@infradead.org>,
	Wanpeng Li <wanpengli@tencent.com>,
	Thomas Gleixner <tglx@linutronix.de>,
	Yauheni Kaliuta <yauheni.kaliuta@redhat.com>,
	Ingo Molnar <mingo@kernel.org>, Rik van Riel <riel@redhat.com>
Subject: [PATCH 04/25] vtime: Spare a seqcount lock/unlock cycle on context switch
Date: Wed, 14 Nov 2018 03:45:48 +0100	[thread overview]
Message-ID: <1542163569-20047-5-git-send-email-frederic@kernel.org> (raw)
In-Reply-To: <1542163569-20047-1-git-send-email-frederic@kernel.org>

On context switch we are locking the vtime seqcount of the scheduling-out
task twice:

 * On vtime_task_switch_common(), when we flush the pending vtime through
   vtime_account_system() / vtime_account_idle()

 * On arch_vtime_task_switch() to reset the vtime state.

This is pointless as these actions can be performed without the need
to unlock/lock in the middle. The reason these steps are separated is to
consolidate a very small amount of common code between
CONFIG_VIRT_CPU_ACCOUNTING_GEN and CONFIG_VIRT_CPU_ACCOUNTING_NATIVE.

Performance in this fast path is definetly a priority over artificial
code factorization so split the task switch code between GEN and
NATIVE and mutualize the parts than can run under a single seqcount
locked block.

Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Cc: Yauheni Kaliuta <yauheni.kaliuta@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Rik van Riel <riel@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Wanpeng Li <wanpengli@tencent.com>
Cc: Ingo Molnar <mingo@kernel.org>
---
 include/linux/vtime.h  | 32 ++++++++++++++++----------------
 kernel/sched/cputime.c | 38 +++++++++++++++++++++-----------------
 2 files changed, 37 insertions(+), 33 deletions(-)

diff --git a/include/linux/vtime.h b/include/linux/vtime.h
index 2fd247f..d9160ab 100644
--- a/include/linux/vtime.h
+++ b/include/linux/vtime.h
@@ -14,8 +14,12 @@ struct task_struct;
  * vtime_accounting_cpu_enabled() definitions/declarations
  */
 #if defined(CONFIG_VIRT_CPU_ACCOUNTING_NATIVE)
+
 static inline bool vtime_accounting_cpu_enabled(void) { return true; }
+extern void vtime_task_switch(struct task_struct *prev);
+
 #elif defined(CONFIG_VIRT_CPU_ACCOUNTING_GEN)
+
 /*
  * Checks if vtime is enabled on some CPU. Cputime readers want to be careful
  * in that case and compute the tickless cputime.
@@ -36,33 +40,29 @@ static inline bool vtime_accounting_cpu_enabled(void)
 
 	return false;
 }
+
+extern void vtime_task_switch_generic(struct task_struct *prev);
+
+static inline void vtime_task_switch(struct task_struct *prev)
+{
+	if (vtime_accounting_cpu_enabled())
+		vtime_task_switch_generic(prev);
+}
+
 #else /* !CONFIG_VIRT_CPU_ACCOUNTING */
+
 static inline bool vtime_accounting_cpu_enabled(void) { return false; }
-#endif
+static inline void vtime_task_switch(struct task_struct *prev) { }
 
+#endif
 
 /*
  * Common vtime APIs
  */
 #ifdef CONFIG_VIRT_CPU_ACCOUNTING
-
-#ifdef __ARCH_HAS_VTIME_TASK_SWITCH
-extern void vtime_task_switch(struct task_struct *prev);
-#else
-extern void vtime_common_task_switch(struct task_struct *prev);
-static inline void vtime_task_switch(struct task_struct *prev)
-{
-	if (vtime_accounting_cpu_enabled())
-		vtime_common_task_switch(prev);
-}
-#endif /* __ARCH_HAS_VTIME_TASK_SWITCH */
-
 extern void vtime_account_kernel(struct task_struct *tsk);
 extern void vtime_account_idle(struct task_struct *tsk);
-
 #else /* !CONFIG_VIRT_CPU_ACCOUNTING */
-
-static inline void vtime_task_switch(struct task_struct *prev) { }
 static inline void vtime_account_kernel(struct task_struct *tsk) { }
 #endif /* !CONFIG_VIRT_CPU_ACCOUNTING */
 
diff --git a/kernel/sched/cputime.c b/kernel/sched/cputime.c
index 63f10ac..facc665 100644
--- a/kernel/sched/cputime.c
+++ b/kernel/sched/cputime.c
@@ -404,9 +404,10 @@ static inline void irqtime_account_process_tick(struct task_struct *p, int user_
 /*
  * Use precise platform statistics if available:
  */
-#ifdef CONFIG_VIRT_CPU_ACCOUNTING
+#ifdef CONFIG_VIRT_CPU_ACCOUNTING_NATIVE
+
 # ifndef __ARCH_HAS_VTIME_TASK_SWITCH
-void vtime_common_task_switch(struct task_struct *prev)
+void vtime_task_switch(struct task_struct *prev)
 {
 	if (is_idle_task(prev))
 		vtime_account_idle(prev);
@@ -417,10 +418,7 @@ void vtime_common_task_switch(struct task_struct *prev)
 	arch_vtime_task_switch(prev);
 }
 # endif
-#endif /* CONFIG_VIRT_CPU_ACCOUNTING */
 
-
-#ifdef CONFIG_VIRT_CPU_ACCOUNTING_NATIVE
 /*
  * Archs that account the whole time spent in the idle task
  * (outside irq) as idle time can rely on this and just implement
@@ -730,19 +728,25 @@ static void vtime_account_guest(struct task_struct *tsk,
 	}
 }
 
-void vtime_account_kernel(struct task_struct *tsk)
+static void __vtime_account_kernel(struct task_struct *tsk,
+				   struct vtime *vtime)
 {
-	struct vtime *vtime = &tsk->vtime;
-
-	if (!vtime_delta(vtime))
-		return;
-
-	write_seqcount_begin(&vtime->seqcount);
 	/* We might have scheduled out from guest path */
 	if (tsk->flags & PF_VCPU)
 		vtime_account_guest(tsk, vtime);
 	else
 		vtime_account_system(tsk, vtime);
+}
+
+void vtime_account_kernel(struct task_struct *tsk)
+{
+	struct vtime *vtime = &tsk->vtime;
+
+	if (!vtime_delta(vtime))
+		return;
+
+	write_seqcount_begin(&vtime->seqcount);
+	__vtime_account_kernel(tsk, vtime);
 	write_seqcount_end(&vtime->seqcount);
 }
 
@@ -800,18 +804,18 @@ EXPORT_SYMBOL_GPL(vtime_guest_exit);
 
 void vtime_account_idle(struct task_struct *tsk)
 {
-	struct vtime *vtime = &tsk->vtime;
-
-	write_seqcount_begin(&vtime->seqcount);
 	account_idle_time(get_vtime_delta(&tsk->vtime));
-	write_seqcount_end(&vtime->seqcount);
 }
 
-void arch_vtime_task_switch(struct task_struct *prev)
+void vtime_task_switch_generic(struct task_struct *prev)
 {
 	struct vtime *vtime = &prev->vtime;
 
 	write_seqcount_begin(&vtime->seqcount);
+	if (is_idle_task(prev))
+		vtime_account_idle(prev);
+	else
+		__vtime_account_kernel(prev, vtime);
 	vtime->state = VTIME_INACTIVE;
 	write_seqcount_end(&vtime->seqcount);
 
-- 
2.7.4


  parent reply	other threads:[~2018-11-14  2:46 UTC|newest]

Thread overview: 45+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-11-14  2:45 [PATCH 00/25] sched/nohz: Make kcpustat vtime aware (Fix kcpustat on nohz_full) Frederic Weisbecker
2018-11-14  2:45 ` [PATCH 01/25] sched/vtime: Fix guest/system mis-accounting on task switch Frederic Weisbecker
2018-11-14  2:45 ` [PATCH 02/25] sched/vtime: Protect idle accounting under vtime seqcount Frederic Weisbecker
2018-11-20 13:19   ` Peter Zijlstra
2018-11-14  2:45 ` [PATCH 03/25] vtime: Rename vtime_account_system() to vtime_account_kernel() Frederic Weisbecker
2018-11-14  2:45 ` Frederic Weisbecker [this message]
2018-11-20 13:25   ` [PATCH 04/25] vtime: Spare a seqcount lock/unlock cycle on context switch Peter Zijlstra
2019-09-25 14:42     ` Frederic Weisbecker
2018-11-14  2:45 ` [PATCH 05/25] sched/vtime: Record CPU under seqcount for kcpustat needs Frederic Weisbecker
2018-11-14  2:45 ` [PATCH 06/25] sched/cputime: Add vtime idle task state Frederic Weisbecker
2018-11-14  2:45 ` [PATCH 07/25] sched/cputime: Add vtime guest " Frederic Weisbecker
2018-11-14  2:45 ` [PATCH 08/25] vtime: Exit vtime before exit_notify() Frederic Weisbecker
2018-11-20 13:54   ` Peter Zijlstra
2018-11-14  2:45 ` [PATCH 09/25] kcpustat: Track running task following vtime sequences Frederic Weisbecker
2018-11-20 13:58   ` Peter Zijlstra
2018-11-14  2:45 ` [PATCH 10/25] context_tracking: Remove context_tracking_active() Frederic Weisbecker
2018-11-14  2:45 ` [PATCH 11/25] context_tracking: s/context_tracking_is_enabled/context_tracking_enabled() Frederic Weisbecker
2018-11-14  2:45 ` [PATCH 12/25] context_tracking: Rename context_tracking_is_cpu_enabled() to context_tracking_enabled_this_cpu() Frederic Weisbecker
2018-11-14  2:45 ` [PATCH 13/25] context_tracking: Introduce context_tracking_enabled_cpu() Frederic Weisbecker
2018-11-20 14:02   ` Peter Zijlstra
2018-11-14  2:45 ` [PATCH 14/25] sched/vtime: Rename vtime_accounting_cpu_enabled() to vtime_accounting_enabled_this_cpu() Frederic Weisbecker
2018-11-14  2:45 ` [PATCH 15/25] sched/vtime: Introduce vtime_accounting_enabled_cpu() Frederic Weisbecker
2018-11-20 14:04   ` Peter Zijlstra
2018-11-14  2:46 ` [PATCH 16/25] sched/cputime: Allow to pass cputime index on user/guest accounting Frederic Weisbecker
2018-11-14  2:46 ` [PATCH 17/25] sched/cputime: Standardize the kcpustat index based accounting functions Frederic Weisbecker
2018-11-14  2:46 ` [PATCH 18/25] vtime: Track nice-ness on top of context switch Frederic Weisbecker
2018-11-20 14:09   ` Peter Zijlstra
2018-11-14  2:46 ` [PATCH 19/25] sched/vite: Handle nice updates under vtime Frederic Weisbecker
2018-11-20 14:17   ` Peter Zijlstra
2018-11-26 15:53     ` Frederic Weisbecker
2018-11-26 16:11       ` Peter Zijlstra
2018-11-26 18:41         ` Frederic Weisbecker
2018-11-14  2:46 ` [PATCH 20/25] sched/kcpustat: Introduce vtime-aware kcpustat accessor Frederic Weisbecker
2018-11-20 14:23   ` Peter Zijlstra
2018-11-20 22:40     ` Frederic Weisbecker
2018-11-21  8:18       ` Peter Zijlstra
2018-11-21  8:35         ` Peter Zijlstra
2018-11-21 16:33         ` Frederic Weisbecker
2018-11-14  2:46 ` [PATCH 21/25] procfs: Use vtime aware " Frederic Weisbecker
2018-11-20 14:24   ` Peter Zijlstra
2018-11-20 22:31     ` Frederic Weisbecker
2018-11-14  2:46 ` [PATCH 22/25] cpufreq: " Frederic Weisbecker
2018-11-14  2:46 ` [PATCH 23/25] leds: Use vtime aware kcpustat accessors Frederic Weisbecker
2018-11-14  2:46 ` [PATCH 24/25] rackmeter: " Frederic Weisbecker
2018-11-14  2:46 ` [PATCH 25/25] sched/vtime: Clarify vtime_task_switch() argument layout Frederic Weisbecker

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1542163569-20047-5-git-send-email-frederic@kernel.org \
    --to=frederic@kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=mingo@kernel.org \
    --cc=peterz@infradead.org \
    --cc=riel@redhat.com \
    --cc=tglx@linutronix.de \
    --cc=wanpengli@tencent.com \
    --cc=yauheni.kaliuta@redhat.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.