From: James Bottomley <James.Bottomley@HansenPartnership.com>
To: Andrew Morton <akpm@linux-foundation.org>,
Linus Torvalds <torvalds@linux-foundation.org>
Cc: linux-scsi <linux-scsi@vger.kernel.org>,
linux-kernel <linux-kernel@vger.kernel.org>
Subject: [GIT PULL] SCSI fixes for 4.20-rc3
Date: Wed, 21 Nov 2018 21:34:13 -0800 [thread overview]
Message-ID: <1542864853.23253.6.camel@HansenPartnership.com> (raw)
Two small fixes. The qla2xxx is a regression from 4.18 and the ufs one
is a device enablement fix.
The patch is available here:
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi.git scsi-fixes
The short changelog is:
Bill Kuzeja (1):
scsi: qla2xxx: Timeouts occur on surprise removal of QLogic adapter
Wei Li (1):
scsi: ufs: Fix hynix ufs bug with quirk on hi36xx SoC
And the diffstat:
drivers/scsi/qla2xxx/qla_os.c | 10 ++++++++--
drivers/scsi/ufs/ufs-hisi.c | 9 +++++++++
drivers/scsi/ufs/ufs_quirks.h | 6 ++++++
drivers/scsi/ufs/ufshcd.c | 2 ++
4 files changed, 25 insertions(+), 2 deletions(-)
With full diff below.
James
---
diff --git a/drivers/scsi/qla2xxx/qla_os.c b/drivers/scsi/qla2xxx/qla_os.c
index 20c85eed1a75..b658b9a5eb1e 100644
--- a/drivers/scsi/qla2xxx/qla_os.c
+++ b/drivers/scsi/qla2xxx/qla_os.c
@@ -1749,7 +1749,7 @@ qla2x00_loop_reset(scsi_qla_host_t *vha)
static void
__qla2x00_abort_all_cmds(struct qla_qpair *qp, int res)
{
- int cnt;
+ int cnt, status;
unsigned long flags;
srb_t *sp;
scsi_qla_host_t *vha = qp->vha;
@@ -1799,10 +1799,16 @@ __qla2x00_abort_all_cmds(struct qla_qpair *qp, int res)
if (!sp_get(sp)) {
spin_unlock_irqrestore
(qp->qp_lock_ptr, flags);
- qla2xxx_eh_abort(
+ status = qla2xxx_eh_abort(
GET_CMD_SP(sp));
spin_lock_irqsave
(qp->qp_lock_ptr, flags);
+ /*
+ * Get rid of extra reference caused
+ * by early exit from qla2xxx_eh_abort
+ */
+ if (status == FAST_IO_FAIL)
+ atomic_dec(&sp->ref_count);
}
}
sp->done(sp, res);
diff --git a/drivers/scsi/ufs/ufs-hisi.c b/drivers/scsi/ufs/ufs-hisi.c
index 46df707e6f2c..452e19f8fb47 100644
--- a/drivers/scsi/ufs/ufs-hisi.c
+++ b/drivers/scsi/ufs/ufs-hisi.c
@@ -20,6 +20,7 @@
#include "unipro.h"
#include "ufs-hisi.h"
#include "ufshci.h"
+#include "ufs_quirks.h"
static int ufs_hisi_check_hibern8(struct ufs_hba *hba)
{
@@ -390,6 +391,14 @@ static void ufs_hisi_set_dev_cap(struct ufs_hisi_dev_params *hisi_param)
static void ufs_hisi_pwr_change_pre_change(struct ufs_hba *hba)
{
+ if (hba->dev_quirks & UFS_DEVICE_QUIRK_HOST_VS_DEBUGSAVECONFIGTIME) {
+ pr_info("ufs flash device must set VS_DebugSaveConfigTime 0x10\n");
+ /* VS_DebugSaveConfigTime */
+ ufshcd_dme_set(hba, UIC_ARG_MIB(0xD0A0), 0x10);
+ /* sync length */
+ ufshcd_dme_set(hba, UIC_ARG_MIB(0x1556), 0x48);
+ }
+
/* update */
ufshcd_dme_set(hba, UIC_ARG_MIB(0x15A8), 0x1);
/* PA_TxSkip */
diff --git a/drivers/scsi/ufs/ufs_quirks.h b/drivers/scsi/ufs/ufs_quirks.h
index 71f73d1d1ad1..5d2dfdb41a6f 100644
--- a/drivers/scsi/ufs/ufs_quirks.h
+++ b/drivers/scsi/ufs/ufs_quirks.h
@@ -131,4 +131,10 @@ struct ufs_dev_fix {
*/
#define UFS_DEVICE_QUIRK_HOST_PA_SAVECONFIGTIME (1 << 8)
+/*
+ * Some UFS devices require VS_DebugSaveConfigTime is 0x10,
+ * enabling this quirk ensure this.
+ */
+#define UFS_DEVICE_QUIRK_HOST_VS_DEBUGSAVECONFIGTIME (1 << 9)
+
#endif /* UFS_QUIRKS_H_ */
diff --git a/drivers/scsi/ufs/ufshcd.c b/drivers/scsi/ufs/ufshcd.c
index 27db55b0ca7f..f1c57cd33b5b 100644
--- a/drivers/scsi/ufs/ufshcd.c
+++ b/drivers/scsi/ufs/ufshcd.c
@@ -231,6 +231,8 @@ static struct ufs_dev_fix ufs_fixups[] = {
UFS_FIX(UFS_VENDOR_SKHYNIX, UFS_ANY_MODEL, UFS_DEVICE_NO_VCCQ),
UFS_FIX(UFS_VENDOR_SKHYNIX, UFS_ANY_MODEL,
UFS_DEVICE_QUIRK_HOST_PA_SAVECONFIGTIME),
+ UFS_FIX(UFS_VENDOR_SKHYNIX, "hB8aL1" /*H28U62301AMR*/,
+ UFS_DEVICE_QUIRK_HOST_VS_DEBUGSAVECONFIGTIME),
END_FIX
};
next reply other threads:[~2018-11-22 5:34 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-11-22 5:34 James Bottomley [this message]
2018-11-22 17:05 ` [GIT PULL] SCSI fixes for 4.20-rc3 pr-tracker-bot
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1542864853.23253.6.camel@HansenPartnership.com \
--to=james.bottomley@hansenpartnership.com \
--cc=akpm@linux-foundation.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-scsi@vger.kernel.org \
--cc=torvalds@linux-foundation.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.