[PATCH v2 1/2] Doc: bindings: Add binding doc for nxp system counter timer

[Jacky Bai <ping.bai@nxp.com>]

Add the binding doc for nxp system counter timer module.

Signed-off-by: Bai Ping <ping.bai@nxp.com>
---
change v1->v2
 - remove the blank line at EOF
---
 .../devicetree/bindings/timer/nxp,sysctr_timer.txt | 26 ++++++++++++++++++++++
 1 file changed, 26 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/timer/nxp,sysctr_timer.txt

diff --git a/Documentation/devicetree/bindings/timer/nxp,sysctr_timer.txt b/Documentation/devicetree/bindings/timer/nxp,sysctr_timer.txt
new file mode 100644
index 0000000..21f1527
--- /dev/null
+++ b/Documentation/devicetree/bindings/timer/nxp,sysctr_timer.txt
@@ -0,0 +1,26 @@
+NXP System Counter Module(sys_ctr)
+
+The system counter(sys_ctr) is a programmable system counter which provides
+a shared time base to Cortex A15, A7, A53, A73, etc. it is intended for use in
+applications where the counter is always powered and support multiple,
+unrelated clocks.
+
+Required properties:
+
+- compatible :      should be "nxp,sysctr-timer"
+- reg :             Specifies the base physical address and size of the comapre
+                    frame and the counter control, read & compare.
+- interrupts :      should be the compare frames' interrupt
+- clock-frequency : Specifies the counter clock frequency.
+
+Example:
+
+	system_counter: timer@306a0000 {
+		compatible = "nxp,sysctr-timer";
+		reg = <0x0 0x306a0000 0x0 0x10000>, /* system-counter-rd base */
+		      <0x0 0x306b0000 0x0 0x10000>, /* system-counter-cmp base */
+		      <0x0 0x306c0000 0x0 0x10000>; /* system-counter-ctrl base */
+		clock-frequency = <8000000>;
+		interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>;
+	};
-- 
1.9.1